|
Item
ID |
Capacity |
Material |
Description |
|
23697 |
1 |
SS |
USED
NAUTA APPROXIMATELY 20 LITRE (1 CUFT) TOTAL CAPACITY STAINLESS STEEL
LABORATORY MIXER. REMOVEABLE MIXING CONE APPROXIMATELY 320 MM DIAMETER X
360 MM HIGH. HAS COPPER PIPE HEATING JACKET. SCREW AND ORBIT ARM BELT
DRIVEN BY APPROXIMATELY 1 KW MOTOR. MOUNTED IN STAND. |
|
23698 |
1 |
SS |
USED
DAY "MINI MIXER" NAUTA MIXER. 1.75 CUBIC FOOT WORKING CAPACITY.
304SS. 27" DIAMETER X 36" CONE HEIGHT. BRISCO HEATING JACKET,
ELECTRIC 3.75 WATTS WITH FIBERGLASS INSULATION AND OUTER STAINLESS STEEL
SHEATHING. 6.50" DIAMETER STAINLESS STEEL SCREW, 1.5 HP VARIABLE
PULLEY DRIVE 3/60/230-460V/1200 RPM (TEFC). 6" BOTTOM OUTLET WITH
HAND OPERATED CONTROL. THREE PIPE LEG MOUNTING, 38.5" DISCHARGE
HEIGHT. 1972 VINTAGE. |
|
23699 |
3 |
SS |
ONE
USED JH DAY NAUTA MIXER MODEL FA3.5 HAVING A 3.3 CUBIC FOOT WORKING
CAPACITY OR 24.6 GALLON. MANUFACTURED OF STAINLESS STEEL. AUGER IS DRIVEN
BY A 3 HP MOTOR THROUGH A GEAR REDUCER GIVIVING A FINAL RPM OF93. UNIT HAS
7.5 HP SIDE CHOPPER/LUMP BREAKER. MOUNTED ON LEGS ALLOWING FOR 50"
CLEARANCE UNDER DISCHARGE. ELECTRICALLY HEATED. WITH CONTROLS. RATED FOR
VACUUM. MANUFACTURED 1990. |
|
23700 |
10 |
SS |
USED
J.H. DAY MODEL FA10 STAINLESS STEEL NAUTA MIXER. 10 CU.FT. CAP- ACITY,
TYPE 304 STAINLESS STEEL, S/N 1489. 8" DEZURIK STAINLESS STEEL SLIDE
GATE DISCHARGE VALVE, 8" DIA. BUTTERFLY FEED VALVE, BOTH ARE
PNEUMATICALLY CONTROLLED. 3 HP SCREW DRIVE, 3/4 HP ORBITAL ARM DRIVE.
POLISHED INTERNAL. SHORT LEG SUPPORTS. NEW 1986. |
|
23701 |
27 |
SS |
USED
APPROX. 27 CU.FT. WORKING CAPACITY STAINLESS STEEL DAY NAUTA MIXER.
66" DIA. AT TOP X 80" HIGH. POLISHED INTERNAL. 1.5 HP 230/460
VOLT, AND 5 HP 190/380 VOLT DRIVES. SERIAL #1716. LAST IN PHARMACEUTICAL
SERVICE. |
|
23702 |
35 |
CS |
USED
J.H. DAY NAUTA MIXER MODEL MB350. SERIAL #88730. 35 CUBIC FOOT MIXER
WORKING CAPACITY. UNIT IS CARBON STEEL CONTACT PARTS. SET UP WITH PIPE
LEGS. UNIT MESURES 94" HIGH X 72" DIAMETER. UNIT HAS GEAR BOX
BUT NO MOTOR ON IT. CARBON STEEL APPEARS TO BE IN GOOD CONDITION. TOP HEAD
IS HINGED ON ONE SIDE. GENERAL OVERALL CONDITION IS GOOD. |
|
23703 |
35 |
SS |
USED
KRAUSS MAFFEI MODEL TMT 1/200 316TI STAINLESS STEEL TITUS CONICAL BLENDER
DRYER. 1000 LITRE WORKING CAPACITY, 1250 LITRE TOTAL CAPACITY. INTERNAL
RATED FULL VACUUM/3 BAR PRESSURE AT 160 DEGC. 304 STAINLESS STEEL JACKET
223 LITRE CAPACITY 5.9 SQMT HEAT TRANSFER AREA RATED 6 BAR PRESSURE AT 160
DEGC. 200 MM DIAMETER CORED SCREW 12 LITRE CAPACITY BOTTOM DRIVEN BY 7.5
KW 380 VOLT 3/50 2960 RPM MOTOR WITH CARRIAGE DRIVEN BY 0.37/1.5 KW 380
VOLT 3/50 750/3000 RPM POLE CHANGE MOTOR. INCLUDES WIEGAND & WISSER
1.75 SQMT JACKETED FINE DUST FILTER. 300 LITRE INTERNAL CAPACITY RATED
FULL VACUUM AT 160 DEGC. 27 LITRE JACKET RATED 6 BAR PRESSURE AT 160 DEGC. |
|
23704 |
35 |
|
USED
APPROX. 35 CU. FT. STEEL NAUTA BLENDER. S/N 85758. MODEL MB, 5 HP DRIVE
3/60/230/460. PNEUMATIC OPERATED GATE VALVE DISCHARGE. |
|
23705 |
35 |
SS |
USED
NAUTA MODEL MBX350 (J. H. DAY) 35 CU. FT. STAINLESS STEEL MIXER. HAS 10 HP
3/60/550 TEFC BELT DRIVE ON SCREW. 1 - 1/2 HP 3/60/220/ 440 TEFC GEARHEAD
ROLLER CHAIN DRIVE ON ORBITAL ARM. SIDE BOTTOM OUTLET VALVE. TRANSLATION:
UZYWANY MIESZALNIK KWASOODPORNY, TYPU NAUTA, PRODUKCJI AMERYKANSKIEJ O
POJEMNOSCI 1000 LITROW, POSIADA DWA SILNIKI (10 KW, 2,6 KW). SPUST DOLNY.
GABARYTY: SREDNICA 2000 MM, WYSOKOSC 3300 MM, STAN BARDZO DOBRY. |
|
23706 |
41 |
SS |
USED
APPROXIMATELY 41 CUBIC FOOT TYPE 304 STAINLESS STEEL NAUTA MIXER.
APPROXIMATELY 5' DIAMETER AT TOP, 6'4" DEEP CONE BOTTOM. SINGLE GEAR
BOX DRIVES SCREW & ORBITAL ARM, 5 HP 1160 RPM MOTOR, BRIDGE MOUNTED,
BOTTOM STEADY BEARING. SIDE BOTTOM DISCHARGE OUTLET. (3) PIPE LEG
SUPPORTS. BUILT BY JH DAY COMPANY. |
|
23707 |
52 |
SS |
USED
JH DAY MODEL MBX525 STAINLESS STEEL NAUTA MIXER. APPROXIMATELY 52.5 CUBIC
FOOT WORKING CAPACITY. 10 HP MAIN DRIVE. 2 HP ON SCREW. MOTORS ARE
EXPLOSION PROOF. |
|
23708 |
71 |
SS |
USED
NAUTAMIX TYPE MBC20R 2000 LITRE CAPACITY STAINLESS STEEL COMBIMIXER. (2)
CONES 1819 MM DIAMETER X 2345 MM HIGH. (2) MIXING SCREWS DRIVEN BY 5.5 KW
MOTORS WITH ORBIT ARM DRIVEN BY 1KW MOTORS. MOUNTED IN A MILD STEEL FRAME. |
|
23709 |
75 |
SS |
USED
75 CU.FT. TOWER IRON WORKS CONICAL SHELL/ROTATING SCREW POWDER BLENDER.
ASME CONSTRUCTED T304 STAINLESS STEEL SHELL, 6' DIA. X 1' X 8' DEEP CONE
BOTTOM, RATED 50 PSI/29" VAC @ 250 DEG. F.. WELDED DISHED TOP. HAS
ATMOSPHERIC MILD STEEL JACKET ON 6' OF CONE BOTTOM. 2 HP VARISPEED DRIVE
FOR ORBITAL ARM, MOUNTED ON TOP. 15 HP BELT DRIVE FOR SCREW ROTATION,
MOUNTED AT BOTTOM OF SCREW. LUG SUPPORTS AND 9 1/2' HIGH I-BEAM LEGS.
BUILT 1973. |
|
23352 |
92 |
SS |
Two
(2) Used Nautal Mixer,
Stainless Steel, approx. 92 cu. Ft. capacityr. 6' 6" Diameter x 8'
4" H. Available with all
structural Steel. |
|
23710 |
98 |
CS |
USED
APPROXIMATELY 98 CUBIC FOOT JH DAY CARBON STEEL NAUTA MIXER. MODEL MBX
980, 15 HP & 2 1/2 HP DRIVES. |
|
23288 |
127 |
304
SS |
(2) Conical Screw Blenders (Chemical Duty Design)
127 ft3 working capacity, 25 hp screw, 3 hp orbital arm, one piece 7 ga. 304 SS construction, (2) in this lot |
|
23711 |
131 |
316
SS |
One
(1) used Day Nauta mixer. 131 cu.ft. working capacity. T-316 stainless
steel construction. T-304 stainless steel dimple jacket. Rated 125 PSI @
353 deg. F. Model FB-131. 20 HP 3/60/575 volt 64 RPM motor for screw. 3 HP
3/60/575 volt motor for the orbital arm. 20 HP 3/60/575 volt motor giving
1800 RPM's for the lumpbreaker. 99-1/2" Diameter X 137" cone
height. 15" Diameter free hanging internal screw. Flat top (2) piece
hinged cover. Several connections. Three (3) lug mounting pads. Pneumatic
6" Diameter Dezurik knife gate discharge. Lumpbreaker has mechanical
seal with lubrication system. Main drive is heavy duty design B-1 type. |
|
23712 |
141 |
321
SS |
USED
VRIECO-NAUTA TYPE S40RB-S 321 STAINLESS STEEL CONICAL MIXER. 4000 LITRE
WORKING CAPACITY, 7550 LITRE TOTAL CAPACITY. MIXING CONE 2450 MM DIAMETER
X 3444 MM HIGH. WELDED DISHED TOP HEAD. INTERNAL RATED 0.3 BAR PRESSURE AT
100 DEGC. 200 LITRE CAPACITY 321 STAINLESS STEEL JACKET ON 1600 MM OF
STRAIGHT SIDE RATED 0.3 BAR PRESSURE AT 100 DEGC. MIXING SCREW TOP DRIVEN
BY 10 KW 380 VOLT 3/50 1450 RPM MOTOR. STAINLESS STEEL ORBIT ARM TOP
DRIVEN BY 1.1 KW 220/380 VOLT 3/50 1420 RPM MOTOR. PNEUMATICALLY OPERATED
DISCHARGE VALVE. ALSO INCLUDES TOP MOUNTED TYPE AJK 204 STAINLESS STEEL
DUST COLLECTOR RATED 7 CUM/HR AT 6 BAR PRESSURE. MOUNTED IN SUPPORT RING. |
|
23713 |
530 |
321
SS |
USED
VRIECO NAUTA MODEL S150KV-1 15000 LITRE (530 CUFT) WORKING CAPACITY (28700
LITRE TOTAL CAPACITY) T321 STAINLESS STEEL MIXER. APPROXIMATELY 3926MM
DIAMETER X 5919MM HIGH (4) SECTION BOLTED CONE. 355MM DIAMETER SCREW
DRIVEN BY TOP MOUNTED 18.5KW MOTOR AND 1.5KW ORBIT DRIVE. |
