|
Item
ID |
Capacity |
Description |
|
23582 |
8 |
ONE
USED FARREL OO BANBURY MIXER HAVING APPROXIMATELY 8 LB. CAPACITY WITH
STEAM HEATED BODY, AIR OPERATED RAM WITH 24" STROKE AND FLOATING
WEIGHT, TRABON LUBRICATION SYSTEM, SLEEVE TYPE BEARINGS AND SWING AWAY
BODY WITH 10 HP AC 600 RPM SINGLE SPEED MOTOR. |
|
23583 |
8 |
ONE
(1) USED BOLLING MODEL OM LABORATORY INTENSIVE MIXER HAVING A CHAMBER
VOLUME OF 100 CUBIC INCHES WITH A CAPACITY OF 4.6 LITERS OF APPROXIMATELY
0 LBS. ROTORS ARE DRIVEN BY A 40 HP G.E. D.C. MOTOR WITH BURTON SCR
CONTROL. MAXIMUM SPEED OF FAST ROTOR IS 125 RPM, WHILE THE MAXIMUM ROTOR
SPEED OF THE SLOW ROTOR IS 103.3 RPM GIVING A 1.21:1 FRICTION RATIO.
ALUMINUM BRONZE FACE TYPE DUST STOPS WITH MCCORD 4-POINT LUBE SYSTEM.
HYDRAULIC ACTUATED FLOATING WEIGHT (RAM) AND DOORS. MFD. 1973 |
|
23584 |
8 |
ONE
(1) USED BOLLING MODEL OM LABORATORY INTENSIVE MIXER HAVING A CHAMBER
VOLUME OF 100 CUBIC INCHES WITH A CAPACITY OF 4.6 LITERS OF APPROXIMATELY
8 LBS. ROTORS ARE DRIVEN BY A 40 HP RELIANCE D.C. MOTOR WITH SCR CONTROL.
HYDRAULIC ACTUATED FLOATING WEIGHT (RAM) AND DOORS. MFD. APPROXIMATELY
1973. |
|
23585 |
8 |
USED
NERPCO LABORATORY BANBURY MIXER WITH APPROX. 8 LB BATCH SIZE. HAS SWING
SIDE BODY WITH KNEE SAFETIES, AIR ACTUATED FLOATING RAM, ROLLER BEARING
ROTORS WHICH ARE CORED FOR COOLING BUT DO NOT INCLUDE ROTARY UNIONS. MIXER
MODEL #NM100, DRAWING #NM-10100. BANBURY IS SEMI-UNIDRIVEN BY 40 HP
HYDRAULIC PUMPING SYSTEM TO HYDRAULIC MOTOR. INCLUDES HYDRAULIC PRESSURE
CONTROL AND LUBRICATING PRESSURE CONTROL. INCLUDES LUBRICATING SYSTEM. |
|
23586 |
27 |
USED
FARREL TYPE MODEL 1D BANBURY MIXER HAVING APPROXIMATELY A 27 LB. BATCH
CAPACITY.ROTORS ARE DRIVEN BY A 50/100 HP TWO SPEED MOTOR THRU A LINK BELT
GEARBOX. AIR ACTUATED DISCHARGE. FEED HOPPER WITH FLOATING WEIGHT. |
|
23587 |
27 |
USED
FARREL MODEL 1 FARREL BANBURY INTENSIVE MIXER HAVING A 27 POUND BATCH
CAPACITY. SERIAL #9537. MIXER IS DRIVEN BY A 100/50 HP AC MOTOR (1160/580
RPM) THROUGH A HORSBURG & SCOTT GEAR REDUCER WITH A 9.0 REDUCTION
RATIO. AIR ACTUATED DISCHARGE. FLOATING WEIGHT WITH AIR CYLINDER ON FEED
THROAT. TRABON LUBRICATION SYSTEM. UNITIZED ON A BASE. REBUILT 1992. WITH
CONTROLS. |
|
23588 |
390 |
USED
BANBURY ROTORS. REPORTED SUITABLE FOR #11 BANBURY MIXER WITH ROLLER
BEARINGS SKINNER BODY. ALSO INCLUDES 4 COLLARS. OVERALL LENGTH OF ROTORS
84" ON SHORT ROTOR, 131 1/2" ON LONG ROTOR. |
|
23573 |
|
USED
BRABENDER MIX HEAD MODEL CEE-6-230V-8.5 AMP. SERIAL #AA636SB. ELECTRICALLY
HEATED 230 VOLT 8.5 AMPS. |
|
23574 |
|
USED
HAAKE RHEOMIX HAVING AN ELECTRICALLY HEATED MIXING CHAMBER. MIXER IS
DRIVEN BY A 3 HP DC MOTOR WITH SCR CONTROL. TEMPERATURE CONTROL IS VIA A
3-ZONE PANEL MOUNTED ON THE SAME BASE. |
|
23575 |
|
USED
TESTING UNIT, SERIAL #60010. HAS OIL HEATED MIX HEAD DRIVEN BY 3 HP MOTOR.
OIL HEATED CHAMBER BUT NO OIL HEATER IN UNIT INCLUDED. |
|
23576 |
|
USED
BRABENDER ROLLER STYLE BATCH MIXER HEAD. S/N G124/61. STAINLESS STEEL
CONTACTS JACKETED BODY BUT NO DRIVE |
|
23577 |
|
USED
BRABENDER PLASTICORDER INCLUDING HOT OIL HEATER, DRIVE WITH 0.6 HP,
BANBURY TYPE HEAD, AND CONTROLS. |
|
23578 |
|
USED
STRUTTER WELLS BANBURY STYLE MIXER. |
|
23579 |
|
USED
.75" 25/1 EXTRUDER WITH BASE FOR BRABENDER. 3 ZONE BARREL. |
