Mixers |
  |
|
Featured
USED Equipment |
|
 |
RIBBON
BLENDER
23386
- UNUSED - AMERICAN PROCESS, RIBBON BLENDER, 55 CU FT, SS,
MANUFACTURED ON 2002, W/ 40 HP 230/460V 3PH, 1775 RPM, 95 AMPS, NEVER
INSTALLED-BUILT FOR A POWDERED DRINK BLENDING OPERATION.
|
|
 |
23572
SANITARY
DAY 40 CU FT. DOUBLE RIBBON BLENDER
|
|
 |
UNUSED
POLISHED 20 CU FT. DOUBLE CONE BLENDER
ITEM ID 24681- ONE UNUSED APPROX. 20 CU.FT. WORKING CAPACITY STAINLESS STEEL DOUBLE CONE TUMBLING BLENDER. THIS 54" WIDE BLENDER IS MOUNTED ON STAINLESS STEEL POLISHED STAND AND IS DRIVEN BY 7.5 HP 3/60/220 VOLT MOTOR. EQUIPPED WITH APPROX. 8" DIAMETER HAND OPERATED DISCHARGE VALVE, BLENDER HAS APPROX. 15" DIAMETER CHARGING PORT WITH LID. WITH HAND TILT DEVICE FOR MANUALLY ROTATING BLENDER. |
|
 |
EXCELLENT
CONDITION - USED 30 CU FT. SS TWIN SHELL BLENDER /
DRYER
ITEM ID 24682 - ONE USED GEMCO 30 CU.FT. STAINLESS STEEL TWIN SHELL "V" BLENDER/FORMULATOR. THIS FORMULATOR IS JACKETED AND RATED FULL VACUUM INTERNALLY, NATIONAL BOARD RATED, CODE STAMPED. RATED 50 LBS./CU.FT. MAXIMUM DENSITY. EQUIPPED WITH HIGH SPEED INTENSIFIER BAR (THAT COULD BE USED FOR LIQUID INJECTION), DRIVEN BY 7-1/2HP EXPLOSION PROOF DRIVE MOTOR. BLENDER IS DRIVEN BY REEVES 3HP VARIABLE SPEED EXPLOSION PROOF MOTOR. ADDITIONAL FEATURES INCLUDE 10" BUTTERFLY VALVE AND EXTENSION LEGS PROVIDING FOR APPROX. 48" UNDERCLEARANCE FROM DISCHARGE VALVE TO FLOOR. ALSO CAN BE EQUIPPED WITH KINNEY 10HP XP LIQUID RING VACUUM PUMP, HORIZONTAL RECEIVER TANK, AND ROLCO WAAGE ENERGY CONTROL SYSTEM. |
|
 |
SANITARY SS 10 CU FT.
TWIN SHELL BLENDER
24676- ONE USED PATTERSON KELLY STAINLESS STEEL SANITARY LIQUID/SOLIDS 10 CUBIC FOOT (WORKING CAPACITY) TWIN SHELL BLENDER .
ALL STAINLESS STEEL WETTED PARTS WITH POLISHED INTERNAL AND EXTERNAL FOOD GRADE FINISH RATED FOR MAXIMUM PRODUCT DENSITY OF 70 LBS PER CUBIC FOOT, APX. 1.5 HORSEPOWER DRIVE (TAG MISSING) COUPLED TO PARALLEL SHAFT BOSTON GEAR 20.03 TO 1 REDUCER WITH DINGS ELECTRIC MOTOR BRAKE (230/460/1 PHASE VOLTAGE) WITH FACTORY CHAIN AND SPROCKET DRIVE YIELDING 20 RPM SHELL SPEED APX. 2 HORSEPOWER LIQUID SOLIDS INTENSIFIER BAR DRIVE WITH STANDARD BELT AND PULLEY ARRANGEMENT, ALL DRIVES ARE TEFC 230/460/3 PHASE VOLTAGE, 8" DISCHARGE WITH MANUALLY OPERATED BUTTERFLY VALVE, 17.5" DIAMETER CHARGING PORTS WITH AIR RELIEF COVERS, MOUNTED IN PAINTED FACTORY STAND WITH 40" STAND EXTENSIONS.
FORMER APPLICATION COSMETICS. |
|
 |
SANITARY SS 30 CU FT.
TWIN SHELL BLENDER
24677- ONE USED PATTERSON KELLY STAINLESS STEEL SANITARY LIQUID SOLIDS 30 CU/FT (WORKING CAPACITY) TWIN SHELL BLENDER.
ALL STAINLESS STEEL SHELL AND WETTED PARTS WITH POLISHED INTERNAL AND EXTERNAL
FOOD GRADE FINISH, RATED FOR MAXIMUM PRODUCT DENSITY OF 55 LBS/CUBIC FOOT, THREE HORSEPOWER SHELL DRIVE BY DRESSER ELECTRIC MOTORS WITH IN LINE 17.1 HELICAL GEAR REDUCER WITH FACTORY BULL AND SPUR DRIVE AND DINGS ELECTRIC MOTOR BRAKE (230/460/1 PHASE VOLTAGE), 7.5 HORSEPOWER 1755 RPM LIQUID SOLID DISPERSION BAR DRIVE BY GENERAL ELECTRIC WITH FACTORY BELT AND PULLEY ARRANGEMENT, ALL DRIVES ARE UNDERWRITERS LABORATORY RATED FOR HAZARDOUS LOCATIONS UNDER CLASS I GROUP D AND CLASS II GROUPS F & G, MOTOR BRAKE IS RATED FOR GROUPS I AND II, CLASSES C, D,E, F AND G, INCLUDES ALLEN BRADLEY SWITCH GEAR FOR ALL DRIVES RATED FOR CLASS I, GROUPS C-D, AND CLASS II, GROUPS EFG SERVICES, 10" DIAMETER DISCHARGE WITH MANUALLY OPERATED BUTTERFLY VALVE 18" DIAMETER CHARGING PORTS, WITH AIR RELIEF COVERS, MOUNTED IN PAINTED STEEL FACTORY STAND EXTENSIONS FOR DRUM HEIGHT DISCHARGE.
FORMER APPLICATION COSMETICS. |
|
|
