|
Item ID |
Category |
Capacity |
Material |
Description |
|
25048 |
Exchanger Plate and Frame |
200 |
316 SS |
Unused ALFA Laval copper brazed plate exchanger. T-316
stainless steel construction. Model 300-66L.
Approximately 200 Sq. feet. (66) plates 14” wide x 38
½” high. Design pressure: maximum 25 bar, minimum 16
bar. Design temperature: maximum 225/225 degrees C,
minimum –160/-160 degrees C. Flange fittings T-316L
Stainless. . Built 2001. Volume: 18.56/23.10 liters. |
|
25049 |
Exchanger Plate and Frame |
200 |
316 SS |
Unused ALFA Laval copper brazed plate exchanger. T-316
stainless steel construction. Model 300-66L.
Approximately 200 Sq. feet. (66) plates 14” wide x 38
½” high. Design pressure: maximum 25 bar, minimum 16
bar. Design temperature: maximum 225/225 degrees C,
minimum –160/-160 degrees C. Flange fittings T-316L
Stainless. S/N #5395513. Built 2001. Volume:
18.56/23.10 liters. |
|
25050 |
Exchanger Plate and Frame |
200 |
316 SS |
Unused ALFA Laval copper brazed plate exchanger. T-316
stainless steel construction. Model 300-66L.
Approximately 200 Sq. feet. (66) plates 14” wide x 38
½” high. Design pressure: maximum 25 bar, minimum 16
bar. Design temperature: maximum 225/225 degrees C,
minimum –160/-160 degrees C. Flange fittings T-316L
Stainless. Built 2001. Volume: 18.56/23.10 liters. |
|
25051 |
Exchanger Plate and Frame |
200 |
316 SS |
Unused ALFA Laval copper brazed plate exchanger. T-316
stainless steel construction. Model 300-66L.
Approximately 200 Sq. feet. (66) plates 14” wide x 38
½” high. Design pressure: maximum 25 bar, minimum 16
bar. Design temperature: maximum 225/225 degrees C,
minimum –160/-160 degrees C. Flange fittings T-316L
Stainless. Built 2001. Volume: 18.56/23.10 liters. |
|
25052 |
Exchanger Plate and Frame |
200 |
316 SS |
Unused ALFA Laval copper brazed plate exchanger. T-316
stainless steel construction. Model 300-66L.
Approximately 200 Sq. feet. (66) plates 14” wide x 38
½” high. Design pressure: maximum 25 bar, minimum 16
bar. Design temperature: maximum 225/225 degrees C,
minimum –160/-160 degrees C. Flange fittings T-316L
Stainless. Built 2001. Volume: 18.56/23.10 liters. |
|
25053 |
Exchanger Plate and Frame |
600 |
316 SS |
Unused ALFA Laval copper brazed plate exchanger. T-316
stainless steel construction. Model CB-300-198L.
Approximately 600 sq. feet. (198) plates 14” wide x 38
½” high. Design pressure: max 25 bar, min 16 bar.
Design temperature: max 225/225 degrees C, min -160/-160
degrees C. Volume: 58.84/69.30 liters. T-316L
stainless flanges. Built 2001. |
|
25136 |
Exchanger Tube and Shell |
8 |
316L SS |
Used Rubicon Ind. approximately 8 sq. ft. horizontal
heat exchanger. 4 1/2" diameter x 8' long T-304
stainless shell. 9" diameter T-316L stainless tube
sheets. 9" diameter T-316L Stainless steel billet
heads. (12) 5/8" x 16 GA T-316L stainless tubes. Shell
side rated 150 PSI @ 300 degrees F. Tube side rated
50/FV @ 300 degrees F. Mounted on two T-304 stainless
supports. |
|
25135 |
Exchanger Tube and Shell |
15 |
304 SS |
Used Rubicon Ind. approximately 15 sq. ft. horizontal
heat exchanger. 4 1/2" diameter x 8' long T-304
stainless shell. 9" diameter T-316L stainless tube
sheets. 9" diameter T-316L Stainless steel billet
heads. (12) 5/8" x 16 GA T-316L stainless tubes. Shell
side rated 150 PSI @ 300 degrees F. Tube side rated
50/FV @ 300 degrees F. Mounted on short T-304 stainless
saddles. |
