|
Item ID |
Capacity |
Material |
Description |
|
23342 |
1 |
SS |
One used JH Day Ribbon Mixer, SS, 1.44 Cu. Ft.
Capacity |
|
23715 |
1 |
SS |
USED .75 CUBIC FOOT WORKING CAPACITY NISSUI
STAINLESS STEEL NON-JACKETED SINGLE RIBBON BLENDER. PREVIOUSLY USED AS
BLENDING HOPPER IN APPLICATION OF WAX TO PLASTIC PELLETS. INCLUDES .75
KW,200 VOLT GEARHEAD MOTOR, COVER, AND BLOWER FOR DISCHARGE. |
|
23714 |
2 |
SS |
USED 1.5 CUBIC FOOT NISSUI STAINLESS STEEL
NON-JACKETED SINGLE RIBBON BLENDER. PREVIOUSLY USED AS BLENDING HOPPER IN
APPLICATION OF WAX TO PLASTIC PELLETS. INCLUDES MOTOR, COVER. |
|
23716 |
4 |
SS |
ONE USED APPROXIMATELY 4 CUBIC FOOT STAINLESS
STEEL PADDLE MIXER MANUFACTURE BY MARION. TROUGH MEASURES 54" LONG X 12"
WIDE X 17" DEEP. STAINLESS STEEL CONSTRUCTION END BOTTOM DISCHARGE, DIMPLE
JACKET RATED FOR 400 DEGREES F. @ 125 PSI. REPORTEDLY NEW PADDLES INSTALLED. |
|
23717 |
5 |
SS |
USED APPROXIMATELY 5 CUBIC FOOT STAINLESS STEEL
NON-JACKETED RIBBON BLENDER. HAS CENTER BOTTOM OUTLET, INCLUDES 5HP,
3/60/230 460 V MOTOR, HAS 18" X 36" OVERALL TROUGH SIZE AND INCLUDES COVER. |
|
21090 |
10 |
SS |
Used S/S Double Ribbon Blender, 10cu.ft.
Working Capacity Jacket Rated @ 125 PSI, Driven by 3HP Motor on Legs with
Cover |
|
23459 |
10 |
304SS |
NEW MANUFACTURER (UNUSED) 10 CUBIC FOOT WORKING
CAPACITY DOUBLE RIBBON MIXER, POLISHED 304
SANITARY STAINLESS CONTACTS, 43" L X 22" W X 26" D BLENDING CHAMBER WITH
2-1/2" SOLID S/ST MAIN SHAFT - APPROX. 60 RPM, THE OUTER RIBBON IS 1-1/2" X 1/4" AND
INNER RIBBON IS 1-1/2" X 1/4". MIXER HAS A 4" DIAMETER CENTER BOTTOM
DISCHARGE AND A KNIFE STYLE PNEUMATIC SLIDE GATE. SPLIT SEALS FOR EASY
CLEANING, BACK RESTS ON LID, SAFETY SWITCHES, SAFETY GRATES, MIRROR FINISH.
PAINTED FRAME/LEGS. 5 HP MOTOR. |
|
23464 |
10 |
SS |
1-USED
MARION MODEL SPY2436 STAINLESS STEEL PLOW/PADDLE MIXER, SERIAL NUMBER 90078.
WITH 10 CU.FT. WORKING CAPACITY, INTERIOR DIMENSIONS 24" WIDE X 36" LONG.
WITH SANITARY MIXING PLOWS, UNIT DRIVEN BY EURODRIVE 5 HP 3/60/208/360 VOLT
VARIABLE SPEED MOTOR. FEATURES HIGH SPEED CHOPPPER BLADE FOR BREAKING UP
AGGLOMERATIONS, DRIVEN BY 7 1/2 HP 3/60/230-460 VOLT MOTOR. ON LEGS, BLENDER
HAS BOTTOM DISCHARGE WITH AIR OPERATED SHROUD/ENCLOSURE AS WELL AS TOP SS
LID/HOOD WITH HINGED COVER. |
|
23718 |
12 |
CS |
USED APPROXIMATELY 12 CUBIC FOOT HAYES STOLTZ
CARBON STEEL DOUBLE HELIX RIBBON BLENDER, NEW 1985. DRIVEN BY 5 HP 240/480
VOLT MOTOR, HAS FLANGED DISCHARGE WITH PNEUMATIC GATE, END BOTTOM LOCATION.
14"X14" INLET, OVERALL DIMENSIONS 60" LONG X 20" WIDE X 20" DEEP. RIBBON
BLENDER MODEL HR10984. OUTER RIBBON 1.25" X 3/8" THICK, INNER RIBBON 2" X
1/4" THICK. |
|
23719 |
14 |
ST |
USED APPROXIMATELY 14 CUBIC FOOT REDCO STEEL
JACKETED RIBBON BLENDER. HAS CENTER BOTTOM OUTLET, BULL GEAR AND PINION
DRIVE TO APPROXIMATELY 5 HP 1730 RPM MOTOR. |
|
23458 |
15 |
304 SS |
NEW MANUFACTURER (UNUSED) 15 CUBIC FOOT WORKING
CAPACITY DOUBLE RIBBON MIXER, POLISHED 304 SANITARY STAINLESS CONTACTS, 48"
L X 25" W X 29" D BLENDING CHAMBER WITH 2-1/2" SOLID S/ST MAIN SHAFT -
APPROX. 55 RPM, THE OUTER RIBBON IS 1-1/2" X 1/4" AND INNER RIBBON IS 1-1/2"
X 1/4". MIXER HAS A 5" DIAMETER CENTER BOTTOM DISCHARGE AND A KNIFE STYLE
PNEUMATIC SLIDE GATE. SPLIT SEALS FOR EASY CLEANING, BACK RESTS ON LID,
SAFETY SWITCHES, SAFETY GRATES, MIRROR FINISH. PAINTED FRAME/LEGS. 10 HP
MOTOR. |
|
23463 |
15 |
SS |
1-USED STOKES APPROXIMATELY 15 CU.FT. STAINLESS
STEEL MIXER, MODEL 900-21-18, SERIAL NUMBER T-8362. MIXING TROUGH DIMENSIONS
APPROXIMATELY 25" WIDE X 47" LONG X 30" DEEP. WITH LID, THIS MIXER IS DRIVEN
BY 5 HP 3/60/220-440 VOLT MOTOR. DESIGNED FOR TILT DISCHARGE. |
|
23337 |
18 |
SS |
One used SS Ribbon Blender. Approx. 18 cu. Ft.
CBO. |
|
23462 |
18 |
SS |
1-USED WHITLOCK 18 CU.FT. WORKING CAPACITY
STAINLESS STEEL DOUBLE RIBBON BLENDER,
TANK DIMENSIONS APPROXIMATELY 24" WIDE X 60" LONG X 29" DEEP.
DOUBLE RIBBON AGITATOR DRIVEN BY SHAFT MOUNTED STERLING 7 1/2 HP
3/60/230-460 VOLT TEFC GEAR MOTOR. ON LEGS, PROVIDING APPROXIMATELY 40"
UNDERCLEARANCE. BLENDER HAS BOTTOM DISCHARGE WITH APPROXIMATELY 8" DIAMETER
HAND OPERATED BUTTERFLY DISCHARGE VALVE. WITH STAINLESS STEEL HINGED LID. |
|
23721 |
20 |
ST |
USED 20 CUBIC FOOT YOUNG SIZE 20 STEEL
NON-JACKETED DOUBLE RIBBON BLENDER. CHAIN DRIVEN BY 5 HP 220/440 VOLT MOTOR.
HAS CENTER BOTTOM OUTLET WITH VALVE, 2 PIECE COVER. PREVIOUSLY USED ON
STYRENE/ACRYLIC RESIN AND CARBON BLACK. |
|
23722 |
20 |
316 SS |
USED APPROXIMATELY 20 CUBIC FEET. TYPE 316
STAINLESS STEEL STRONG SCOTT PADDLE BLENDER, EQUIPT WITH PACKING GLANDS.
APPROXIMATELY. 27" WIDE X 32" DEEP X 4' LONG. WITH APPROX. 10" X 8" BOTTOM
END DISCHARGE. 5HP CHAIN DRIVE. SERIAL #2733. YEAR 1978. NATIONAL BOARD
#386. UNIT MOUNTED ON STAINLESS STEEL STAND 41" HIGH FROM BOTTOM DISCHARGE. |
|
23723 |
22 |
|
USED APPROXIMATELY 22 CU.FT. READCO DOUBLE
RIBBON MIXER WITH 5HP DOUBLE REDUCTION DRIVE. JACKETED MIXING CHAMBER. |
|
23724 |
22 |
SS |
USED APPROXIMATELY 22 CUBIC FOOT WORKING
CAPACITY STAINLESS STEEL DOUBLE RIBBON BLENDER. APPROXIMATELY 30" WIDE X 50"
LONG X 37" DEEP. JACKET RATED 25 PSI @ 300°F. APPROXIMATELY 10/20 HP DRIVE.
NATIONAL BOARD #35. USDA APPROVED, POLISHED, SANITARY. BUILT BY CHARLESTON
MANUFACTURING. SERIAL #5457B. 2" END BOTTOM DISCHARGE. HAS COVER.MOTOR
CONNECTED TO GEAR BOX AND THEN DRIVEN THROUGH SPROCKETS AND CHAIN. |
|
23720 |
24 |
SS |
USED HOWE MODEL M-24C STAINLESS STEEL DOUBLE
RIBBON MIXER HAVING 24 CUBIC FOOT TOTAL CAPACITY AND A WORKING CAPACITY OF
APPROXIMATELY 16 CUBIC FEET. RIBBON IS DRIVEN BY A 7-1/2 HP MOTOR THROUGH A
GEAR REDUCER. RIBBON RPM IS 56. SERIAL NUMBER 115263. TROUGH MEASURES 6"
LONG X 2' WIDE X 26" DEEP. EXTREMELY CLEAN. CENTER BOTTOM OUTLET.
APPROXIMATELY 40" CLEARANCE FROM FLOOR TO THE BOTTOM OF THE DISCHARGE. |
|
23495 |
25 |
Hastelloy |
Used Jaygo model JRB-25 jacketed, vacuum rated
25 cubic foot working capacity Hastelloy C276 double ribbon mixer. Trough
24" wide X 29" deep X 84" long,3/16 thick, end plate 1/4 thick. Inner ribbon
1/4" X 2". Outer ribbon 3/8" X 1 1/4" on a 3" diameter solid shaft, # 4
polish finish on internal surfaces.Has a 6" diameter center bottom discharge
with Dezurik knife gate valve,T316 SS arranged for a 36" clearance.Mixer
cover hinged and gasketed. Jacket is 12 gauge T304 SS dimple rated for 125
psi, ASME code and National Board stamped.Insulated with fiberglass and
aluminum skin over insulation. Driven by 7.5 hp Snuggler package providing
final output speed of 40 rpm, motor 3/60/230-460/TEFC. Mounted on legs.
Built 1993 |
|
23725 |
25 |
ST |
USED APPROXIMATE 25 CUFT. JH DAY DOUBLE RIBBON
MIXER WITH 3HP GEARHEAD DRIVE,24" W X26" D x 55" L ON LEGS WITH 55"
CLEARANCE, 4" ROUND CENTER GATE VALVE DISCHARGE, JACKETED MIXING CHAMBER. |
|
22485 |
30 |
CS |
30 CU FT MARION PLOW MIXER
10 HP, 220/440 V, 3 phase, 1750 RPM motor.
Belt driven gear reduced.
Carbon steel construction.
Dimensions: 4 ft. long x 3 ft. wide x 3 1/2 ft. deep.
Overall height - 8 ft. overall length - 5 ft. 8 inches.
Total capacity: approximately 40 cu. ft. or 300 gallons. |
|
22486 |
30 |
SS |
30 CU FT JACKETED STAINLESS STEEL PLOW MIXER
Details: All wetted parts are stainless steel. Vessel is 6 ft. long x 2 1/2 ft. wide x 3 ft. deep.
15/7.5 hp. Drive. Unit has a 6" bottom center outlet. Teflon
packing glands |
|
23726 |
35 |
CS |
KELLY DUPLEX CARBON STEEL HORIZONTAL MIXER.
APPROX 35 CUFT WORKING CAPACITY. SIZE W-BD10. SERIAL #67129-2. EQUIPPED WITH
(1) 25 HP & (1) 10 HP. JACKETED FOR 40 PSI. 6" CENTER BOTTOM SLIDE GATE
DISCHARGE. APPROXIMATELY 42" WIDE X 58" DEEP X 50" LONG. BOLTED TOP. |
|
23727 |
35 |
SS |
USED 35 CUBIC FOOT MK PORTER STAINLESS STEEL,
JACKETED DOUBLE RIBBON MIXERS. HAS CENTER BOTTOM OUTLET WITH HERRINGBONE
BULL GEAR, FULL COVER, MIXER INTERNAL DIMENSIONS 36" WIDE X 60" LONG. CENTER
BOTTOM OUTLET EQUIPPED WITH DUMP VALVE AND SCREW AUGER. HAS 10 HP GEAR HEAD
MOTOR WITH HERRINGBONE GEAR. HAS APPROXIMATELY 48" O.D. X 6' TALL STEEL
LOADING HOPPER FOR PNEUMATIC CONVEYING AND MATERIAL. APPROXIMATELY 6" X 6"
SQUARE CENTER BOTTOM OUTLET. |
|
23728 |
35 |
SS |
USED 35 CUBIC FOOT MK PORTER STAINLESS STEEL,
JACKETED DOUBLE RIBBON MIXERS. HAS CENTER BOTTOM OUTLET WITH HERRINGBONE
BULL GEAR, FULL COVER, MIXER INTERNAL DIMENSIONS 36" WIDE X 60" LONG. CENTER
BOTTOM OUTLET EQUIPPED WITH DUMP VALVE AND SCREW AUGER. HAS 10 HP GEAR HEAD
MOTOR WITH HERRINGBONE GEAR. HAS APPROXIMATELY 48" O.D. X 6' TALL STEEL
LOADING HOPPER FOR PNEUMATIC CONVEYING AND MATERIAL |
|
23729 |
35 |
SS |
USED 35 CUBIC FOOT MK PORTER STAINLESS STEEL,
JACKETED DOUBLE RIBBON MIXERS. HAS CENTER BOTTOM OUTLET WITH HERRINGBONE
BULL GEAR, FULL COVER, MIXER INTERNAL DIMENSIONS 36" WIDE X 60" LONG. CENTER
BOTTOM OUTLET EQUIPPED WITH DUMP VALVE AND SCREW AUGER. HAS 10 HP GEAR HEAD
MOTOR WITH HERRINGBONE GEAR. HAS APPROXIMATELY 48" O.D. X 6' TALL STEEL
LOADING HOPPER FOR PNEUMATIC CONVEYING AND MATERIAL. |
|
22482 |
36 |
CS |
36 CU FT CARBON STEEL RIBBON BLENDER
Approximately 275 gallon working capacity ribbon blender with bottom dump
gate and air operated bottom end slide gate.
Vessel is 30 inches W x 35 inches D x 90 inches L.
Overall ht. on legs is 96 inches.
Overall length is 160 inches with drive and valves.
2 inch dia. shaft with exterior bearings.
15 HP 440 V, 3 phase, 1750 RPM motor with compound belt gear drive.
Discharge is an 8 inch x 8 inch bottom/end with a Speedaire air
operated slide gate. Includes
top lids. |
|
23338 |
36 |
CS |
One Used approx. 36 cu.ft. Ribbon Blender. CS.
Jacketed. CBO |
|
21078 |
40 |
SS |
40cu.ft. Working Capacity S/S Paddle Blender,
28" wide x 7'9" long x 26" to Top of Paddles, Knife-Type Paddles, Packing
Glands, Direct Connect to Reeves 10HP Varidrive Unitized on Base with C/S
Feed Chute |
|
22472 |
40 |
SS lined |
1-USED ROBINSON APPROX. 40 CU.FT. WORKING
CAPACITY RIBBON AND PADDLE BLENDER, SERIAL #1611. BLENDER HAS STAINLESS
STEEL LINED TANK MEASURING APPROX. 30" WIDE X 96" LONG.
DRIVEN BY 10HP 3/60/200 VOLT GEARMOTOR.
ON LEGS, PROVIDING FOR
APPROX. 30" UNDERCLEARANCE.
BLENDER HAS CENTER BOTTOM OUTLET WITH APPROX. 6" DIAMETER HAND OPERATED
DISCHARGE VALVE. |
|
22483 |
40 |
CS |
40 CU FT C/S RIBBON BLENDER
Used carbon steel double ribbon blender.
Vessel is 30 inch dia. x 96 inches long x 36 inches deep with a 3
inch C/S shaft. 10 inch x 12
inch end discharge. Driven by 5
HP, 230/460 V, 3 phase, 1740 RPM motor with gear box to chain drive.
Overall ht. 86 inches, length 123 inches, width 58 inches.
M51. |
|
23572 |
40 |
SS |
Used Day 40 cu ft
working capacity stainless steel sanitary double ribbon mixer. Trough
measures 30" wide x 32" deep x 80" long. 4" diameter center shaft. Two piece
top cover. Outboard pillar block bearings. Driven by a 20 hp 3/60/230-460
volt motor through Louis Allis reducer. Chain and sprocket drive. 6"
pneumatic center discharge. Mounted on stainless extension legs. |
|
23730 |
44 |
CS |
USED APPROX. 44 CU.FT. WORKING CAPACITY CARBON
STEEL PADDLE BLENDER. TROUGH APPROX. 33" WIDE X 90" LONG X 20" STRAIGHT
SIDE, CURVED BOTTOM APPROX. 16" DEEP, CENTER BOTTOM DISCHARGE. 3" DIA. SHAFT
WITH (5) PAIRS OF PADDLE BLADE ARM, MULTI-PITCH. CHAIN DRIVEN BY A 20 HP
GEAR HEAD MOTOR W/6" DIA. SPROCKET, 32" DIA. SPROCKET ON MIXER SHAFT. WITH
CATWALK AND TWO SMALL FEED HOPPERS. |
|
23285 |
45 |
SS |
45 Cubic Foot Working Capacity Double Ribbon
Blender
Approx. 36" wide X 7' long X 38" deep. Interupted ribbons. Outboard
bearing with split packing. Stainless steel cover with 35" X 24" loading
section with breaker bars. 10 hp motor 3 phase 60 cycle 208-220/440 volt,
with reducer output rpm 155 to sprocket. (requires chain). Mild steel frame.
6" center bottom outlet. |
|
22474 |
50 |
304SS |
One used Young Double Ribbon Blender, 304SS, ,
50 cu ft capacity, Stainless ribbon has abolt on teflon wiper.
10"bottom end outlet. Chain driven. 17 RPM ribbon. 7.5 HP, 1740 RPM, 575
volt, 8.6 amp, motor into gear reducer ratio 20.9:1, 94 rpm output. 36"x 84" |
|
23731 |
50 |
ST |
USED APPROX. 50 CU.FT. STEEL JACKETED PLOUGH
STYLE MIXER. 42" O.D. X 72" LONG. HAS CENTER BOTTOM DISCHARGE TO SCREW
CONVEYOR TAKE AWAY. SCREW CONVEYOR DRIVEN BY 15 HP MOTOR. 2 BLADE DESIGN
PLOUGH INTERNAL. USED ON ASPHALT COMPOSITE. |
|
22478 |
55 |
SS/CS jkt |
Used BEARDSLEY & PIPER 55 CU.FT. DOUBLE RIBBON
BLENDER. THE MODEL NUMBER IS PRB55 AND THE SERIAL IS PRB55-128-8008-1024.
THIS UNIT HAS A PNEUMATIC KNIFE VALVE, AIR
PURGE SEALS AND A LOW PRESSURE JACKET. IT HAS 8"
CENTER BOTTOM DISCHARGE. THE OVERALL DIMENSIONS ARE 92" H X 51" W X
130" L . IT COMES EQUIPPED WITH A 20 HP DRIVE. 230/460 VAC 3 PH POWER
REQUIRED. IT IS CONSTRUCTED OF STAINLESS STEEL WITH A CARBON STEEL JACKET
AND IS IN GOOD CONDITION. |
|
23386 |
55 |
SS |
UNUSED - American Process, Ribbon Blender, 55
CU FT, SS, Manufactured on 2002, w/ 40 HP 230/460V 3PH, 1775 RPM, 95 Amps,
never installed-built for a powdered drink blending operation. |
|
22487 |
60 |
SS |
60 CU FT MARION STAINLESS STEEL PLOW MIXER
Details: Non jacketed unit with 6 inch bottom center discharge into a
lower chamber and screw auger for positive discharge. 425 gallon working capacity, 450 total capacity.
Plow blades are 8 inches x 18 inches long.
Shaft speed is approximately 50 RPM.
Shaft dia. is 2 3/4 inches with outboard bearings and seals.
Plows are powered by 20 HP, 208 V, 3 phase, 1755 RPM motor with
belt drive to chain drive gear reduction.
Auger powered by 3 HP, 208 V, 3 phase 1755 RPM motor.
Lower chamber has 20 inch sq. flanged outlet.
O.A.D: 94 inches H x 62 inches W x 136 inches L.
Vessel is 38 inches D x 36 inches W x 96 inches L. |
|
22488 |
60 |
|
60 CU FT KELLEY PLOW MIXER
Details: Used plow mixer with two side/bottom entering highspeed
dispersers. Main shaft is
driven by a 20 HP, 3 phase, 1755 RPM, 230/460 V motor with a Eurodrive
20.7:1 gear reducer and chain drive to sprocket.
Dispersion blades are hydraulically driven. Top is covered with 18 inch x 18 inch charge port and 1/2
inch, 3 inch and 4 inch
fittings. Flanged 12 inch
discharge is reduced to 4 inches with valve.
Shaft is 3 inch dia. s/s.
Outboard pillow bearings and mechanical seals. OAD: 100 inches L x 89 inches
H x 80 inches W. Vessel is 72 inches L x 53 inches D x 42 inches W. |
|
22494 |
63 |
SS |
Day 63 cu/ft ss, sani, 15 hp, w/liquid
injection |
|
22496 |
66 |
SS |
(1) Used Ribbon Blender, S/S, 66 cubic ft,
American Process, 20 HP Drive. |
|
22498 |
66 |
304SS |
Used AMERICAN PROCESS 66 CU FT
RIBBON BLENDER ALL 304 S/S - MIXING CHAMBER IS 37" WIDE - 41" DEEP - 8' LONG
- 8" DIAMETER END DISCHARGE WITH FLANGE - 4" SHAFT INSIDE MIXER - SEW
EURODRIVE SHAFT MOUNTED REDUCER - V BELT DRIVE WITH 32 RPM'S FINAL ON RIBBON - HINGED 3 PIECE COVER - C/S
SUPPORTS PAINTED WHITE - 6 SPRAY NOZZLES IN SIDE OF
CHAMBER FOR LIQUID ADD OR CLEANING. 25 HP 3/60/575/1800 RPM MOTOR OVERALL:
12 3/4' LONG - 45" WIDE
- 63" HIGH |
|
22495 |
68 |
CS |
1 - used approx. 90 cu. ft. total/68
cu. ft. working capacity S. Howes Ribbon Blender. With single inner and
single outer ribbons. Carbon steel construction. Trough dimensions: 36" W x
10' L x 41" D. Chain driven by 20 HP 230/460V motor to gearbox. Drive on
stand. End bottom outlet. With 3 section top cover. Believed to be Mixall
model - 45 lbs./cu. ft. bulk density (3,050 lb. max. load).
|
|
22479 |
70 |
SS Clad |
J.H. DAY COMPANY 70 CU. FT. RIBBON BLENDER WITH
A LOW PRESSURE JACKET. IT IS STAINLESS STEEL CLAD CARBON STEEL CONSTRUCTION.
ITS SERIAL NUMBER IS 75039. THE
THROUGH MEASURES 40 "W X 47"D X 96.5" L. THE DIAMETER OF THE SHAFT IS
5.5". ON ONE END TOP IT HAS TWO 3" FLANGE CONNECTIONS AND IT HAS A 5.5"
BOTTOM DISCHARGE WITH A PNEUMATICALLY OPERATED KNIVE VALVE. THIS UNIT IS
CHAIN DRIVE AND IS POWERED BY A 30 HP GEAR REDUCED MOTOR. 220/440 VAC 3 PH
POWER REQUIRED. HEAVY DUTY. |
|
22493 |
70 |
SS |
Hobart Bl-30,
70 cu/ft hi torque ribbon blen, ss, sanitary,
|
|
22476 |
79 |
CS |
79 CF CARBON STEEL DOUBLE RIBBON
MIXER. RATED MIXING CAPACITY: 39/59 CU. FT. MFG:
INDUSTRIAL SCREW CONVEYOR. MODEL:
36090. SN: N/K DIMENSIONS: 37” INSIDE WIDTH X 90” INSIDE LENGTH X 48” DEEP.
OVERALL LENGTH: 126”. OVERALL HEIGHT: 93”. DISCHARGE 41” H. BOTTOM CENTER
DISCHARGE 8” BUTTERFLY VALVE.
RIBBON: ON 3” DIA. SHAFT. 36” DIA. 40 RPM. HEAVY DOUBLE. OUTBOARD PED
ANTI-FRICTION BEARINGS, STUFFING BOX SEALS. DRIVE/MOTOR: 10 HP GE, TEFC,
3PH, 60HZ, 230/460VAC 1750 RPM. REDUCER: FALK #2207J, RATIO: 24.99:1.
(CATALOG FINAL RPM 40) WITH 3-PIECE COVER AND SAFETY SCREEN. |
|
22473 |
80 |
SS |
1-USED LOWE INDUSTRIES MODEL C80 80 CU.FT.
WORKING CAPACITY STAINLESS STEEL DOUBLE RIBBON BLENDER.
DIMENSIONS APPROX. 40" WIDE BY 96" LONG BY 48" DEEP. DRIVEN BY 30HP
3/60/230-460 VOLT MOTOR AND SHAFT
MOUNTED SPEED REDUCER. WITH AIR PURGED SEALS AND
ANTI-FRICTION BEARINGS, BLENDER HAS HINGED LIDS
W/CENTER GRATE. WITH 8" DIAMETER CENTER BOTTOM DISCHARGE W/AIR OPERATED
VALVE. |
|
22475 |
80 |
CS |
80 CU FT c/s blender double ribbon
ID 40" X 120" X 44",O/A 50"X13'6"X60" PLUS DRIVE
HORIZONTAL, JACKETED (2)1.25"SI,(2)6"TI,4"X8"TV,HINGED LIDS (3), 2.5"SJI/O'S
& BJI/O 550V
3PH 60CYC GE 25 HP
1200 RPM CHAIN DRIVE
JACKETED,HEAVY DUTY,I-BEAM SUPPORTS,GOOD CONDITION |
|
22497 |
80 |
Steel |
(1) Used Ribbon Blender, Steel, 80
cubic ft, complete w/Drive
|
|
22484 |
85 |
FRP lined |
85 CU FT FIBERGLASS LINED RIBBON BLENDER
Used carbon steel double ribbon blender with FRP lined vessel.
Shaft and blades are not lined.
Vessel is 36 inches wide x 144 inches long x 41 inches deep.
Chain drive. #13 |
|
23732 |
96 |
CS |
USED DAY RIBBON BLENDER. 96 CU.FT. WORKING
CAPACITY, CARBON STEEL CONSTRUCTION. 42" WIDE X 10' LONG TROUGH. DOUBLE
RIBBON. OUTBOARD ROLLER BEARINGS. PACKING GLANDS. JACKETED TROUGH. 8" CENTER
BOTTOM OUTLET. ON LEGS. WITH 36" DISCHARGE HEIGHT. |
|
23733 |
96 |
ST |
USED APPROXIMATELY 96 CU. FT. WORKING CAPACITY
DOUBLE RIBBON BLENDER. TROUGH MEASURES APPROXIMATELY 40" WIDE X 10' LONG.
END BOTTOM DISCHARGE. LAST USED WITH 25 HP MOTOR AND GEAR REDUCER. |
|
23457 |
100 |
SS |
100 CUBIC FOOT (APPROX.) STAINLESS STEEL DOUBLE
RIBBON BLENDER, 96" LONG X 48" DIAMETER X 54" DEEP, OUTBOARD BEARINGS,
STANDARD PACKING GLANDS, 8" DIAMETER END DISCHARGE, (51" FROM FLOOR), IRIS
TYPE VALVE, HINGED SPLIT COVERS WITH SAFETY GRATES, 20 HP HEAVY DUTY GEAR
REDUCTION DRIVE: 42:1 RATIO, 80
TOOTH & 25 TOOTH SPROCKETS (APPROX. 12-13 RPM), 3 PHASE, 60 CYCLE, 220/440
VOLT. |
|
23300 |
120 |
Hastelloy C-276 |
Used Jaygo model JRB-120 approximately 120
cubic foot working capacity Hastelloy C-276 contacts, #4, 180 grit finish
double ribbon vacuum dryer mixer. Design vacuum operation internal and 125
psi jacket @ 345° F. ASME code stamp. Trough 120" X 44" wide X 48" deep. The
jacket is T304 SS covered with 2" fiberglass insulation, and 146A aluminum
outer skin. Main shaft approx. 5" diameter. Inner ribbon is an auger type,
outer is double helix. Shaft mounted gearbox with flanged mounted motor 30
HP 3/60/230-460 Volt providing 18 RPM output @ 60 Hz. Has SEW inverter
capable of speed range of 2.5 to 25 rpm. Dezurik knife gate valve 8"
diameter, pneumatically operated. Flanged and bolted dome top cover jacketed
and with 1/8 thick Viton gasket between blender and top flange. With control
panel which allows for remote operation of unit, varible speeds forward and
reverse. With vacuum filter housing, jacketed & vacuum mounted to 10" nozzle
on dome cover. Unit supported from steel legs having approx 16" clearance
from floor. |
|
23326 |
120 |
Hastelloy C-276 |
Used Jaygo model JRB-120 approximately 120
cubic foot working capacity Hastelloy C-276 contacts, #4, 180 grit finish
double ribbon vacuum dryer mixer. Design vacuum operation internal and 125
psi jacket @ 345° F. ASME code stamp. Trough 120" X 44" wide X 48" deep. The
jacket is T304 SS covered with 2" fiberglass insulation, and 146A aluminum
outer skin. Main shaft approx. 5" diameter. Inner ribbon is an auger type,
outer is double helix. Shaft mounted gearbox with flanged mounted motor 30
HP 3/60/230-460 Volt providing 18 RPM output @ 60 Hz. Has SEW inverter
capable of speed range of 2.5 to 25 rpm. Dezurik knife gate valve 8"
diameter, pneumatically operated. Flanged and bolted dome top cover jacketed
and with 1/8 thick Viton gasket between blender and top flange. With control
panel which allows for remote operation of unit, varible speeds forward and
reverse. With vacuum filter housing, jacketed & vacuum mounted to 10" nozzle
on dome cover. Unit supported from steel legs having approx 16" clearance
from floor. |
|
23438 |
120 |
SS |
ONE (1) Used 120 cu. ft. Day Ribbon Blender,
all sanitary stainless steel construction including trough, ribbon, end
plates, legs and guards, 44" wide x 120" long trough, doubleribbon, outboard
roller bearings, packing glands, 12" centerbottom outlet with pneumatic
slide gate valve, chain and sprocket driven with 50 H.P. 460 volt XP motor
drive, on legs with 32" discharge height |
|
23439 |
120 |
304 SS |
ONE (1) Used American Process (Eirich)
Horizontal Paddle Blender, 120 cu. ft. working capacity, Model PB-120, 304
stainless steel construction, 44" wide x 120" long trough, dimple jacketed
for 125 PSI @ 350 degrees F, roller bearings, 25 H.P. motor, 3/60/460 volt
with Eurodrive Reducer, Chain and Sprocket Drive, 15 RPM agitator speed, 4
1/2" shaft diameter. Blender has hinged top covers, (2) 28" x 24" side
access doors, 12" x 12" center discharge,with pneumatic slide gate, 1989,
excellent condition. |
|
23734 |
120 |
304 SS |
USED 120 CUBIC FOOT AMERICAN PROCESS SYSTEMS
(EIRICH) HORIZONTAL PADDLE BLENDER MODEL PB-120. 304 STAINLESS STEEL CONTACT
PARTS, 7 GAUGE CONSTRUCTION, INCLUDES DIMPLE JACKET WITH ASME CODE STAMP,
RATED AT 125 PSI @ 350° F. DRIVEN BY 25 HP 1765 RPM 230/460 VOLT MOTOR TO
EURO DRIVE REDUCER WITH 29.00 TO 1 RATIO AND CHAIN AND SPROCKET DRIVE (34"OD
MIXER SPROCKET), BUT MISSING MOTOR SPROCKET. INCLUDES 22" X 24" HINGED
ACCESS DOORS, (2) 24"X24" TOP ACCESS DOORS, AND CENTER BOTTOM 12" DISCHARGE.
SPARE PARTS INCLUDE SPARE BLENDER SHAFT ASSEMBLY, SPROCKET FOR MIXER (34"
OD), EURO DRIVE GEARBOX WITH 29.25/1 RATIO, AND (6) SS MIXER BLADES. MFD
1995. |
|
23735 |
120 |
CS |
USED DAY RIBBON BLENDER. 120 CU.FT. WORKING
CAPACITY, CARBON STEEL CONSTRUCTION. 44" WIDE X 10' LONG TROUGH, DOUBLE
RIBBON. OUTBOARD ROLLER BEARINGS. PACKING GLANDS, JACKET TROUGH. 30 HP GEAR
HEAD MOTOR. CHAIN AND SPROCKET DRIVEN. 8" CENTER BOTTOM OUTLET. ON LEGS.
WITH 36" DISCHARGE HEIGHT. |
|
23736 |
120 |
CS |
USED DAY RIBBON BLENDER. 120 CU.FT. WORKING
CAPACITY, CARBON STEEL CONSTRUCTION. 44" WIDE X 10' LONG TROUGH, DOUBLE
RIBBON. OUTBOARD ROLLER BEARINGS. PACKING GLANDS, JACKET TROUGH. 30 HP GEAR
HEAD MOTOR. CHAIN AND SPROCKET DRIVEN. 8" CENTER BOTTOM OUTLET. ON LEGS.
WITH 36" DISCHARGE HEIGHT |
|
23737 |
120 |
CS |
USED DAY RIBBON BLENDER 120 CU.FT. WORKING
CAPACITY, CARBON STEEL CONSTRUCTION, 44" WIDE X 10' LONG TROUGH. DOUBLE
RIBBON. OUTBOARD ROLLER BEARINGS, PACKING GLANDS, JACKET TROUGH. 30 HP GEAR
HEAD MOTOR. CHAIN AND SPROCKET DRIVEN. 8" CENTER BOTTOM OUTLET. ON LEGS.
WITH 36" DISCHARGE HEIGHT. |
|
23738 |
120 |
SS |
USED APPROXIMATELY 120 CUBIC FOOT WORKING
CAPACITY PADDLE BLENDER. STAINLESS STEEL TROUGH. CARBON STEEL SHAFT AND
PADDLES. STAINLESS STEEL DIMPLE JACKET. LOW PRESSURE. 30 HP, 3 PHASE, 60
CYCLE, 220-260-440 VOLT MOTOR WITH A FORTIS GEAR. CHAIN DRIVEN. |
|
23739 |
130 |
SS |
USED APPROX. 130 CUBIC FOOT STAINLESS STEEL
DOUBLE RIBBON MIXER. 4" WIDE X 12' LONG X 56" DEEP, RIBBON IS 2.5" WIDE X
1/2" THICK, WITH PACKING GLANDS. BOTTOM END, AND CENTER 10" FLANGE
DISCHARGES. RATED 20#/CUBIC FOOT MATERIAL. HAS BOLT ON PEAKED STAINLESS
STEEL TOP AND 18" X 36" OPENING WITH SWING COVER. |
|
21081 |
133 |
SS |
Will-Flow Perma-San 1,000 Gallon , 133 Cu Ft.
Sanitary, S/S Jacketed Paddle Mixer with Lid M/N 1,000-JHR,
S/N 14898, 133cu.ft. Capacity, Jacket 55 PSI @ 300 deg.f., 3HP,
208-220/440V, 2" Bottom End Discharge, Light Slurry Duty |
|
23740 |
135 |
CS |
One (1) used approximately 135 cu.ft. working
capacity ribbon/paddle mixer. Carbon steel construction. 48" wide x 122"
long x 54" deep non-jacketed trough. 3-1/4" diameter shaft. 10" x 20" end
bottom outlet 54" clearance. On structural support. With motor. |
|
23437 |
140 |
SS |
One used approx 140 cu ft. working capacity
(160 total) SS Ribbon Mixer.
44"wide X 53"deep, 10 ft long inside mixing chamber, shaft is 4
1/2" at B.P. bearings - 8" inside mixer.
Dimple jacket is designed for low pressure steam or water on mixing
chamber. Ribbons are 3"x 3/8" & 2"X 5/8". Two bottom 3"discharges;
chain drive 30 HP 3/60/230/460 gearhead motor, ratio 17.93 to 1.
Overall size: 15 1/2 ft. long, 6 ft. High, 5 ft. wide. |
|
23741 |
142 |
CS |
USED ROSS 142 CUBIC FOOT, WORKING CAPACITY
RIBBON BLENDER. MODEL 42A-155, CARBON STEEL. 51" WIDE X 120" LONG JACKETED
TROUGH. RATED 60 PSI AT 307 DEGREES F. DOUBLE RIBBON, OUTBOARD ROLLER
BEARINGS, PACKING GLANDS. 6" DIAMETER SHAFT, OUTER RIBBON 2-1/2" WIDE X 3/8"
THICK. INNER 2" WIDE X 1/2" THICK. WELDED TO 1-1/2" DIAMETER POSTS. 1-PIECE
TOP COVER, INTERNAL SPRAY NOZZLES. DRIVEN BY A 40 HP 3/60/230/460 VOLT, 1775
RPM MOTOR THROUGH A DODGE TORQUE ARM MODEL TXT9, RATIO 25.60 TO 1. CENTER
BOTTOM OUTLET, 4" END BOTTOM OUTLET WITH VALVES. MOUNTED ON LEGS.
APPROXIMATELY 36" DISCHARGE HEIGHT. SERIAL #63434-B. NB #405. BUILT 1994. |
|
23742 |
144 |
CS |
USED DAY RIBBON BLENDER. 144 CU.FT. WORKING
CAPACITY, CARBON STEEL CONSTRUCTION. 44" WIDE X 12' LONG TROUGH. DOUBLE
RIBBON. JACKETED TROUGH. OUTBOARD ROLLER BEARINGS. PACKING GLANDS. 30 HP
GEAR HEAD MOTOR, CHAIN AND SPROCKET DRIVEN. 8" CENTER BOTTOM OUTLET. ON
LEGS. WITH 36" DISCHARGE HEIGHT. |
|
23743 |
144 |
CS |
USED DAY RIBBON BLENDER. 144 CU.FT. WORKING
CAPACITY, CARBON STEEL CONSTRUCTION. 44" WIDE X 12' LONG TROUGH. DOUBLE
RIBBON. JACKETED TROUGH. OUTBOARD ROLLER BEARINGS. PACKING GLANDS. 30 HP
GEAR HEAD MOTOR, CHAIN AND SPROCKET DRIVEN. 8" CENTER BOTTOM OUTLET. ON
LEGS. WITH 36" DISCHARGE HEIGHT |
|
23744 |
144 |
CS |
USED DAY RIBBON BLENDER. 144 CU.FT. WORKING
CAPACITY, CARBON STEEL CONSTRUCTION. 44" WIDE X 12' LONG TROUGH, DOUBLE
RIBBON. JACKETED TROUGH. OUTBOARD ROLLER BEARINGS. PACKING GLANDS, 25 HP
GEAR HEAD MOTOR. CHAIN AND SPROCKET DRIVEN. 8" CENTER BOTTOM OUTLET. ON
LEGS. WITH 36" DISCHARGE HEIGHT. |
|
23745 |
150 |
CS |
USED READCO RIBBON BLENDER.
150 CU.FT. WORKING CAPACITY, CARBON STEEL CONSTRUCTION. 48" WIDE X 12' LONG
TROUGH, DOUBLE RIBBON. JACKETED TROUGH. OUTBOARD ROLLER BEARINGS. PACKING
GLANDS, 30 HP GEAR HEAD MOTOR. CHAIN AND SPROCKET DRIVEN. 8" CENTER BOTTOM
OUTLET. ON LEGS. WITH 36" DISCHARGE HEIGHT. NB # 220 RATED FOE15 PSI AT 300
F. SHELL 5/16" OUTSIDE 3/16" |
|
23746 |
150 |
SS |
USED APPROXIMATELY 150 CUBIC FOOT WORKING
CAPACITY STAINLESS STEEL CLAD DOUBLE RIBBON MIXER. 54" WIDE X 60" DEEP X
120" LONG. INNER RIBBON 1/4" THICK X 2" WIDE. OUTER RIBBON 1/2" THICK X 2"
WIDE. BOLTED REMOVABLE SHAFT. 6" CENTER BOTTOM DISCHARGE. 1/2 LOOSE TOP
COVER. DUAL DRIVE SPROCKET. 30 HP 3/60/460 VOLT MOTOR DIRECT COUPLED TO GEAR
REDUCER. |
|
23444 |
151 |
304 SS |
One used approx. 151 Cu ft. working cap. Scott
Ribbon Blender.
304 SS, 25 HP 3/60/230/460/TEFC Motor - Chain drive. Bottom end 6"
diameter discharge. Shaft is 3 15/16 " dia. At pillow block beaings, top cover
with hinged manhole. Dimple
jacket for low pressure steam or water.
Final Ribbon RPM's is approx. 24.
OAL 6'H X 54"W X 15'4"L |
|
23440 |
155 |
SS |
ONE (1) Used 155 cu. ft. Day Ribbon Blender,
stainless steelconstruction, 50" wide x 120" long trough, double ribbon
outboard roller bearings with air purge seals, 15 PSI jacketed trough, 8"
center bottm outlet with hand operated slide gate valve, chain and sprocket
driven, 25 H.P. drive, 220/440 volt, 84" deep trough, 36" discharge height,
O.A.D. approx. 15' L x 11' T x 7' W. |
|
23747 |
160 |
Monel |
USED APPROXIMATELY 160 CUBIC FOOT WORKING
CAPACITY SINGLE RIBBON BLENDER. MONEL PRODUCT CONTACTS INCLUDING SHAFT AND
RIBBON AND HAS A CARBON STEEL TROUGH AND COVER WITH MONEL LINING. TROUGH
MEASURES 54" WIDE X 32" STRAIGHT SIDE X 120" LONG. SINGLE INTERRUPTED RIBBON
WITH TOOTH EDGE AND 1/2" THICK X 2 3/4" WIDE FLIGHT. 3" DIAMETER SHAFT.
DOUBLE CHAIN DRIVEN THROUGH 50 HP 17.3:1 GEAR REDUCER (REQUIRES MOTOR).
CENTER DISCHARGE WITH VALVE. HINGED COVER. STEEL BEAM LEG SUPPORTS,
APPROXIMATELY 24" DISCHARGE CLEARANCE. |
|
23748 |
185 |
ST |
USED 185 CU.FT. SPROUT WALDRON MODEL B-185
STEEL DOUBLE RIBBON, JACKETED BLENDER. PREVIOUSLY USED ON PLASTIC PELLETS.
INCLUDES 60 HP LOUIS ALLIS 3 PHASE 60 HZ, 230/460 VOLT, 1770 RPM, TOTALLY
ENCLOSED FAN COOLED MOTOR. HAS FALK DRIVE MODEL 601-8F73-06A2 GEAR BOX WITH
25.27/1 RATIO. DRIVE SPROCKET IS 16" DIA., DRIVEN SPROCKET IS 52" DIA.
RIBBON RPM APPROX. 21. RIBBON BLENDER IS EQUIPPED WITH 12" END BOTTOM
DISCHARGE BUT ALSO INCLUDES 6" CENTER BOTTOM FLANGE. TROUGH IS 48" WIDE X
138" LONG X 69" DEEP. CENTER SHAFT IS 13" O.D., INNER RIBBON 4" WIDE, OUTER
RIBBON 2" WIDE. JACKET MAXIMUM DESIGN PRESSURE 14.9 PSI. |
|
21089 |
200 |
CS |
Used Ribbon Blender, C/S 10' long x 5' wide,
200cu.ft., Working Capacity, Standard Double Ribbon, Carbon Steel
Construction with Cover, Driven by 50HP, 3/60/230-460V Motor thru Dodge
Reducer |
|
23441 |
200 |
SS |
ONE (1) Used Areco 200 cu. ft. Ribbon Blender,
stainless steel construction, double ribbon, 8" center bottom outlet with
pneumatically operated slide paddle valve, outboard roller bearing, packing
gland, split cover with feed section, high stands, 40 HP motor, gear reducer
with roller chain and sprocket drive, 54" wide x 12' long trough. |
|
23442 |
200 |
SS |
ONE (1) Used Areco 200 cu. ft. Ribbon Blender,
stainless steel construction, double ribbon, 8" center bottom outlet with
pneumatically operated slide paddle valve, outboard roller bearing, packing
gland, split cover with feed section, high stands, motor, gear reducer with
roller chain and sprocket drive, 54" wide x 12' long trough. |
|
23443 |
200 |
SS |
ONE (1) Used Robinson Ribbon Blender, 200 cu.
ft. working capacity, stainless steel construction, 56" wide x 120"
longrough, 6" bottom end discharge with butterfly valve, complete with 40
H.P. motor, belt driven into gear box, fullstainless steel hinged cover on
legs with 3' discharge height. O.A.D. 14' long x 6' wide x 9' tall. |
|
23749 |
200 |
ST |
USED APPROXIMATELY 200 CUBIC FOOT YOUNG DOUBLE
RIBBON BLENDER, STEEL CONSTRUCTION. 30 PSI STAYBOLT JACKET AT 650°F. NB #24.
60" WIDE X 11'3" LONG. 40 HP DRIVE. WITH AIR SEAL. 8" CENTER BOTTOM OUTLET,
PNEUMATIC VALVE. (2) 9" OPENINGS ON TOP. (3) PNEUMATIC OPENING TOP COVERS,
36" X 60". 40 HP MOTOR COUPLED TO DODGE REDUCTER SIZE DCR6, 104 RPM OUTPUT,
16.86 RATIO. |
|
23750 |
200 |
SS |
USED APPROXIMATELY 200 CUBIC FOOT
KOPPERS/SPROUT WALDRON STAINLESS STEEL DOUBLE RIBBON BLENDER, MODEL
B200-BATCH. APPROXIMATELY 200 CUBIC FOOT WORKING CAPACITY. 5'4" WIDE X 9'
LONG TROUGH. 30 HP DRIVE. AIR PURGE SEAL. 10" CENTER BOTTOM OUTLET WITH AIR
VALVE. WITH COVERS. 48" x 60" HINGED TOP COVER PNEUMATIC. 36" X 20" FEED
OPENING ON TOP. (3) 12" TOP OPENINGS. 30 HP @ 190/380 VOLTS, 40 HP @ 230/460
VOLTS. MOTOR COUPLED TO FOOTE-JONES GEAR REDUCER, 105.9 RATIO, MODEL
HLE-1-1103, S/N 1C65321, INPUT 1750 RPM, 40 HP, SERVICE FACTOR 1.0. |
|
23751 |
200 |
SS |
USED APPROXIMATELY 200 CUBIC FOOT
KOPPERS/SPROUT WALDRON STAINLESS STEEL DOUBLE RIBBON BLENDER, MODEL
B200-BATCH. APPROXIMATELY 200 CUBIC FOOT WORKING CAPACITY. 5'4" WIDE X 9'
LONG TROUGH. 30 HP DRIVE. AIR PURGE SEAL. 10" CENTER BOTTOM OUTLET WITH AIR
VALVE. WITH COVERS. 48" x 60" HINGED TOP COVER PNEUMATIC. 36" X 20" FEED
OPENING ON TOP. (3) 12" TOP OPENINGS. 30 HP @ 190/380 VOLTS, 40 HP @ 230/460
VOLTS. MOTOR COUPLED TO FOOTE-JONES GEAR REDUCER, 104.535 RATIO, FRAME
1103-HLE, S/N 425185 |
|
23752 |
200 |
ST |
USED APPROXIMATELY 200 CUBIC FOOT YOUNG DOUBLE
RIBBON BLENDER, STEEL CONSTRUCTION. 30 PSI STAYBOLT JACKET AT 650°F. NB #24.
60" WIDE X 11'3" LONG. 40 HP DRIVE. WITH AIR SEAL. 8" CENTER BOTTOM OUTLET,
PNEUMATIC VALVE. (2) 9" OPENINGS ON TOP. (3) PNEUMATIC OPENING TOP COVERS,
36" X 60". 40 HP MOTOR COUPLED TO DODGE REDUCTER SIZE DCR6, 104 RPM OUTPUT,
16.86 RATIO. |
|
23753 |
200 |
ST |
USED STRONG SCOTT STEEL 1400 GALLON
(APPROXIMATELY 200 CUBIC FOOT) DIMPLE JACKETED DOUBLE RIBBON BLENDER. HAS
CENTER BOTTOM OUTLET, AND EQUIPPED WITH AUXILIARY END BOTTOM OUTLET. DRIVEN
BY 30 HP MOTOR SUPPLYING 22 RPM RIBBON SPEED. HAS APPROXIMATELY 62" X 120"
CHAMBER. S/N 2655. JACKET RATED AT 50 PSI AT 294 DEGREES F. |
|
23754 |
200 |
ST |
USED STRONG SCOTT STEEL 1400 GALLON
(APPROXIMATELY 200 CUBIC FOOT) DIMPLE JACKETED DOUBLE RIBBON BLENDER. 62"
WIDE X 120" LONG TROUGH WITH CENTER BOTTOM OUTLET. DRIVEN BY 30 HP MOTOR
SUPPLYING 22 RPM RIBBON SPEED. HAS AUXILIARY END BOTTOM OUTLET. SERIAL
NUMBER 2630. JACKET RATED AT 50 PSI AT 294 DEGREES F. |
|
23755 |
230 |
SS |
USED APPROXIMATELY 230 CUBIC FOOT KELLEY DUPLEX
STAINLESS STEEL DOUBLE RIBBON BLENDER. MODEL 6010. 60" WIDE X 10' LONG
TROUGH. 60 HP CHAIN DRIVE. AIR SEAL. 16" X 20" CENTER BOTTOM OUTLET.
PNEUMATIC OPENING. 24" X 30" TOP FEED OPENING. 60" X 72" HINGED TOP COVER.
ELECTRIC GEARHEAD MOTOR DRIVEN. 60 HP MOTOR COUPLED TO DODGE GEAR REDUCER
SIZE TXM900, OUTPUT 67 RPM, 26.00 RATIO. (4) 12" OPENING ON TOP. |
|
23756 |
230 |
SS |
USED APPROXIMATELY 230 CUBIC FOOT KELLEY DUPLEX
STAINLESS STEEL DOUBLE RIBBON BLENDER. MODEL 6010. 60" WIDE X 10' LONG
TROUGH. 60 HP CHAIN DRIVE. AIR SEAL. 16" X 20" CENTER BOTTOM OUTLET.
PNEUMATIC OPENING. 24" X 30" TOP FEED OPENING. 60" X 72" HINGED TOP COVER.
ELECTRIC GEARHEAD MOTOR DRIVEN. 60 HP MOTOR COUPLED TO DODGE GEAR REDUCER
SIZE TM900, OUTPUT 67 RPM, 26.00 RATIO. (4) 12" OPENING ON TOP. |
|
23757 |
250 |
304 SS |
USED YOUNG INDUSTRIES 250 CUBIC FOOT WORKING
CAPACITY T-304 STAINLESS STEEL HEAVY DUTY DOUBLE RIBBON MIXER. SIZE 250S.
TROUGH MEASURES 72" WIDE X 82" HIGH X 108" LONG. DRIVEN BY 40 HP MOTOR THRU
GEARBOX. CHAIN AND SPROCKET DRIVEN. END DISCHARGE. MOUNTED ON CHANNEL IRON
FRAMEWORK. BUILT 1986. |
|
23339 |
270 |
CS |
One Mixing Line including Four (4) CS Ribbon
Blenders with total Mixing capacity of approx. 270 cu. Ft.
Mixers 1, 2, & 3 approx. 72 cu. Ft. and 4 approx. 54 Cu. Ft. CBO with
pneumatic valves.
Includes blower and wet scrubber for dust control, Mezzanine, (2)
elevators with 3,000 lbs capacity 5' x 5' platform, 9' H |
|
23758 |
300 |
SS |
USED APPROXIMATELY 300 CUBIC FOOT SPROUT
WALDRON STAINLESS STEEL CLAD, JACKETED RIBBON BLENDER 68" DIAMETER X 143"
LONG. HAS STAINLESS STEEL RIBBON, 2" WIDE OUTER RIBBON, 4" WIDE INNER
RIBBON, CENTER BOTTOM OUTLET WITH AIR ACTUATED VALVE. MAIN DRIVE IS 40 HP,
208-220/440 VOLT. NO COVER. |
|
23759 |
350 |
SS |
USED STAINLESS STEEL RIBBON MIXER HAVING AN
APPROXIMATE WORKING CAPACITY OF 350 CUBIC FEET. TROUGH MEASURES 72" WIDE X
72" DEEP X 144" LONG. END BOTTOM DISCHARGE. UNIT IS DRIVEN BY A 40 HP MOTOR
WITH GEAR REDUCER. MOTOR AND GEARBOX ARE MOUNTED ON THE SAME BASE AS THE
BLENDER. |
|
23760 |
|
