Heat Exchangers
Princeton Industrial Solutions Sells New, Used and
also Refurbishes Heat Exchangers. |
  |
- Block
-
|
Category |
Item
ID |
Capacity |
Material |
Description |
|
Exchanger/Block |
22720 |
178 |
Graphite/CS |
GRAPHITE BLOCK,
CARBONE, CS SHELL, 178 SQ FT, 100 PSIG/FV @ -4-360F |
- Tube and
Shell
-
|
Category |
Item
ID |
Capacity |
Material |
Description |
|
Exchanger/Tube and Shell |
21192 |
|
BRASS |
Unused
Patterson Kelley Heat Exchanger, Tubes & Shell are 150 @ 350
deg.f., Carbon Body, 1/2" Brass Tubes, U-Tube |
|
Exchanger/Tube and Shell |
21195 |
|
|
Misc.
Heat Exchngers all with Tags |
|
Exchanger/Tube and Shell |
21207 |
|
Bronze |
Unused
Heat Exchanger, C/S Shell and Bronze Tubes both Rated @ 150 PSI @
175, S/N Q-50614, 1974, #408513, OF 1015-24, approx. 12" dia
x 16' long |
|
Exchanger/Tube and Shell |
21210 |
|
SS |
Used
Surface Area Reboiler, S/S Tubes Rated 75 PSI @ 400 deg.f., S/S
Shell Rated 50 PSI/Full Vacuum @ 300deg.f., S/S Heads, 48"
Overall Dia x 226" Overall length, Built by Richmond
Engineering, S/N L-1731, NB #51844, 2 Steel Saddles |
|
Exchanger/Tube and Shell |
22691 |
|
|
EVAPCO
EVAPORATOR CONDENSER |
|
Exchanger/Tube and Shell |
22707 |
|
|
CONDENSERS
FOR RV-16 |
|
Exchanger/Tube and Shell |
22818 |
|
|
HEAT
EXCHANGER, 10" DIA., SHELL/TUBE - MAX. 150 PSI @ 100 DEG. F,
MIN. 150 PSI @ -20 DEG. F, BUILT IN 1996 |
|
Exchanger/Tube and Shell |
22819 |
|
|
HEAT
EXCHANGER, 10" DIA., SHELL/TUBE - MAX. 150 PSI @ 100 DEG. F,
MIN. 150 PSI @ -20 DEG. F, BUILT IN 1996 |
|
Exchanger/Tube and Shell |
22719 |
10 |
316 |
CS
SHELL, 316 SS TUBES, 10 SF |
|
Exchanger/Tube and Shell |
22816 |
12 |
CS |
STEAM
HEATER, 12.75 ft2 CS/ CS 150#/FV
w/ HE1-TD02 |
|
Exchanger/Tube and Shell |
22716 |
18 |
316 |
6-48
BE vertical shell/tube,18 sq.ft.HTA, PO#018919, 316 ss TUBE |
|
Exchanger/Tube and Shell |
21219 |
20 |
SS |
Used
Heat Exchanger, 20sq.ft., 150/150 PSI both Sides @ 500 deg.f., NB
Rated, Mfg. by Distillation Engineering, Condensing on Shell,
6" In/4" Out, S/S Wetted Parts |
|
Exchanger/Tube and Shell |
21191 |
25 |
SS |
Unused
Yula Heat Exchnger/Condenser, Polished S/S Shell, Rated @ 150 PSI
@ 400 deg.f., Titanium Tubes Rated @ 150 PSI @ 400 deg.f., U-Tube,
25sq.ft., C/S Tube Sheet & No Bonnet |
|
Exchanger/Tube and Shell |
21215 |
25 |
SS |
Used
ITT Fluid Handling Division, approx. 25sq.ft. Horizontal U-Tube
Heat Exchanger, C/S Shell is approx. 8" dia x 58" long
with (2) 4" Openings, S/S Tubes are 3/4" dia, Shell and
Tubes both Rated 150 PSI @ 375 deg.f., S/N 87M81091-01-1, NB #456 |
|
Exchanger/Tube and Shell |
21213 |
27 |
SS |
Used
Patterson Kelley approx. 27sq.ft., Horizontal U-Tube Heat
Exchanger, C/S Shell is approx. 8" dia x 66" long with
(2) 4" Openings, 3/4" dia S/S Tubes, Shell and Tubes
both Rated 150 PSI @ 350 deg.f., S/N 252457, NB 43000 |
|
Exchanger/Tube and Shell |
21214 |
33 |
SS |
Used
Heat Transfer approx. 33sq.ft. Horizontal Shell and Tube Heat
Exchanger, approx. 8" dia x 34" long C/S Shell,
5/16" dia S/S Tubes, S/S Tube Steel Tube Sheet, Shell and
Tubes, both Rated 75 PSI @ 250 deg.f., Shell hs (2) 1 3/4"
dia Threaded Nozzles Head has (1) 4" Flange, other Head has
(1) 4" Flange and (1) 2" Elbow Flange, S/N
6-01178-01-11, NB #19940, M/N CP |
|
Exchanger/Tube and Shell |
22713 |
34 |
316 |
34
ft2, 6" - 36", 316 SS/316 SS, 225#/FV, BEM |
|
Exchanger/Tube and Shell |
21194 |
40 |
SS |
Doyle
& Roth, S/S Wetted Parts, 75/FV both Int @ 350 deg.f., One
Pass, approx. 40sq.ft. |
|
Exchanger/Tube and Shell |
22694 |
40 |
Glass |
GLASS
SHELL, GLASS SPIRAL INTERNAL COIL, 40 SW FT, DP SHELL 8 PSIG, DP
COIL 40 PSIG @ 300F |
|
Exchanger/Tube and Shell |
22703 |
40 |
Glass |
GLASS
SPIRAL TYPE CONDENSER, 12" DAI X 36" LONG, 40 SQ FT HTA,
40 PSIG @ 300F, WESTCHEM HEU 12/40 |
|
Exchanger/Tube and Shell |
22704 |
40 |
Glass |
GLASS
SPIRAL TYPE CONDENSER, 12" DAI X 36" LONG, 40 SQ FT HTA,
40 PSIG @ 300F, WESTCHEM HEU 12/40 |
|
Exchanger/Tube and Shell |
22705 |
40 |
Glass |
GLASS
SPIRAL TYPE CONDENSER, 12" DAI X 36" LONG, 40 SQ FT HTA,
40 PSIG @ 300F, WESTCHEM HEU 12/40 |
|
Exchanger/Tube and Shell |
22700 |
45 |
Graphite/CS |
GRAPHITE
BLOCK TYPE, CS SHELL, 453 FT HTA, 26" DIA X 90" LONG,
100 PSIG/FV @ -4 TO 360F, CARBONE 2450-38 |
|
Exchanger/Tube and Shell |
21221 |
48 |
SS |
Used
Heat Exchanger 48sq.ft., Mfg. by Perry Products, NB 4332, 1992, 75
PSI both Sides @ 350 deg.f., C/S Shell, S/S Wetted Parts, 6"
dia x 12" long |
|
Exchanger/Tube and Shell |
21196 |
50 |
SS |
Used
Heat Exchangers, ITT Fluid Handling, approx. 50sq.ft., NB #456,
2987, 8" dia x 60" S/S U Tubes, C/S Shell, both Rated @
150 PSI @ 375 deg.f., 4" In/Out on Shell, 2" In/Out on
Tubes, 316 S/S Head |
|
Exchanger/Tube and Shell |
21208 |
50 |
SS |
Unused
Heat Exchanger, Croll Reynolds Model 3X, S/S, 15 PSI, both Sides,
U Tube approx. 50sq.ft., 8' long x 9" dia |
|
Exchanger/Tube and Shell |
22714 |
50 |
316L |
HEAT
EXCHANGER, SHELL AND TUBE TYPE, 50 SQ FT AREA, 6" SHELL SIZE,
C.S. SHELL MATL., 96" TUBE SIZE, 316 LSS TUBE MATL., |
|
Exchanger/Tube and Shell |
22715 |
50 |
316L |
50
ft2, 6"-96", BEM, 316 LSS, 150#/FV (t)/ CS 75#/FV (S),
VACUUM PUMP AFTERCOOLER |
|
Exchanger/Tube and Shell |
21212 |
52 |
SS |
Used
Croll Reynolds U-Tube Surface Condenser, approx. 52sq.ft., Rated
150 PSI @ 300 deg.f., and 40 Gallons/Minute @ 35 deg.f., S/S Shell
Tubes and Tube Sheet, C/S Head, Shell has approx. 9" dia x
92" long, (1) 3" (1) 1.5" Opening on Shell, S/N
52455, M/N 508 |
|
Exchanger/Tube and Shell |
22689 |
53 |
Hastelloy |
8"
DIA. X 5' L SHELL-CS, HASTELLOY C TUBES, 53 SF WITH (3) 1.4 kW
HEATERS CENTRIFUGE VENT CONDENSER |
|
Exchanger/Tube and Shell |
22690 |
53 |
Hastelloy |
8"
DIA. X 5' L SHELL-CS, HASTELLOY C TUBES, 53 SF WITH (3) 1.4 kW
HEATERS CENTRIFUGE VENT CONDENSER |
|
Exchanger/Tube and Shell |
22692 |
53 |
CS |
CS
SHELL - 316 SS TUBES 53 ft2 8" x 5' |
|
Exchanger/Tube and Shell |
22755 |
62 |
ss |
GLYCOL
HEATER, CS SHELL, SS TUBES, 61.6 SQFT "U"-TUBE |
|
Exchanger/Tube and Shell |
21220 |
75 |
|
Used
Heat Exchanger, 75sq.ft., 150/150 PSI both Sides @ 350 deg.f.,
1963, NB Rated, Mfg. by Patterson - Kelley, (100) 11/16' Tubes x
4' long, Vertical |
|
Exchanger/Tube and Shell |
21193 |
80 |
SS |
Used
Heat Exchanger, S/S Wetted Parts, 75/E/V S/S @ 320 deg.f., approx.
80sq.ft. |
|
Exchanger/Tube and Shell |
22718 |
80 |
316 |
80 ft2
CS/ 316 SS 225 #/ FV
w/ XP1-TD02 DRYER AFTER CONDENSER |
|
Exchanger/Tube and Shell |
22717 |
85 |
316 |
85 ft2
CS/ 316 SS 225 PSIG/
FV w/ XP1-TD02 DRYER PRECONDENSER |
|
Exchanger/Tube and Shell |
22693 |
89 |
Graphite/CS |
CONDENSER,
89 SQFT, 26"DIA x 34"LONG, CS SHELL, GRAPHITE BLOCK
TYPE, CARBONE, MODEL 2410-38, 100 PSIG/FV @ -4-360F |
|
Exchanger/Tube and Shell |
21198 |
100 |
SS |
Used
Doyle & Roth Heat Exchanger, approx. 100sq.ft., S/S Shell
& Tubes, NB 13397, 1987, S/N J5227 150 PSI both Sides, Two
Pass |
|
Exchanger/Tube and Shell |
21222 |
113 |
SS |
Used
Heat Exchanger 113sq.ft., Mfg. by Perry Products, NB 4332, 1992,
75 PSI both Sides @ 350 deg.f., C/S Shell, S/S Wetted Parts,
10" dia x 14" long, U Tube |
|
Exchanger/Tube and Shell |
22817 |
119 |
CS |
BRINE
COOLER, 119 ft2 CS / CS 150 PSIG W/ HE1-TD02 |
|
Exchanger/Tube and Shell |
21202 |
125 |
SS |
Used
Patterson Kelly, Heat Exchanger, approx. 125sq.ft., C/S Shell, S/S
Tube, NB 25823, 1972, S/N 219865, Two Pass |
|
Exchanger/Tube and Shell |
22757 |
126 |
316 |
GLYCOL
HEATER, SHELL & TUBE, U-TUBE REMOVABLE 316 SS BUNDLE, CS
SHELL, 125.5 SQ FT HTA |
|
Exchanger/Tube and Shell |
22712 |
134 |
316 |
CS
SHELL 100#/FV, 316 SS TUBES 75#/FV, 134 SF 10" x 8' |
|
Exchanger/Tube and Shell |
21199 |
150 |
CS |
Used
Patterson Kelly, Heat Exchanger, approx. 150sq.ft., C/S Shell, NB
26177, 1972, S/N 220207, 150 PSI both Sides |
|
Exchanger/Tube and Shell |
21200 |
150 |
|
Used
Acme Industries, Heat Exchanger, approx. 150sq.ft., C/S Shell, NB
81066, 1971, S/N 81066, 200 PSI @ 300 deg.f. |
|
Exchanger/Tube and Shell |
22501 |
156 |
304SS |
1999
reboiler. New, never installed. 156sqft vertical BEM. Tubes:
304/304L 130psig&FV @ 400F. Shell: CS 190psig&FV @ 600F. |
|
Exchanger/Tube and Shell |
21206 |
163 |
SS |
Unused
Condenser, 163sq.ft., S/S Shell, Rated 100 PSI @ 500 deg Tubes,
s/S Shell Rated @ 40/FV @ 500 deg.f., NB 873, 1989 |
|
Exchanger/Tube and Shell |
22696 |
163 |
Hastelloy |
20"
DIA x 30" LG, CS SHELL, HASTELLOY C-276 TUBES, AREA 163 Ft2,
100 PSIG/FV @ -4 TO 360F |
|
Exchanger/Tube and Shell |
22502 |
165 |
SS |
TWO
(2) Used 165 sq. ft. Young Heat Exchangers, (224) 3/8" O.D. x
7'6" L stainless steel tubes, rated 150 PSI @ 400 degrees F,
stainless steel shell rated 300 PSI @ 400 degrees F, 2 1/2"
inlet/outlet tube side, 3 1/2" inlet/outlet shell side, Model
SSF-810-AR-2P, Part #258692. |
|
Exchanger/Tube and Shell |
22503 |
175 |
SS |
ONE
(1) Used Buxton Mfg. Shell and Tube Heat Exchanger, 175 sq. ft.
surface area, (89) 3/4" O.D. x 10' long tubes, stainless
steel tubes, tube sheets and bonnets, carbon steel shell rated 190
PSI @ 350 degrees F, 6", 3" tubes inlet/outlet, 3"
shell inlet/outlet, Model 6S-1-12-10-EJ-SP,Serial No. 885-9A,
1998.
|
|
Exchanger/Tube and Shell |
22454 |
183 |
HASTELLOY |
ONE
(1) Used Stellite Div. Cabot Corp. Shell & Tube Heat
Exchanger, approx. 183 sq. ft. surface area, (85) 3/4"
diameter x 11' long tubes, Hastalloy B Tubes, tube sheets and
bonnets rated 150 PSI @ 500 degrees F, carbon steel shell rated
150 PSI @ 550 degrees F, 3" shell inlet/outlet, 3", (2)
2" tubes inlet/outlet, |
|
Exchanger/Tube and
Shell |
22500 |
188 |
304SS |
1999
exchanger, New, never installed. 188sqft horizonal AEU, Tubes:
304/304L 130psig&FV @ 400F. Shell: CS 190psig&FV @ 600F
Shell: 190 psig @ FV @ 600F, 1 pass, Mat'l SA106B
Tube: 130 psig @ FV @ 400F, 2 passes, SA249TP304/304L, 27 U's @
3/4"OD x .083"AW x 18'-0" Pitch 15/16"
Weight dry: 1900 pounds
Nozzles: Shell are 300# RFSO, 4" inlet, 2" outlet, 1
1/2" vent
Tubes are 150# RFSO, 4" inlet, 4" outlet
|
|
Exchanger/Tube and Shell |
22722 |
192 |
Hastelloy |
SHELL
& TUBE CONDENSER, HASTELLOY C-276 TUBES, HASTELLOY LINED
HEADS, 192 SQ FT HTA, 44" TUBES, 75-13/16" OAL, 20"
DIA CS SHELL, 100 PSIG/FV @ -4 TO 350F |
|
Exchanger/Tube and Shell |
22504 |
193 |
SS |
ONE
(1) Used 193 sq. ft. Gifco Shell & Tube Heat Exchanger,
stainless steel tubes and tube sheets, carbon steel shell, (94)
1" diameter x 8' L tubes rated 150 PSI or F/V at 360 degrees
F, 150 PSI at 360 degrees F shell, 3" inlet/outlet tube side,
3" inlet/outlet shell side, 2" relief valve tube side,
Serial #85-135-A, National Board No. 027 |
|
Exchanger/Tube and
Shell |
22505 |
195 |
304SS |
TWO
(2) Used 195 sq. ft. Industrial Welding Shell and Tube Heat
Exchanger, 304 stainless steel tubes and tube sheets, carbon steel
shell, (94) 1" diameter tubes x 8' L rated 150 PSI or F/V at
360 degrees F, 150 PSI at 360 degrees F shell, 3/4" tubes
inlet/outlet, 3" shell inlet/outlet, 18" diameter shell,
approx. 11' overall length, Serial Nos. 78-113-1 and 78-113-2,
National Board Nos. 530 and 531.
|
|
Exchanger/Tube and
Shell |
23328 |
196 |
CS |
UNUSED
Hot Oil Heat Exchanger
MFR DOYLE &ROTH MFG.
Div. 1
Length 9 ft 2 in
Diam 12 ¾ in.
Sq ft. 196
S/S tubes shell carbon steel
Shel press. 100 psi tube press 100 psi
Temp.350 deg. F.
Condition-UNUSED |
|
Exchanger/Tube and Shell |
22506 |
200 |
304SS |
HEAT
EXCHANGER. APPROXIMATELY 200 SQ. FT. 304 S/ST TUBE, 302 S/ST HEAD,
C/ST SHELL, HORIZONTAL, APPROX. 120 TUBES, 3/4" OD X 10'LONG.
(2) BONNET HEADS, UNIT MEASURES 12" X 12' LONG. UNIT HAS (2)
3" TUBE SIDE INLETS AND (2) 2" SHELL SIDE INLETS. 150
psi INT/ Shell
|
|
Exchanger/Tube and
Shell |
22447 |
220 |
HASTELLOY |
UNUSED
HEAT EXCHANGER, APPROX. 220 SQ. FT., HASTELLOY C-276 TUBES, 316L
S/ST HEAT/SHELL, VERTICAL, MANUFACTURED BY DOYLE AND ROTH, NEW IN
1999, S/N J9071-2, NB#18684, TYPE BEM. SHELL RATED FOR 150 PSI/FV
@ 351ºF/-40ºF, TUBES RATED FOR 150 PSI/FV @ 351ºF/-40ºF, 126
TUBES, 3/4" OD, 18 GAUGE, 6' LENGTH, ROLLED TUBES, (1) BONET
HEAD, (1) DISHED HEAD, OVERALL DIMENSIONS 12" DIA. X
12'6" LONG. UNIT HAS (2) 2", (1) 8" SIDE INLETS AND
(2) 3" SIDE INLETS. |
|
Exchanger/Tube and Shell |
22723 |
237 |
Tantalum |
TANTALUM
TUBE, CS SHELL, 14" DIA X 170-3/8" OAL, 237.4 SQ FT, 150
PSIG/FV @ -20 TO 293F |
|
Exchanger/Tube and Shell |
22756 |
252 |
ss |
GLYCOL
COOLER, CS SHELL, SS TUBES, 252.5 SQFT |
|
Exchanger/Tube and Shell |
22758 |
252 |
316 |
GLYCOL
COOLER, SHELL & TUBE, U-TUBE REMOVABLE 316 SS BUNDLE, CS
SHELL, 252.48 SQ FT HTA |
|
Exchanger/Tube and Shell |
22759 |
252 |
316 |
GLYCOL
COOLER, SHELL & TUBE, U-TUBE REMOVABLE 316 SS BUNDLE, CS
SHELL, 252.48 SQ FT HTA |
|
Exchanger/Tube and Shell |
22698 |
257 |
SS/CS |
CONDENSER,
12" DIA X 167" LONG, CS SHELL, SS TUBES, 257 SQFT, 150
PSIG/FV AT 400F |
|
Exchanger/Tube and Shell |
22708 |
257 |
316 |
257 SQ
FT, 316 SS TUBE, CS SHELL, REPCO |
|
Exchanger/Tube and Shell |
22709 |
258 |
SS |
CONDENSER
FOR RV-18, 258 sq. ft. HTA, Stainless Steel Tube, CS shell |
|
Exchanger/Tube and Shell |
22710 |
258 |
SS |
CONDENSER
FOR RV-19, 258 sq. ft. HTA, Stainless Steel Tube, CS shell |
|
Exchanger/Tube and Shell |
21218 |
270 |
304 SS |
Unused
Mitternight 270sq.ft., Vertical Heat Exchanger, 18" dia x
7'8" long T-304 S/S Shell |
|
Exchanger/Tube and Shell |
22820 |
277 |
316 |
277
ft2 CS/316 SS 12"- 180" BEM 150 PSIG/FV (SHELL),
75PSIG/FV (TUBE) |
|
Exchanger/Tube and Shell |
22695 |
297 |
Hastelloy |
HASTELLOY
C-276 TUBES, C.S. SHELL, 20" OD x 58", 297 SQFT HTA, 90
PSIG/FV @ -4 TO 350F, 89-13/16" OAL |
|
Exchanger/Tube and Shell |
22702 |
297 |
Hastelloy |
CONDENSER,
4000 GAL., HASTELLOY C-276 TUBES, C.S. SHELL 20" OD x
58" OAL AREA, 297 ft2 |
|
Exchanger/Tube and Shell |
22706 |
356 |
Graphite/CS |
GRAPHITE
BLOCK TYPE CONDENSER, 356 Ft2
HTA, 100 PSIG/FV @ -4 TO 360F, 26" DIA X 77" CARBONE
2440-38 |
|
Exchanger/Tube and Shell |
21216 |
400 |
SS |
Used
approx. 400sq.ft. Surface Area U-Tube Condenser S/S Shell and
Tubes, C/S Head, 3/4" Overall Dia on Tubes, Shell 18" x
9'6" long, S/S Tubes Rated 75 PSI @ 150 deg.f., 2 Steel
Saddles, Atlas Mfg. Shell Rated 145 PSI @ 500 deg.f., S/N 4968, NB
#4099 |
|
Exchanger/Tube and Shell |
22697 |
453 |
Graphite/CS |
GRAPHITE
BLOCK TYPE, C.S. SHELL: 26" OD x 91" OAL, AREA 453 SQFT,
CARBONE 2450-38 |
|
Exchanger/Tube and Shell |
22711 |
480 |
316 |
CS
SHELL 150 PSIG/FV, 316 SS TUBES 150 PSIG/FV, 479.6 SQ FT HTA
20" x 89" SHELL, 118" OAL |
|
Exchanger/Tube and Shell |
21217 |
490 |
304 SS |
Used
approx. 490sq.ft. Surface Area U-Tube Condenser 22" dia x
10'6" long, (126) 3/4" 16 Gage Type 304 L S/S Tubes
Rated 125 PSI @ 200 deg.f., Type 304 S/S Shell Rated 100 PSI @ 250
deg.f., C/S Head, 2 Steel Saddles, (2) 11" and (1) 3
1/2" Opening Shell Side, (2) 1/2" Openings Tube Side,
Lucy Boiler Mfg., 1995, S/N 2466, NB #1621 |
|
Exchanger/Tube and Shell |
22815 |
750 |
316 |
HEAT
EXCHANGER, 27" DIA. x 14' OVERALL, 750 SQ.FT., CS SHELL,
316SS TUBES, 150 PSIG/FV @ -4 TO 100F, PO#1001496 |
|
Exchanger/Tube and Shell |
22699 |
1000 |
Graphite/CS |
CONDENSER,
1000 GAL., 24" DIA x 48" LONG, CS SHELL, GRAPHITE TUBES,
AREA 178 Ft2, 100 PSIG/FV @ -4 TO 360 F |
|
Exchanger/Tube and Shell |
22701 |
4000 |
Graphite/CS |
CONDENSER,
4000 GAL., C.S. SHELL: 26" OD x 90" OAL, AREA 453 ft2,
CS SHELL, GRAPHITE BLOCK TYPE, CARBONE #2450-38, 100 PSIG/FV @ -4
TO 350F |
- Plate and Frame
-
|
Category |
Item
ID |
Capacity |
Material |
Description |
|
Exchanger/Plate
and Frame |
21205 |
|
SS |
Used Ertel,
12" Round, S/S, Plate and Frame Filter, approx. 15 Plates
& Frame, S/S on Stand |
|
Exchanger/Plate
and Frame |
21223 |
7 |
SS |
Used APV, Plate
Heat Exchanger, S/S, 1991, 3/4" In/Out, approx. 7sq.ft. |
|
Exchanger/Plate
and Frame |
21224 |
20 |
SS |
Used Mueller Plate
Heat Exchanger, S/S, 1" In/Out, approx. 20sq.ft. |
|
Exchanger/Plate
and Frame |
21197 |
66 |
|
Schmit Plate Heat
Exchnger 66sq.ft., 1987, S/N Sigma HWH, 100 PSI @ 150 deg.f. |
|
Exchanger/Plate
and Frame |
21209 |
66 |
|
Used Plate Heat
Exchanger Sigma, 29 KWW, 100 PSI @ 280 deg.f., 66 sq.ft. |
|
Exchanger/Plate
and Frame |
21203 |
125 |
|
Used Plate Heat
Exchangers, 1047.1sq.ft., Mfg. by Tranter, 1983 Wichita Falls, TX,
S/N P-28566-IJ, M/N UX-426-U-130, 150 PSI @ 100 deg.f., approx.
135 Plated 2' wide x 6' high, S/S, 6", 150# |
|
Exchanger/Plate
and Frame |
22507 |
200 |
SS |
Cherry Burrell Heat
Exchanger, plate type, model as-100 stainless steel complete with
divider block with approx. 60 plates measuring 12" x 42"
for 200 sq/ft of heat transfer.
|
|
Exchanger/Plate
and Frame |
22508 |
207 |
SS |
One Used
STRUTHERS-WELLS Vertical; 207 sq. ft. Heat Exchanger.
SS tubes 100psi/FV @ 300, CS Shell 150psi. (88) One pass
tubes @ 3/4" OD x 12' L.
Shell diameter = 12".
OAL = 15'7". |
|
Exchanger/Plate
and Frame |
22509 |
230 |
304SS |
One used
approx 230 sq. ft. PATTERSON KELLY Heat Exchanger.
Approx. (118) 3/4" OD x 10 ' lgth. 304 SS tubes.
150psi @ 250; 304SS shell, 150 psi@250, 4 pass |
- Karbate
-
|
Category |
Item
ID |
Capacity |
Material |
Description |
|
Exchanger/Karbate |
21204 |
|
Karbate |
Used Carbone of
America, Karbate Block Heat Exchanger, approx. 3' x 2' x 2',M/N K
300/150, S/N 9054, 1993, Design Press, 50/75, 360 deg |
|
Exchanger/Karbate |
20524 |
64 |
Karbate |
UNUSED Karbate Type 64
Sq. Ft. Inside; 912 Sq. Ft. Outside, Union Carbide Condenser.
Shell pressure 75 psi, tube pressure 75 psi @340F.
125 1/4 length |
|
Exchanger/Karbate |
21225 |
150 |
Karbate |
Used Karbates,
Shell and Tube, 150-225sq.ft., 75/75 both @ 350 deg.f |
|
Exchanger/Karbate |
21229 |
150 |
Karbate |
Used Karbates,
Block, 150-200sq.ft., 75/75 both @ 350 deg.f. |
|
Exchanger/Karbate |
21226 |
250 |
Karbate |
Used Karbates, Heat
Exchanger, Mfg. by Kearney, 250sq.ft., 1988, 75 PSI both Sides @
360 deg.f., (85) 1 1/4" x 9' long Tubes, NB #1087, S/N
9614-1809, Overall is 16" dia x 133" long, Use on HCL,
etc. |
|
Exchanger/Karbate |
21227 |
250 |
Karbate |
Used Karbates, Heat
Exchanger, Mfg. by Caarbone of America, 250sq.ft., 1993, 75 PSI
both Side @ 360 deg.f., (85) 1 1/4" x 9' long Tubes, NB 244,
Overall is 18" dia x 132" long, Use on HCL, etc. |
|
Exchanger/Karbate |
21228 |
250 |
Karbate |
Used Karbates, Heat
Exchanger, Mfg. by Carbone Polyblock, 250sq.ft., 1990, 75 PSI both
side @ 360 deg.f., (85) 1 1/4" dia x 132" long, Use on
HCL, etc. |
- Spiral
-
|
Category |
Item
ID |
Capacity |
Material |
Description |
|
Exchanger/Spiral |
21201 |
|
|
Used Spiral Heat
Exchanger, American Heat Reclaiming |
|
Exchanger/Spiral |
21211 |
25 |
316 SS |
Used Alfa Laval
Type 1C, approx. 25sq.ft. Spiral Heat Exchanger, Rated 150 PSI @
400 deg.f., Type 316 S/S Shell, 0.109" Thick C/S Heads,
1.18" Thick, Shell has (2) 2" Openings, each Head has
(1) 2" Opening, S/N L-15570, NB 12250 |
|
Exchanger/Spiral |
22721 |
40 |
Glass |
GLASS SHELL, GLASS
SPIRAL INTERNAL COIL, 40 SW FT, DP SHELL 8 PSIG, DP COIL 40 PSIG @
300F |
|
|
