|
Item
ID |
Capacity |
Material |
Description |
|
24688 |
0.2 |
SS |
1-Patterson
Kelly 8 quart Stainless Steel Liquid Solids "V" blender. This
blender features stainless steel shell & table top design stand.
Includes 2 change covers & slide discharge valve. Includes
Liquid/Solids intensifier bar. Dual fractional HP motors (1/60/110-220V).
Good condition. |
|
24690 |
1 |
SS |
1- Unused Gemco 1 cu ft Stainless Steel Slant Cone Blender,
Model Solids. This unit was manufactured 1992 & never used. Lexan
interlocked front & back guards which still have protective papering.
Unit on casters for portability. Standard charge cover & discharge
valve. Maximum bulk density 90lb/cuft. 1 HP (3/60/208-230/460V) motor.
Controls included. |
|
24689 |
1 |
SS |
1-Patterson
Kelly 1 cu ft Stainless Steel "V" Blender, Model Solids.
This is a standard "V" blender w/ the shell driven by a
1/4 HP (1/60/115-230V) motor. Butterfly
valve discharge, dual charge covers, max bulk density is 190 lbs/cu ft. |
|
23764 |
1 |
CS |
USED APPROX. 1
CUFT WORKING CAPACITY DOUBLE CONE BLENDER. CARBON STEEL CONSTRUCTION.
CHAIN DRIVEN THROUGH AN APPROX. 3/4 HP GEARHEAD MOTOR. MOUNTED ON STANDS.
HAS 6" DIA. BUTTERFLY DISCHARGE VALVE. APPROX. 1.47 CUFT TOTAL
CAPACITY. |
|
21091 |
1 |
SSS |
Used PK Lucite
Vee Blender Body 4qt. Body is 4 1/2" I/D, Bar is 4", Last use
was Flavors and Fragrances |
|
24707 |
2 |
SS |
Patterson-Kelley
Twin Shell Blender, 2cu.ft working capacity, S/S contruction, 300#cu.ft
material density, 3/4 HP shell, standard feed ports, butterfly valve
discharge. |
|
24691 |
2 |
SS |
One used
Patterson Kelly 2 cu ft Stainless Steel Twin Shell Liquid/Solids Blender. This blender was new in 1998 & is in superb condition.
The liquid/solids bar is easily disassembled & features a
removable cartridge design which houses all seals/bearings & which
establishes the highest degree of cleanliness (latest style).
Stainless steel shell & contacts, painted supports, twin charge
covers, butterfly valve. Includes
prewired control package in NEMA 4 SS box w/ motor starters/overload
heaters/push buttons/3 timers (shell, bar, preblend). |
|
24471 |
2 |
SS |
UNUSED
APPROXIMATELY 2 CUBIC FOOT PATTERSON KELLEY STAINLESS STEEL CROSS FLOW
V-BLENDER. RATED 245 LB/CUFT.
SERIAL #093290. 1 HP MAIN DRIVE, 230/460 VOLT TEFC. INCLUDES CUTLER HAMMER START/STOP CONTROL BOX. MOUNTED ON
STAND GIVING 28" CLEARANCE. |
|
23767 |
2 |
SS |
USED PAUL O
ABBE 2 CUBIC FOOT DOUBLE CONE JACKETED MIXER. STAINLESS STEEL
CONSTRUCTION. INTERNAL RATED 150 PSI @ 365°F. JACKET RATED 150 PSI @ 365°F.
NATIONAL BOARD . DRIVEN BY US VARI-SPEED DRIVE .75 HP 3/60/230-460 VOLT
MOTOR. PNEUMATIC BALL VALVE DISCHARGE. MOUNTED ON STAND. |
|
23766 |
2 |
SS |
ONE USED
PATTERSON KELLEY 2 CUBIC FOOT WORKING CAPACITY TWIN SHELL BLENDER.
STAINLESS STEEL CONSTRUCTION. RATED AT 85 POUNDS PER CUBIC FOOT. MIXER
DRIVEN BY APPROXIMATELY 1/2 HP MOTOR. WITH HIGH-SPEED INTENSIFIER BAR. |
|
23765 |
2 |
CS |
One (1) used
Paul O Abbe 2.5 cu. ft. working capacity carbon steel double cone blender.
24" Diameter X 9" straight side. Equipped with 1 HP 3/230/460
volt pin type intensifier bar. 3/4 HP main drive. 8" Feed port.
6" Bottom discharge. On structural support giving 48" clearance.
Complete with starter and controls. Overall height 87". |
|
23284 |
2 |
SS |
2 cubic foot
capacity. Stainless steel contacts. Rated at 300 # per cuft maximum
density. 3/4 hp motor with reducer and chain. Unit includes covers, bottom
valve and on/off control box. |
|
21088 |
2 |
SS |
8qt. PK Twin
Shell Blender, S/S Mfg. by Patterson - Kelly, S/S Construction, Fractional
Horsepower Main Drive with Covers Mounted on Stand, Unit can take
Liquid/Solids Bar |
|
24709 |
3 |
SS |
Patterson
Kelley Twin Shell Blender, 3cft working capacity, stainless steel
construction, 60lb per cft maximum material density, liquids/ solids
intensifier bar, jacketed shell, on stands with P-K Wafer valve, motor
drives |
|
24708 |
3 |
SSS |
Patterson-Kelley
3cft twin shell lab scale V-Blender Maximum material density: 60lb per
cubic foot Main drive: 3/4 Hp. Intensifier Drive: 2Hp. Stainless steel
product contact parts Vented covers Includes high speed intensifier bar
Steel-It painted base Dimensions: 60"W x 60"H x 32" D |
|
24693 |
3 |
SS |
1-Patterson
Kelley 3 cu ft Stainless Steel "V" Blender, Model Solids, S/N
212730. Complete w/ dual
charge covers & butterfly discharge valve.
Stainless steel shell driven by a 3/4HP (3/60/220-440V) motor
through a chain & sprocket drive.
Support stand is painted & places the shell discharge height
currently at 17". Good
condition. Maximum bulk density is 230 lbs/cu ft. |
|
24692 |
3 |
SS |
1-Patterson
Kelly 3 cu. ft. Stainless steel "V" blender w/ liquid/solid bar.
This is a standard PK blender w/ liquid solids bar, rated @ 70 lbs.
per cubic foot. Stainless
steel contact parts & stands are mild steel (painted).
Shell is driven by a ¾ hp 3/60/460V motor.
Bar is driven by a 5 hp 3/60/460V motor.
Unit is complete w/ butterfly valve & vented covers.
Mounted on castors for portability.
Good condition. |
|
24604 |
3 |
SSS |
ONE USED
PATTERSON KELLEY APPROXIMATELY 3 CUBIC FOOT SANITARY STAINLESS STEEL CROSS
FLOW BLENDER, MAXIMUM
MATERIAL DENSITY 70 LB/CUFT, WITH 1-1/2 HP MOTOR, 230/460 VOLT, 5/2.5
AMPS, 1735 RPM, 3 PHASE.SET UP FOR 1 HP INTENSIFIER, 230/460V, 3.4/1.7
AMPS, 1735 RPM, 3 PHASE. |
|
24472 |
3 |
SS |
USED PATTERSON
KELLEY 13 QUART STAINLESS STEEL TWIN SHELL BLENDER. NON-JACKETED CHAMBER,
NO INTENSIFIER BAR, OR DRIVE. EACH
SIDE OF MIXER 9.5" O.D. X 16" LONG.
BLENDER CHAIN DRIVEN BY 1/4HP/1PH/60CY/115-230VOLT/ OPEN MOTOR.
(MISSING ONE COVER). |
|
21083 |
3 |
SS |
Used Gertruder
Neutzsch, 3cu.ft., S/S Eccentric Offset Double Cone Blender Varidive with
HP on Stand, 1.1 Kw 220/380-50 Hz |
|
21082 |
3 |
SS |
Used Paul Abbe
3cu.ft. Working " Roto Cone" Blender, S/S on Stand, Chain Drive
S/N A59070, M/N 24 RCB 24" dia x 8", S/S 6" In/Out has an
Intensifier Bar Motor, 3/4HP Drive Motor, 1/3HP Bar Motor, 150 Pounds per
cu.ft. |
|
23783 |
4 |
NA |
USED SINGLE
ARM DRUM TUMBLER ABLE TO HANDLE APPROX A 35 GALLON FIBER DRUM. 19"
CLEARANCE BETWEEN DRUM HOLDERS. UNIT DRIVEN BY 3/4 HP GEARHEAD MOTOR. |
|
24694 |
5 |
316SS |
ONE
NEW/UNUSED V Blender
Working Capacity: 5 cubic foot
Materials of Construction: 316SS contact parts w/ mild steel painted
support stands
Gaskets: White Neoprene for contact gaskets
Internal Finish: 15-25 microinch, all welds ground smooth & flush
External Finish: Buff
Notes: Butterfly discharge valve & clamp type charge covers
Bulk Density: 65 lbs/cubic foot
Drive: 3/4 HP (3/60/460V) trunnion mount Eurodrive w/ brake (TEFC) |
|
24603 |
5 |
SSS |
USED ROSS
MODEL 150 "TURBOLATER" VERTICAL MIXER/GRANULATOR/DRYER, VACUUM
CAPABILITY, JACKETED BOWL, STAINLESS STEEL CONTACTS. BOWL DIMENSIONS
APPROXIMATELY 29-1/2" DIAMETER X 25" DEEP. 25 HP MAIN DRIVE, 2
SPEED MOTOR, SEPARATE CHOPPER WITH 2 HP MOTOR, HYDRAULIC BOWL LIFT WITH 2
HP MOTOR. LAST IN PHARMACEUTICAL SERVICE. |
|
24602 |
5 |
SS |
USED PATTERSON
KELLEY 5 CUBIC FOOT STEEL SOLID LIQUID BLENDER. 150 CUBIC FOOT MAXIMUM
DENSITY. |
|
24578 |
5 |
SS |
DOUBLE CONE
MIXER, GEMCO, 5 CU. FT., CONSTRUCTED OF STAINLESS STEEL, MODEL
"LIQUIDS-SOLIDS", TYPE "DOUBLE CONE". SHELL DRIVEN BY
3/4 HP, 1775 RPM, 208-230/460V, 3-PHASE 60 CYCLE MOTOR, LIQUIDS/SOLIDS BAR
DRIVEN BY 7.5 HP, 1460 RPM, 380V, 50 CYCLE MOTOR. |
|
23769 |
5 |
SS |
USED H.K.
PORTER APPROX 5 CU.FT. STAINLESS STEEL DOUBLE CONE BLENDER. 30" DIA.
SHELL. HIGH STANDS. DRIVE & 1 H.P. MOTOR 3/60/220/440. 62 RPM DRUM
SPEED. |
|
23768 |
5 |
SS |
USED 5 CUBIC
FOOT PATTERSON KELLEY STAINLESS STEEL CROSS FLOW BLENDER. 285#/CUBIC FOOT
DENSITY. 1.5 HP, 230/460 VOLT. |
|
21077 |
5 |
CS |
Patterson
Kelly Steel Twin Shell Dry Blender, Steel,
5cu.ft. Capacity, Density 65# per cu.ft., 7.5HP Motor, 1725 RPM,
V208/220-440 |
|
23770 |
7 |
NA |
7 CUFT SINGLE
ARM DRUM TUMBLER |
|
21093 |
8 |
SS |
S/S Stokes
Blender, M/N 21-AA, 8cu.ft. Working Capacity, 6 Gallon Working Capacity
S/S Construction, 12" wide x 15" long x 15" deep, Hand Tilt
Discharge with Cover Driven by 1/4HP, 1/60/115-230V, 1725 RPM Gear Motor
Mounted on Base & Table with Casters |
|
21085 |
8 |
SS |
Used Patterson
Kelly Zigzag Blender, Size 8, S/S 150# per cu.ft., 2 Motor Machine, S/N PK
276204, PK 276204 |
|
24695 |
10 |
316
SS |
ONE NEW/UNUSED
V Blender
Working Capacity: 10 cubic foot.
Materials of Construction: 316 SS contact parts w/ mild steel painted
support stands.
Gaskets: White Neoprene for contact gaskets.
Internal Finish: 30-35 micro inch, all welds ground smooth & flush
(higher surface finishes upon request).
External Finish: #4 w/ welds color cleaned.
Notes: Butterfly discharge valve & clamp type charge covers.
Bulk Density: 75 lbs/cubic foot.
Drive: 2HP (3/60/230-460V) Trunnion mounted Eurodrive w/ brake
(3/60/220-440V) |
|
24676 |
10 |
SSS |
ONE USED
PATTERSON KELLY STAINLESS STEEL SANITARY LIQUID/SOLIDS 10 CUBIC FOOT
(WORKING CAPACITY) TWIN SHELL BLENDER .
ALL STAINLESS STEEL WETTED PARTS WITH POLISHED INTERNAL AND EXTERNAL FOOD
GRADE FINISH RATED FOR MAXIMUM PRODUCT DENSITY OF 70 LBS PER CUBIC FOOT,
APX. 1.5 HORSEPOWER DRIVE (TAG MISSING) COUPLED TO PARALLEL SHAFT BOSTON
GEAR 20.03 TO 1 REDUCER WITH DINGS ELECTRIC MOTOR BRAKE (230/460/1 PHASE
VOLTAGE) WITH FACTORY CHAIN AND SPROCKET DRIVE YIELDING 20 RPM SHELL SPEED
APX. 2 HORSEPOWER LIQUID SOLIDS INTENSIFIER BAR DRIVE WITH STANDARD BELT
AND PULLEY ARRANGEMENT, ALL DRIVES ARE TEFC 230/460/3 PHASE VOLTAGE,
8" DISCHARGE WITH MANUALLY OPERATED BUTTERFLY VALVE, 17.5"
DIAMETER CHARGING PORTS WITH AIR RELIEF COVERS, MOUNTED IN PAINTED FACTORY
STAND WITH 40" STAND EXTENSIONS.
FORMER APPLICATION COSMETICS. |
|
24703 |
20 |
SS |
One useed 20
cu ft. Patterson Kelley Twin Shell Liquid Solids Blender, stainless steel
construction, rated 65# per cuft maximum material density, liquid feed
intensifier bar w/ 5 HP 230/460volt drive, 2 HP shell drive w/ electric
brake, 230/460, volt standard standard feed ports w/ cover, 8"
discharge w/butterfly valve, on high stands, w/ approximately
80"discharge height. |
|
24702 |
20 |
SS |
One used 20
cuft Patterson Kelley Twin Shell Blender, stainless steel construction,
65# per cuft maximum material density, liquid feed bar w/ 5 H.P. 230/460
volt motor, 2 H.P. 230/460 volt shell drive, standard feed ports w/
covers, 8" diameter discharge w/butterfly valve, on high stands w/
44" discharge height |
|
24681 |
20 |
SSS |
ONE UNUSED
APPROX. 20 CU.FT. WORKING CAPACITY STAINLESS STEEL DOUBLE CONE TUMBLING
BLENDER. THIS 54" WIDE BLENDER IS MOUNTED ON STAINLESS STEEL POLISHED
STAND AND IS DRIVEN BY 7.5 HP 3/60/220 VOLT MOTOR. EQUIPPED WITH APPROX.
8" DIAMETER HAND OPERATED DISCHARGE VALVE, BLENDER HAS APPROX.
15" DIAMETER CHARGING PORT WITH LID. WITH HAND TILT DEVICE FOR
MANUALLY ROTATING BLENDER. |
|
23771 |
29 |
316
SS |
USED GARDNER
MODEL 7C-4'0" 316 TYPE STAINLESS STEEL DOUBLE CONE BLENDER. CONE 4'
(1220 MM) DIAMETER X 1' (300 MM) STRAIGHT SIDE X (2) 2' (600 MM) CONES.
APPROXIMATELY 29 CUFT (825 LITRE) TOTAL CAPACITY, 17.5 CUFT (500 LITRE)
WORKING CAPACITY. MOUNTED IN (2) CARBON STEEL FRAMES. CHAIN DRIVEN BY
BROOK CROMPTON PARKINSON 2.2 KW 415 VOLT 3/50 1420 RPM MOTOR THROUGH
RADICON TYPE 8CA337-RA-20/1 GEARBOX. |
|
24704 |
30 |
SS |
One used
Keith 30 CF V Blender. Features full stainless steel contact parts,
manual butterfly valve, stands and stainless steel covers. Motor is 3 HP,
230/460V 3 phase, 60 HZ and is mounted to a gear reducer with an output of
15 RPM. |
|
24683 |
30 |
SSS |
ONE USED
PATTERSON KELLEY 30 CU.FT. STAINLESS STEEL TWIN SHELL V TUMBLING MIXER
WITH INTENSIFIER BAR.
From a pharmaceutical company. |
|
24677 |
30 |
SSS |
ONE USED
PATTERSON KELLY STAINLESS STEEL SANITARY LIQUID SOLIDS 30 CU/FT (WORKING
CAPACITY) TWIN SHELL BLENDER.
ALL STAINLESS STEEL SHELL AND WETTED PARTS WITH POLISHED INTERNAL AND
EXTERNAL FOOD GRADE FINISH, RATED FOR MAXIMUM PRODUCT DENSITY OF 55
LBS/CUBIC FOOT, THREE HORSEPOWER SHELL DRIVE BY DRESSER ELECTRIC MOTORS
WITH IN LINE 17.1 HELICAL GEAR REDUCER WITH FACTORY BULL AND SPUR DRIVE
AND DINGS ELECTRIC MOTOR BRAKE (230/460/1 PHASE VOLTAGE), 7.5 HORSEPOWER
1755 RPM LIQUID SOLID DISPERSION BAR DRIVE BY GENERAL ELECTRIC WITH
FACTORY BELT AND PULLEY ARRANGEMENT, ALL DRIVES ARE UNDERWRITERS
LABORATORY RATED FOR HAZARDOUS LOCATIONS UNDER CLASS I GROUP D AND CLASS
II GROUPS F & G, MOTOR BRAKE IS RATED FOR GROUPS I AND II, CLASSES C,
D,E, F AND G, INCLUDES ALLEN BRADLEY SWITCH GEAR FOR ALL DRIVES RATED FOR
CLASS I, GROUPS C-D, AND CLASS II, GROUPS EFG SERVICES, 10" DIAMETER
DISCHARGE WITH MANUALLY OPERATED BUTTERFLY VALVE 18" DIAMETER
CHARGING PORTS, WITH AIR RELIEF COVERS, MOUNTED IN PAINTED STEEL FACTORY
STAND EXTENSIONS FOR DRUM HEIGHT DISCHARGE.
FORMER APPLICATION COSMETICS. |
|
23775 |
40 |
SS |
USED 40 CUBIC
FOOT WORKING CAPACITY (60 CUBIC FOOT TOTAL CAPACITY) J.P. DEVINE STAINLESS
STEEL DOUBLE CONE BLENDER. DRIVEN BY 5 HP 1725 RPM MOTOR INCLUDING
STARTER. SERIAL NUMBER D4025 121955. HAS 33" CONE, 60" DIAMETER,
16" STRAIGHT SIDE. INCLUDES PEDESTAL STAND. 100 LBS. PER CU FT
DENSITY MATERIAL. |
|
23774 |
40 |
316
SS |
USED GEMCO 40
CU. FT. WORKING CAPACITY DOUBLE CONE TUMBLING BLENDER. T316 STAINLESS
STEEL. RATED 50#/CU.FT. MATERIAL DENSITY AND FULL VACUUM. ON STANDS. NO
DRIVE. |
|
23773 |
40 |
SS |
USED 40 CU.
FT. BEARDSLEY-PIPER ROTOMIX, STAINLESS STEEL CONTACTS, SANITARY; DRUM 6'
DIA. X 4' WIDE - WITH LOADING UNLOADING DEVICE; 7 1/2 HP 230/460 VOLT
VARIDRIVE. SET ON I BEAM FRAME. DRUM ROTATES ON HORIZONTAL AXIS. ON
TRUNNIONS. INTERNAL FLIGHTS THAT LIFT PRODUCT TO MIX AND DISCHARGE. VOLT
DRIVE CONNECTED TO MORSE 15-1 GEAR REDUCER TO CHAIN AND SPROCKET DRIVE. |
|
23772 |
40 |
SS |
USED PATTERSON
APPROX. 40 CUFT STAINLESS STEEL DOUBLE CONE BLENDER. 5' DIA. SHELL.
INTENSIFIER BAR WITH (4) 18" DIA. SAW TOOTH BLADES, WITH DRIVE.
15" DIA. CHARGE/DISCHARGE PORT, WITH CLAMPED COVER. BULL GEAR DRIVEN,
REQUIRES DRIVE. MOUNTED ON APPROX. 18" HIGH A-FRAME SUPPORTS. |
|
23777 |
50 |
SS |
One (1) used
approximately 50 cu.ft. working capacity double cone blender. Stainless
steel construction. 6' diameter x 1' straight side.32" deep cones,
16" charge port. 8" butterfly discharge valve. 5 HP 3/60/220-440
volt Bull gear drive. On stand. |
|
23776 |
50 |
SS |
USED PATTERSON
KELLEY 50 CUBIC FOOT STAINLESS STEEL TWIN SHELL BLENDER. BLENDER RATED AT
100 POUNDS PER CUBIC FOOT, MOUNTED ON PEDESTALS WITH 7 1/2 HP GEAR HEAD
DRIVE AND BRAKE BUT NO INTENSIFIER BAR. HAS BUTTERFLY VALVE. |
|
23780 |
60 |
SS |
USED
APPROXIMATELY 60 CUBIC FOOT NISSUI STAINLESS STEEL DOUBLE CONE BLENDER. NO
PEDESTAL MOUNTS. LAST INSTALLED IN MEZZANINE ABOVE EXTRUSION LINE. HAS
56" DIAMETER CONE, 29" STRAIGHT SIDE, AND 30" CONE BOTTOM
AND TOP. INCLUDES 8" DIAMETER DISCHARGE AND (1) CONE ABLE TO BE
DETACHED FOR EASY CLEAN OUT. CURRENTLY MOUNTED IN I-BEAM BASE ON LOAD
CELLS WITH OPERATOR CONTROLS. INCLUDES MOTOR. |
|
23779 |
60 |
SS |
USED GEMCO
APPROXIMATELY 60 CUBIC FOOT. WORKING CAPACITY (85 CU FT TOTAL CAPACITY)
STAINLESS STEEL DOUBLE CONE BLENDER. BLENDER SHELL APPROXIMATELY 68"
DIAMETER X 22" STRAIGHT SIDE, 26" DEEP CONE WITH 24" ID
ACCESS PORT WITH BOLTED COVER, 36" DEEP CONE WITH 10" ID OUTLET
. DRIVEN THROUGH A RIGHT ANGLE REDUCER BY A 10 HP 1760 RPM 460V MOTOR.
I-BEAM SUPPORT STANDS. |
|
23778 |
60 |
SS |
One (1) used
approximately 60 cu.ft. working capacity stainless steel cone blender. 6'
diameter. 18" feed port. (No cover) 5" discharge. Gear driven by
10 HP 1760 RPM 3PH/60CYC/220-440 volt motor. Has Foote Brothers 14.0 ratio
125 RPM output gear reducer. |
|
21092 |
69 |
SS |
Used Double
Cone Blender S/S, 69 cu.ft. Working, Mfg. by Buffalo Tank, 304 S/S, Bull
Gear, 5HP Motor, Gear Box, Pillow Block Bearings, No Mounting Frame |
|
23781 |
70 |
CS |
USED GARDNER
MODEL 6'0" CARBON STEEL ASSYMETRIC DOUBLE CONE BLENDER. APPROXIMATELY
2000 LITRE WORKING CAPACITY AND 3000 LITRE TOTAL CAPACITY. MIXING CONE
APPROXIMATELY 1830MM DIAMETER X 455MM STRAIGHT SIDE X 1065MM & 915MM
LONG CONES. DRIVEN BY 7.5HP 415VOLT 3/50 1440RPM MOTOR AND 40:1 GEARBOX
WITH 3:1 PINION. BLENDER SPEED APPROXIMATELY 12 RPM. HAS 455MM DIAMETER
MANWAY AND 200MM DIAMETER OUTLET. |
|
24706 |
75 |
SSS |
One used
Patterson Kelley 75 CF "V" Blender stainless steel on painted
stand (No Bar) |
|
24510 |
100 |
SS |
ONE (1) Used
100 cu. ft. Gemco Double Cone Blender, stainless steel construction, rated
65#/cu. ft. max. material density, 18" feed, 16" discharge with
Gemco Matic Loader/Unloader with Gemco Dust Tight Valve, 7.5 H.P. 230/460
volt XP motor drive, on stands, , New 1989. |
|
24509 |
100 |
SSS |
ONE (1) Used
100 cu. ft. Gemco Double Cone Blender, sanitarystainless steel
construction, rated 60#/cu. ft. maximum material density, high speed
intensifier bar with 50 H.P. 230/460 volt drive, 15 H.P. 230/460 volt
variable speed shell drive, 18" feed, 18" discharge with
pneumatic Gemco Sanitary Valve, on stands with stainless steel shroud. |
|
24508 |
100 |
SS |
ONE (1) Used
Gemco Double Cone Blender, approx. 100 cu. ft. capacity, stainless steel
construction, approx. 7' diameter complete with stands and motor. |
|
23782 |
100 |
SS |
USED
APPROXIMATELY 100 CUBIC FOOT T316 STAINLESS STEEL DOUBLE CONE BLENDER.
APPROXIMATELY 66" DIAMETER X 24" STRAIGHT SIDE, 42" DEEP
CONE ON ONE SIDE 35" DEEP CONE ON OTHER SIDE WITH 18 DIAMETER OPENING
AND CLAMP ON COVER. CARBON STEEL SUPPORT FRAMES 8' HIGH. CHAIN DRIVEN
THROUGH A 70-1 GEAR REDUCER BY A 5HP.3 PHASE, 60 CYCLE, 230-460 VOLT,
1730/TEFC MOTOR. |
|
24511 |
150 |
SS |
ONE (1) Used
150 cu. ft. Gemco Double Cone Blender, stainless steel construction, 150
cu. ft. working capacity, 8' diameter shell, 25 HP shell drive, high speed
intensifierbar driven by 25 H.P. drive, 22" charge port, 16"
discharge with Gemco Flush Valve, on stands with 3' discharge height. |
|
21087 |
|
SS |
PK Liquid
Solids Bar, S/S 24" long |
