Mixers - Littleford type |
  |
|
Item
ID |
Capacity |
Material |
Description |
|
23687 |
5 |
|
UNUSED
5 HP CHOPPER MOTOR (REQUIRES CHOPPER) 3 PHASE, 60 CYCLE, 230/460 VOLT 3460
RPM. ALSO AVAILABLE CONTROL CABINET AND STARTERS |
|
23688 |
10 |
SS |
USED
JWI MODELC-100 PLOW MIXER HAVING APPROXIMATELY A 10 LITER CAPACITY.
STAINLESS STEEL CONSTRUCTION. DIRECT DRIVEN BY A 2 HP EXPLOSION PROOF
MOTOR. EXTREMELY CLEAN. |
|
23327 |
21 |
316
SS |
Used
Littleford model DVT-600-D polyphase processor. T316 stainless steel contact parts. 600 Liter capacity.
160 gallon. Approx. 21 cu ft. Rated
for 40 PSI, vacuum internally at 32 degrees F minimum to 260 degrees F
maximum. Jacket rated 70 psi
at 32 to 320 degrees F. Has a 20" top access port. Drive. Filter extraction and controls. Bottom valve.
Built 1994. National board stamped. |
|
23325 |
43 |
SS |
NEW
and UNUSED LITTLEFORD MIXER, Model 2000E, sanitary stainless steel
construction, 43 cu. ft. working capacity, stainless steel jacket rated
144 PSI, 100 HP main drive, (3) 10 HP choppers. Mixer still in orig.
crate, avail. for immediate shipment |
|
23324 |
71 |
304L
SS |
ONE
(1) Used FKM-2000E Littleford Mixer, 304L stainless steel construction, 71
cu. ft. total capacity, 49.7 cu. ft. working capacity, standard feed
ports, 10" center bottom outlet with pneumatically operated valve,
three (3) 10 H.P. high speed choppers, 40/20 H.P. main drive with Falk
Gear Box, 230/460 volt, 3 phase. |
|
23323 |
73 |
SS |
ONE
(1) Used FKM2000E Littleford Mixer, stainless steel construction, 73 cu.
ft. total capacity, 43 cu. ft. working capacity, (3) 10 H.P. explosion
proof choppers, 40 H.P. explosion proof main drive, 575 volt, air purge
seals, standard access doors, (2) 8", (1) 18" x 18" top
ports, manually operated flush type center discharge. |
|
23321 |
74 |
|
ONE
(1) Used FKM2000D Littleford-Lodige Plow Mixer, stainless steel
construction, 73.5 cu. ft. total capacity, 42.4 cu. ft. working capacity,
10", 16" top ports, standard access doors, dual 7" x
9" bottom outlets with pneumaticallyoperated flush type valves,
provisions for two choppers, 40 H.P. drive with Falk Reducer, approx. 128
RPM shaft speed. |
|
23322 |
74 |
SS |
ONE
(1) Used FKM2000D Littleford Mixer, stainless steel construction, 73.5 cu.
ft. total capacity, 42.4 cu. ft. working capacity, sanitary design with 6
welded plows, jacketed for 75 PSI, machine driven by 60 H.P. motor
throughFalk Gear Reducer, 460 volt, six (6) 10 H.P. high speed choppers,
230/460 volt, air purge seals, manually operated flush type discharge. |
|
23689 |
99 |
SS |
USED
J.H. DAY SIZE 4 STAINLESS STEEL TURBULENT MIXER. 3.5 CU.FT. TOTAL
CAPACITY. 20" DIA. X 22" LONG, 1/4" THICK SHELL, RATED FULL
VACUUM AT 20 DEG. F. STEEL JACKET ON SHELL RATED 75 PSI AT 20 DEG. F. 7.5
HP 575 VOLT VARISPEED DRIVE. INCLUDES CHOPPERS WITH 10 HP DRIVE. 18"
X 10" MANWAY WITH 6" DIA. CONNECTION. 8" DIA. CENTER BOTTOM
DISCHARGE PORT. MOUNTED ON STAND, APPROX. 2 1/2' DISCHARGE HEIGHT. MFG. |
|
23690 |
130 |
|
USED
LITTLEFORD MODEL FM-130-D INTENSIVE MIXER HAVING A TOTAL VESSEL VOLUME OF
4.6 CUBIC FEET AND A WORKING CAPACITY OF 3.0 CUBIC FEET. STAINLESS STEEL
CONTACT PARTS. JACKETED CHAMBER RATED AT 75 PSI AT 320 DEGREES F. NATIONAL
BOARD #10351. CHAMBER HAS A SINGLE 10 HP CHOPPER. MIXER IS BELT DRIVEN BY
A 5 HP MOTOR THROUGH A GEAR BOX. MOUNTED ON LEGS. MANUFACTURED 1971. |
|
23691 |
130 |
SS |
USED
MORTON MODEL BP130 STAINLESS STEEL PLOUGHSHARE MIXER. 130 LITRE TOTAL
CAPACITY. APPROXIMATELY 50-90 LITRE WORKING CAPACITY. BELT DRIVEN BY 2.2
KW 415 VOLT 3/50 1420 RPM MOTOR THROUGH GEARBOX. HAS (1) STAINLESS STEEL
CHOPPER DIRECT DRIVEN BY 4KW 415 VOLT 3/50 2880 RPM MOTOR. INCLUDES
STOP/START CONTROLS. MOUNTED ON CARBON STEEL STAND. |
|
23287 |
275 |
304SS |
High
Intensity Ploughshare Mixer
275 ft3 working capacity, 400 hp (1.15 sf) main shaft, 6 20 hp choppers,
continuously welded cooling jacket, 304 SS wetted surfaces. Batch size
7000 lbs,Maximum 20 batches per day
Ancillary Equipment: McQuay reciprocating chiller, an array of day bins,
feeders, etc. |
|
23675 |
1200 |
SS |
USED 1200 LITER LITTLEFORD COOLING MIXER. HAS STAINLESS STEEL JACKETED BOWL, BELT DRIVEN BY 30 HP 460 VOLT MOTOR. RATED 45 PSI @ 292 DEG. INCLUDES CENTER BOTTOM OUTLET, 3-CLEAN OUT DOORS, INCLUDES FIVE NEW BLADES. |
|
23692 |
1600 |
CS |
USED
DRAIS MODEL T-1600 CARBON STEEL TURBULENT MIXER. 1600 LITRE (56.5 CUFT)
WORKING CAPACITY. INTERNAL APPROXIMATELY 1100 MM DIAMETER X 1800 MM LONG.
T BLADES BELT DRIVEN BY 22 KW 220/380 VOLT 3/50 MOTOR THROUGH FLENDER
MODEL SZO 140 GEARBOX RATED 1038/101 RPM REDUCTION RATIO. RATED 5 BAR
PNEUMATIC PRESSURE. INCLUDES CONTROL PANEL. NEW 1985. |
|
23693 |
2000 |
SS |
USED
LITTLEFORD MIXER MODEL FKM-2000E. POLISHED STAINLESS STEEL CONTACT PARTS.
JACKET RATED 75 PSI @ 320°F. CURRENTLY NO CHOPPERS, WILL ACCEPT UP TO
THREE, WITH NO MAIN MOTOR. THESE CAN BE ADDED FOR EXTRA CHARGE, CALL FOR
PRICING. |
|
23694 |
2500 |
CS |
USED
DRAIS MODEL HT-2500 CARBON STEEL TURBULENT MIXER. 2500 LITRE (88 CUFT)
WORKING CAPACITY. INTERNAL APPROXIMATELY 1450 MM DIAMETER X 1600 MM LONG
RATED FULL VACUUM. CARBON STEEL JACKET 132 LITRE CAPACITY RATED 3 BAR
PRESSURE AT 150 DEGC. T BLADES DIRECT DRIVEN BY 58 KW 380 VOLT 3/50 1485
RPM MOTOR THROUGH FLENDER MODEL SZW 505 GEARBOX RATED 725/65 RPM REDUCTION
RATIO. |
|
23695 |
4200 |
304
SS |
USED
LITTLEFORD MODEL KM4200 148 CUBIC FOOT. TOTAL CAPACITY CONTINUOUS MIXER.
APPROXIMATELY 75 CUBIC FOOT WORKING CAPACITY. T304 STAINLESS STEEL PRODUCT
CONTACTS. CARBON STEEL CONVENTIONAL JACKET ASME CONSTRUCTED 75 PSI @ 320°
F. DRIVEN THROUGH GEAR REDUCER BY 75 HP MOTOR. OUTBOARD BEARINGS & AIR
PURGED SHAFT SEALS. BUILT 1975. |
|
23696 |
8000 |
304
SS |
USED
LITTLEFORD 8000 LITER (282 CUBIC FOOT) MODEL FKM 8000D. TOTAL CAPACITY
T304 STAINLESS STEEL PLOW MIXER. 60" WIDE X 72" DEEP
"U" SHAPED TROUGH BODY, WITH (2) 60" X 43" CLAMP ON
TOP COVERS, ONE WITH A 20" FLANGE, CENTER OF TOP HAS A 24" X
24" FLANGED OPENING, SIDE OF SHELL HAS (2) 24" X 16" HINGED
COVERS. 75 HP DRIVE. 230/460 VOLT. BUILT 1986 |
|
21291 |
|
CS |
Drais
KTTP-175 Mixer, 15" dia x 58" long, (Similar to Tubulizer) S/S
Clam Shell Design Cylindrical Chamber, C/S Cored Shaft, Housing is
Jacketed, 9" wide x 14" Feed Opening, Multiple Liquid Injection
Ports, End Discharge, Require 22 KW Drive, 1986 |
|
|
