PRINCETON

Phone: +1 (610) 336-7538

INDUSTRIAL SOLUTIONS

Email: sales@princetoninternational.com

 Home  |  New Equipment  |  Used Equipment  |  Plant Liquidations  |  Contact Us

Air Eliminator, Handler, Stripper

•     Dryer

  • Category	Item ID	Capacity	Material	Description
    Dryer	21104		SS	Used Vernitron, Better Built Turbomatic Lab Washer, #3000, all S/S, 30" x 30" x 30" Overall, Unit is 6' high x 42" x 42"
    Dryer	21105		SS	Used Vernitron, Better Built Turbomatic Dryer, #8000, all S/S, 30" x 30" x 30" Overall, Unit is 6' high x 42" x 42"
    Dryer	21107		SS	Used Honeycomb Systems Inc. Dryer, Biddeford, Maine, 21" wide Brass Belt, 5HP S/S Blower, Heat Supply
    Dryer	21111	24	SS	Used Strong Scott Solidaire Dryer, M/N SJS, Size 24" dia x 14' long, 30HP, 188 Final Output RRM, Belt Drive, S/S Construction, ATMOS @ 400 deg.f., Internal 250 PSI Jacket @ 400 deg.f., Built 1974, 1/2" Thick Shell and Jacket, S/O 758887, S/N 223, 24-361

•     Disc Dryer

  • Category	Item ID	Capacity	Material	Description
    Dryer/Disc	21122	27	CS	Used Torus Disc Dryer Model TDJ-26-13 C/S Construction, Rotor and Jacket 150 PSI @ 375 deg.f., S/N TDJ-82000444, Jacket No.DJ-82000444-J, Rotor No TDJ-82000444-S, through approx. 27" wide x 13'4" long, End Bottom Manual Slide Gate Discharge

•     Double Cone, Twin Shell, Tumbling Dryer

  • Category	Item ID	Capacity	Material	Description
    Dryer/Double Cone	20513	25	SS	One used 25 ft3 (0.75m3) Gemco double cone drying system, SS construction, model - Formulator, internal pressure - FV, 30 psi (2 bar) in jacket, gear driven, with bar, 65 lb/ft3 density. With vacuum system, 1990.
    Dryer/Double Cone	22748	70	Hastelloy	DRYER, 70 CU. FT. W.C., HASTELLOY C,  8" VALVE, PREINSUL., DOUBLE CONE DRYER
    Dryer/Twin Shell	22436	75	316 SS	One Used 75 cu. Ft. working capacity (128 cu. Ft. total), full sanitary polish inside and out, 316SS Expert Industries twin shell vacuum dryer/processor. Rated FV internal, SS jacket rated 15 psi @ 250 deg. F.  has vacuum arm and liquid injection intensifier bar.  55 lbs/cu.ft.  density.  Packing gland.  Shell is gear driven by 10 hp 3/60 230/460V, 1755 rpm, U.L. labeled reeves Vari Drive, rated 2.2:1 ratio, thru belt driven Sumitomo disc brake.  Intensifier bar belt driven by approx. 15 hp 3/60/ 230/460V, 1760 rpm, U.L labeled motor.  (2) 18” charge ports with covers.  12”discharge with manual butterfly valve.  Includes solenoid limit switches, and control panel.  Mounted on structural “A” frames.  Used with 165 cfm CS SIHI water seal vacuum pump.  Direct driven by 15 hp, 3/60/ 230/460V, 1755 rpm motor with UL label.  SS vacuum receiver, 30 psi @ 200 deg. F.  2-2” inlet, 2-2” discharge.  Mounted on skid with 14” x 28” straight side.
    Dryer/Double Cone	22747	75	Hastelloy	Gemco Hastelloy C-276, 75 Cu-Ft Double-Cone Vacuum Dryer. Working capacity 75 cu-ft, maximum density 70 lbs per cu-ft. Jacket material 304 SS, interior finish #4B (polished 180 grit). Design pressure 30 psig at full vacuum, jacket 45 psig at 350' F. Total volume 133 cu-ft. Motor: 10 hp explosion proof, 1800 rpm, frame 256T, inverter duty 10:1. 8" TLD valve assembly with discharge cap, top-hinged access cover. Weight of vessel: 7200# empty. SYSTEM AVAILABLE FOR AN ADDITIONAL $100,000.00 A Bulk Bag filling and unloading system including: TAYLOR BULK BAG FILLER MODEL IBC-3000 W/LOAD CELL WASTE SYSTEM SS. BULK BAG UNLOADER TAYLOR MODEL DW-1000, W/LUMP BREAKER 316SS. TAYLOR AUGER SINGLE SPEED FILLER INCLUDING ROLLER, CONVEYOR AND HOPPER. DRUM HANDLER DALMEC CAPACITY 220 LBS. PNEAUMATIC, 260 DEGREE ROTATION. KASON 48" THREE SCREENS 304SS SIFTER MODEL K-48-2
    Dryer/Tumbling	21123	100	316 SS	Used Patterson Double Cone Dryer #1410S, Conoform Vacuum Dryer, 6'9" dia, 100cu.ft. Working Capacity, 150cu.ft. Total, 316 S/S Shell and Jacket, Rated 30 PSI Internal and Jacket, both @ 300 deg.f., NB 1697, 1975, 10HP Motor Drive, 5HP Bar Motor, Pneumatic
    Dryer/Double Cone	21124	234	SS	Used Patterson Double Cone Dryer, Conoform Vacuum Dryer, 8' dia, 234cu.ft. Working Capacity, 164cu.ft. Total, 316 S/S Shell and Jacked, Rated 30 PSI Internal and Jacket, both @ 300 deg.f., NB Rated, 1966, 15HP Varidrive with Spare Varidrive
    Dryer/Tumbling	22745	300		DRYER/BLENDER TUMBLE, 300 GAL PFAUDLER

•     Spray Dryer

  • CategoryName	ProductID	Capacity	Material	ProductName
    Dryer/Spray	22467		321SS	Niro Spray Dryer with Cyclone and Baghouse Max on burner, direct fire 500F normal operation, 750F maximum, fuel rate 30 scfm normal, air rate 3800 scfm, 1.8 MM BTU/hr normal,  2.8 MM BTU/hr maximum, 321 SS housing and plates, cast steel burner, Chamber 12' dia. x 17', 8.7' discharge cone. Design hollow cone spray nozzle, 42.5% solids at 450 kg/hr, 250 Kg evaporation/hr at 500 F STJ-711-10 Sly Turbojet Dust Collector. Moyno feed pump, rotary valves on dryer, cyclone, and baghouse. Twin City fan FN-380 rated at 5950 cfm, 28", 2361 rpm.
    Dryer/Spray	23334		SS	One Used ANHYDRO Lab Spray Dryer. Yr. 1974, Type LABS1.  Approx. 3.5 ft. Diameter.
    Dryer/Spray	23350		SS	One Used Bowen Spray Dryer.  Approx. 7.5' Diameter, Cone Bottom.  Converted to Natural Gas.  Including Centrifugal Atomizer controlled by a VFD, dust control System (Blower, Cyclone, Scrubber, etc.) More Information on File. Structural Steel also Available.
    Dryer/Spray	23351		SS	One used  SS ANHYDRO Spray Dryer, Approx. 11' dia. Natural Gas, Flat Bottom, Centrifugal Atomizer, Dust control (Cyclone, Scrubber, etc.) Structural Steel also available.
    Dryer/Spray	21113	24	SS	Used 42" dia Mazzoni Pilot Plant Vacuum System, S/S Contact PArts, Last Used on Soap, Unit Consists of Jacketed Feed Tank, M/N ME-2.5, 42" dia x 24" Straight Side with 3' Cone Bottom, Heated Shell Vacuum Spray Dryer, Spray Nozzle Atomization with Side, Top & Cone Scrapers, Jacketed Plodder/Refiner with Pelletizing Head and Cut-off Knife, Heat Exchanger, Vacuum Pump, Cyclone Collector, Surface Condenser with Condensate Collector, approx. 150 Kg/Hr of Soap Products
    Dryer/Spray	21112	34	SS	Used Lab Niro, Mfg. in Denmark, approx. 34" dia x 24" Straight Side on S/S Stand, S/S Control Cabinet on Wheels, Parts Only

•     Fluid Bed Dryer

  • Category	Item ID	Capacity	Material	Description
    Dryer/Fluid Bed	22741			DRYER, FLUID BED, FITZPATRICK
    Dryer/Fluid Bed	22742			DRYER, FLUID BED, FITZPATRICK
    Dryer/Fluid Bed	23307	0	SS	FITZPATRICK MODEL FA-250 FITZAIRE FLUID BED DRYER. SERIAL #285. 5' W X 7'-10" L X 8'-4" HEIGHT. HOTWATER HEATED POWERED BY 1/2 H.P. AGITATOR. W/20 H.P. BLOWER. STAINLESS STEEL CONSTRUCTION.
    Dryer/Fluid Bed	23305	60		GLATT FLUID BED DRYER/COATER/GRANULATOR, MODEL GPCG60, PHARMACEUTICAL GRADE STAINLESS STEEL, 10 BAR UNIT, EXPLOSION PROOF, 100ºC MAXIMUM OPERATING TEMPERATURE, COMPLETE WITH 100 LTR (30KG) BOWL, 220 LTR. (60 KG) BOWL, INLET AIR SYSTEM, INLET AIR BYPASS SYSTEM, EXHAUST AIR, FILTER HOUSING/FAN, PUMPING SYSTEM, WASH IN PLACE NOZZLES, SUSSMAN CLEAN STEAM GENERATOR, DATA PLUS MODEL 1250AF CONTROL PANEL. THIS UNIT WAS MANUFACTURED NEW IN NOVEMBER OF 1998 AND IS IN LIKE NEW CONDITION. COMPLETE SPECIFICATIONS AVAILABLE UPON REQUEST.
    Dryer/Fluid Bed	23303	120	SS	ONE (1) Used Glatt Granulating Fluid Bed Dryer, Model WSG-120, dry load capacity is 110-220 lbs., heating capacity is 640,000 BTU/hr., air warming range is 50-180 degrees F, 425L capacity, 15 cu. ft., full stainless steel construction, 1986
    Dryer/Fluid Bed	23304	120		ONE (1) Used Glatt Granulating Fluid Bed Dryer, Model WSG-CD120PD, stainless steel construction, dry load capacity120-180 kg., max. air volume 6000 cubic meters/hr., Model WAB-LP-A Solo Spray Pump, .25 KW with .42 cubic meter container, with controls and spare cart
    Dryer/Fluid Bed	23308	120		FLUID BED DRYER, WORLEY, RATED FOR 120 KG (260 LB.) BATCHES. PRODUCT CONTACT PARTS ARE PORTABLE, POLISHED, SANITARY, STAINLESS STEEL CONTAINERS (BASKETS), 47" DIA. X 20" DEEP. STEAM HEATED THROUGH S/ST FIN TUBE COILS. GALVANIZED STEEL HOUSING WITH EXPLOSION FLAPS & DUST COLLECTOR. 30 HP BLOWER AND CONTROLS. NEW 1973. GOOD CONDITION. INCLUDES LIFTING/DISCHARGE DEVICE WHICH RAISES CONTAINER, TILTS IT 180 DEGREES, AND ROTATES IT AROUND THE CENTER AXIS OF THE LIFT COLUMN SO THAT THE DRY PRODUCT DROPS OUT.
    Dryer/Fluid Bed	20510	150	SS	One Used 150 Kg. Aeromatic Fluid Bed Dryer, Model T-5, Stainless Steel, 2 bar pressure.
    Dryer/Fluid Bed	20511	250	316 SS	One used 250 Kg. Fluid Bend Dryer manufactured by Fluid-Aire, batch type, 316 SS construction, with (2) agitated product bins, with steam heating system , blowers, Hepa filters and interconnecting ductwork.
    Dryer/Fluid Bed	23309	300		Niro Aeromatic Fluid Bed, Model-s-6 300 kilos batch size, with 3 product bowls. One R&D size. Complete air-handling system, has manuel and service records. Removal included, in excellent working condition.
    Dryer/Fluid Bed	20512	400	316 SS	One used 400 Kg. Fluid Bed Dryer, manuf. By Fluid-Aire, 316 SS, with (2) agitated product bins, with steam heating system, blowers, Hepa filters and interconnecting ductwork.
    Dryer/Fluid Bed	23306	470		Fitzpatrick Fluid Bed Dryer. Machine is complete with control panel, heating system, blower and two product bowls. Machine's capacity 190-470 lbs, fan rated 2200 cfm, 25 HP.

•     Freeze Dryer

  • Category	Item ID	Capacity	Material	Description
    Dryer/Freeze	21239		SS	6sq.ft., Virtis Freeze Dryer, all S/S Construction, M/N 25-SCR-4, Unit has 4 Shelves 12" wide x 17.5 deep, Solid Glass Front Door, Unit in Shelf Contained S/S Cabinet with Vacuum & Refrigeration Sysems & all Controls, Capable of Minus 40 deg.c. and 5 Microns Absolute Vacuum, S/N 25-8-80-3
    Dryer/Freeze	21254			Used Varian, Diffusion Pump on Stand, Type 0159, 120 Volt, S/N 1KO15
    Dryer/Freeze	21255		SS	Used Virtis #25SL Freezmobile, 10" dia x 20" deep Chamber, Solid Glass Front Door, Unit is Self-Contained S/S Cabinet with Vacuum & Refrigeration System, all Controls, S/N 201231, Item #259408
    Dryer/Freeze	21256		SS	Virtis #24 Freezmobile, 10" dia x 20" deep Chamber, Solid Glass Front Door, Unit is Self-Contained S/S Cabinet with Vacuum & Refrigeration System, all Controls
    Dryer/Freeze	21257		SS	Virtis Unitop, 800L, 4 Trays, S/S 20" x 10" wide, Item Number 148452, S/N 201010, M/N 6206-0800 Series 1002, Heating-Cooling Unit, S/N 1002, M/N 6206-0650-0C
    Dryer/Freeze	21258			Used Virtis Units #10-145 MR-BA, S/N 1258, MRSA

•     Shelf Dryer

  • Category	Item ID	Capacity	Material	Description
    Dryer/Shelf	22746	32		DRYER, TRAY, V-TYPE, CONICAL DRYER/BLENDER, 32 CU. FT. CAP., OPERATION @ 21 CU. FT.
    Dryer/Shelf	21119	73	CS	Stokes Vacuum Shelf Dryer, M/N 338 H-6 C/S Construction, 44" x 40" Shelves, 73.3sq.ft., Rated Full Vacuum Internal, Jacketed Shelves, S/N 73229

•     Rotary

  • Category	Item ID	Capacity	Material	Description
    Dryer/Rotary	22470	6		HORNOS ROTATORIOS HORIZONTALES, MCA. ALLIS-CHALMERS TAM. 2.45 X 58.00 M DE LONGITUD, CAPACIDAD DE CARGA 6 TONS/HR SERIE 2271, CON QUEMADOR DE COMBUSTIBLE MIXTO TIPO CAÑON, CON SISTEMA  DE TRANSMISION POR CORONA Y PIÑON, REDUCTOR DE VELOCIDAD Y MOTOR ELECTRICO DE 50 HP

•     Twin Screw Processor

  • Category	Item ID	Capacity	Material	Description
    Processor/Twin Screw	21084		SS	Used Readco Twin Screw Processor, 6" x 36" Heavy Duty, 1977, S/N 105593, S/S, C/S Jacket, 40HP Reeves Varidrive, 87.5-350 RPM Out
    Processor/Twin Screw	21283	5	SS	Unused Werner & Pfleiderer, Model CMM 45 Twin Screw Continuous Mixer, 45mm Counter Rotating Screws, S/S Construction, Electrically Heated, Driven by 5HP, DC Motor with Reducer Mounted on Base with Casters, Cooled Bearings, Unit Complete with Control Panel and Spare Parts, S/N 180156, 1986