Continuous Mixers FCM type |
  |
|
Item ID |
Capacity |
Description |
|
23590 |
2 |
USED 2" BAKER PERKINS KOKNEADER. HAS JACKETED
BARREL. HAS STRIP DIE DISCHARGE, WITH MAIN DRIVE A 25 HP U.S. VARI-DRIVE,
230-460 VOLT. NEW 1973. PREVIOUSLY USED ON POLYETHYLENE COLOR CONCENTRATE AT
A REPORTED RATE OF 60# PER HR. |
|
23591 |
4 |
USED FARREL MODEL 4FCM CONTINUOUS MIXER, SERIAL
# 68A946. MIXER IS DIRECT CONNECTED TO 100 HP MILLENNIUM, POWER TEC
BRUSHLESS DC MOTOR WITH MILLENNIUM 460 VOLT SCR CONTROL. MOTOR IS DIRECT
CONNECTED TO FARREL GEARBOX WITH 3.537/1 REDUCTION, RATED AT 150 HP CATALOG
RATING AT 1750 RPM INPUT. SO# 66SC68. HAS #15 STYLE TAPERED ROTORS,
HYDRAULICALLY ACTUATED ORIFICE, FY STYLE DUST SEALS. MANUALLY ACTIVATED
CHAMBER REMOVAL, ROTARY UNIONS TO SPLIT STYLE CHAMBER, STEAM HEATED. MIXER
CURRENTLY MOUNTED ON FABRICATED STEEL BASE. INCLUDES HYDRAULIC PUMPING
SYSTEM. PREVIOUSLY USED ON 80-85% STYRENE/ACRYLIC RESIN, 10% CARBON BLACK,
5% CHARGING AGENT. MOTOR AND SCR ADDED 1995. |
|
23592 |
4 |
USED STERLING MODEL E4 TRANSFER MIX FOR
VARIABLE INTENSITY COMPOUNDING. REPORTED CAPACITY OUTPUT 600-2,000#/HR.
SUITABLE FOR UP TO 300 HP, WAS LAST USED WITH 300 HP DC DRIVE THAT IS NOT
AVAILABLE. HAS STUFFER RAM ON FEED THROAT. ELECTRICALLY HEATED WATER COOLED
VENTED BARREL. MACHINE SERIAL #TE4-0010. SIZE E4-M. 3.5:1 GEARBOX RATIO WITH
500 RPM SCREW SPEED. HAS TEMPERATURE CONTROL PANEL WITH 4 WEST INSTRUMENTS. |
|
23593 |
4 |
USED FARREL CP45 CONTINUOUS MIXER/EXTRUDER
PACKAGE. MIXING SYSTEM CONSISTS OF 4" FARREL CONTINUOUS MIXER WITH #15 STYLE
ROTORS INSTALLED. HAS ELECTRICALLY HEATED WATER COOLED CHAMBER, DRIVEN BY
100 HP DC MOTOR WITH CONTROL TECHNICS SCR DRIVE. HAS ADJUSTABLE ORIFICE
GATE, TEMPERATURE CONTROL PANEL AND ACRISON VOLUMETRIC FEEDER. CONTINUOUS
MIXER IS MOUNTED IN WORK UNITIZED FRAME WITH 5" FARREL EXTRUDER,
ELECTRICALLY HEATED WATER COOLED BARREL WITH RAM FEED ASSIST AND MOCON
CLOSED LOOP COOLING SYSTEM FOR MIXER/EXTRUDER COOLING. EXTRUDER EQUIPPED
WITH VENTED BARREL, SYSTEM INCLUDES HYDRAULIC LUBRICATION PACKAGE. EXTRUDER
DRIVEN BY 60 HP DC MOTOR WITH CONTROL TECHNICS DRIVE. SERIAL NUMBER 906161,
NEW 5/91. EXTRUDER EQUIPPED WITH STRAND DIE. INCLUDES SPARE SCREW FOR
EXTRUDER AND SPARE SET OF #15 ROTORS WITH BEARING/GEARS FOR CONTINUOUS
MIXER. |
|
23594 |
4 |
USED W&P MODEL C-120, 4.72" O.D. TWIN SCREW,
CO-ROTATING TWIN SCREW EXTRUDER/CONTINUOUS MIXER. SERIANL NUMBER 180396.
24/1 L/D, ELECTRICALLY HEATED WATER COOLED BARREL, DRIVEN BY 400 HP DC
MOTOR. INCLUDES SCR CONTROL AND FREE STANDING TEMPERATURE CONTROL PANEL. |
|
23595 |
5 |
USED READCO TWIN SCREW MIXER. 5" DIAMETER X 40"
LONG. MATERIAL OF CONSTRUCTION HASTELLOY C-4C. PRESSURE RATING 150 PSIG AT
400 DEG. F. FLOW RATING 20-40 PPH. 20 HP, 3 PHASE, 60 CYCLE, 480 VOLT.
1770RPM WITH 68 RPM OUTPUT. 1987. |
|
23596 |
9 |
USED FARREL MODEL 9FCM CONTINUOUS MIXER, #15
STYLE ROTORS, 1881 CUBIC INCH MIXING CHAMBER, RATED UP TO 10,000 LBS. PER
HOUR. 600 HP DC MOTOR THROUGH A FARREL GEAR BOX. CORED ROTORS WITH ROTARY
UNIONS, HYDRAULIC SYSTEM, LUBE SYSTEM. |
|
23597 |
9 |
USED FARREL MODEL 9FCM CONTINUOUS MIXER. #15
STYLE ROTORS, 1881 CUBIC INCHES MIXING CHAMBER. RATED UP TO 10,000 LBS. PER
HOUR. 600 HP AC MOTOR. CORED ROTORS WITH ROTARY UNIONS. ON BASE. SERIAL NO.
66A2924. |
|
23598 |
12 |
USED 8 LITER DRAISWERK GELIMAT MODEL 80 HIGH
SPEED BATCH TYPE MIXER. DRIVEN BY APPROXIMATELY 250 HP AC MOTOR WITH
SAFTRONIC SOFT STARTER. MIXER HAS JACKETED CHAMBER, HARDENED SURFACES TO
ROTOR AND INTERIOR OF CHAMBER, 4-WING PADDLE STYLE ROTOR. HAS 12" X 18"
CENTER FEED HOPPER, AND DISCHARGES UTILIZING AIR CYLINDERS FOR BOTTOM DOOR
DUMP. MIXER DISCHARGES ON TO 2-ROLL CALENDER 12" O.D. X 20" WIDE, NO MOTOR
INCLUDED WITH CALENDER. ROLLS ARE CORED FOR HEATING OR COOLING BUT NO ROTARY
UNIONS INCLUDED. |
|
23599 |
12 |
USED 12" DIA. READCO TWIN SCREW PROCESSOR.
MIXING CHAMBER WITH 12" DIA. OVERLAPPING SCREW SEGMENTS 96" LONG. WITH 3"
TRANSITION SECTION TO 10" DIA. 41" LONG METERING DISCHARGE SECTION. 3 ZONE
JACKETED BARREL FORMERLY DRIVEN BY 40 HP DC DRIVE THAT IS NOT AVAILABLE. NEW
1975 BUT REPORTED ONLY USED EXPERIMENTALLY FOR 200 HOURS OR LESS. REPORTED
DESIGNED FOR CONTINUOUS MIXING OF PASTE, DOUGHS, AND HIGH VISCOSITY PRODUCTS
WITH INGREDIENTS CONTINUOUSLY SUBJECT TO SHEAR, COMPRESSION, EXPANSION AND
KNEADING ACTIONS. S/N 104762. ORDER NO S-22745. SCREW ARE CARBON STEEL W/
THE DISCH. SECT HARDEND. |
|
|
