PRINCETON

Phone: +1 (610) 336-7538

INDUSTRIAL SOLUTIONS

Email: sales@princetoninternational.com

 Home  |  New Equipment  |  Used Equipment  |  Plant Liquidations  |  Contact Us

Pumps

• Pump

  • Category	Item ID	Capacity	Material	Description
    Pump	21253			Used Diffusion Pump, Mfg. by Edwards, Steel Stand Leybold-Heaeus Sanitary, 17" Overall x 5" wide
    Pump	22963			PUMP, IMPELLER: 11 1/2, SIZE: 2X3 DR, SHAFT DIA : 178 CCMS 10.92
    Pump	22964			PUMP, IMPELLER: 11 1/2, SIZE: 2X3 CID, SHAFT DIA : 178 10.93
    Pump	22965			PUMP, ALLOY: D20, SEAL: DURA DB1, SEAL CODE: E4/25-TT-H CAP: 20GPM,  RPM: 1800, PO: 011022, TYPE: RO, TDH: 108 PT
    Pump	22969			C-1 TRANSFER PUMP
    Pump	22972			PUMP, TYPE: 23M-CU-XXBX-XXLC
    Pump	22976			SUNDSTRAND PUMP FOR C-3
    Pump	22977			PUMP, TYPE: A-94, KETEMA POWER PACK, M32487
    Pump	22979			SUNDSTRAND PUMP FOR C-4
    Pump	22980			HASTELLOY C, 40 GPM 90' TDH VERT IN LINE, 2" SUCT x 1.5" DISC, IMPELLER 4-3/8", ALLOY: D4, TYPE: 2215, 3600 RPM, 05/97, SEAL: CRANE, SEAL ASSEMBLY, CARTRIDGE 5625P X510581X510581 1.1/TYPE 5625P, SIZE 1.125, DRAWING #HSP-37377
    Pump	22981			PUMP, 2" SUCT x 1.5" DISC, HASTELLOY C, 40 GPM 90' TDH VERT IN LINE, IMPELLER 4-3/8", ALLOY: D4, 3600 RPM, 05/97, P.O. #12662-P-020, SERIAL NO. 439357, SEAL:  DOUBLE DRY RUNNING NON-CONTACTING CARTRIDGE, SIZE 1.125
    Pump	22982			DI, 1500 GPM 85 FT TDH, HORIZONTAL GOULDS
    Pump	22983			DELETED
    Pump	22984			SCOTT PUMP FOR EVAP. COND. (FEED)
    Pump	22985			SCOT BRINE COMPRESSOR PUMP FOR CH-1
    Pump	22986			SCOT BRINE COMPRESSOR PUMP FOR CH-1
    Pump	22987			PUMP, GEAR TYPE, 50 GPM, 1200 RPM
    Pump	22988			PUMP, SIZE 6X8X13, DUCTILE IRON, 1500 GPM, 1800 RPM, 85 FT HD
    Pump	22989			PUMP, SIZE 6X8X13, DUCTILE IRON, 1500 GPM, 1800 RPM, 85 FT HD
    Pump	22990			PUMP, 2"X1-1/2", CAT. #10-15506-100061, STOCK #1321
    Pump	22991			PUMP, GOULDS, ANSI, MOD. # 3196 MTX, SIZE - 4x6-13 SN. 778E879.1, MAT'L. - DI, IMP. DIA. - 11.9, MECH. SEAL - J. CRANE 5611Q, SINGLE, EXT'L. FLUSHING
    Pump	22992			PIMP, GOULDS, ANSI, MOD. # 3196 MTX, SIZE - 4x6-13, SN.-778E879.2, MAT'L.- DI, IMP.DIA. 11.9, MECH. SEAL - J. CRANE 5611Q, SINGLE, EXT'L FLUSHING
    Pump	22993			PUMP, PACO, 2" X 1-1/2", CAT.# 10-15506-100061, STOCK #1321, SER. #XJ94D04651, IMPELLER 3", BALDOR MOTOR, CAT. #JM3107, SPEC. #34F38-2718, FRAME 56J, SER. W2-94, 208-230/460 VOLTS, 2.5-2.4/1.2 AMPS, 3450 RPM
    Pump	22994			PUMP, 4" X 3", 5.25" IMPELLER DIAMETER, 1750 RPM, 3/60/208-230/460 VOLTS
    Pump	22995			PUMP, 1-1/2" X 1-1/2"
    Pump	22996			DI, 1500 GPM 85 ft TDH, HORIZONTAL GOULDS
    Pump	22997			DI WATER PUMP, 1K1.5X1-62/62, CDUM ALLOY
    Pump	22998			PUMP, RECESSED IMPELLER 2K2X2R-10/92, 75 GPM, 317' TDH, CD4M ALLOY, CRANE SEAL, M1X51X058/F31015 SEAL CODE, 3600 RPM, 2215 TYPE,
    Pump	22999			HEAT FILTRATION PUMP, TAG: P1-RV06, SIZE: 2K2X2R - 10/100, ALLOY: CD4M, SEAL: DURA, SEAL CODE: IR21F/VP/V, CAP: 105, RPM: 1800, P.O.: 021110, TYPE: X200, TDH: 98 FT., AH: 11/98
    Pump	23000			BUSCH COBRA DRY C-200 80 ACFM 7.5 MM Hg
    Pump	23001			BRINE PUMP (ATOP BUILDING ‘H’ NEAR RV-16)
    Pump	23002			GOULD C.T. PUMP FOR HOLDING TANK
    Pump	23003			INDUSTRIAL STEAM WATER HEATER STORAGE TANK PUMP 1
    Pump	23004			INDUSTRIAL STEAM WATER HEATER STORAGE TANK PUMP 2
    Pump	23005			PUMP , 316SS, 2K2X1LF - 10/82 OP, ALLOY: D4, SEAL: DURA, SEAL CODE: K/ER/DR2KFP/VP/V, CAP: 15 GPM,  RPM: 1800, TYPE: P-200, TDH: 91FT, P.O. #02-S114-05-P01-0033, D/Y: 11/98
    Pump	23012			INLINE PUMP (PORTABLE)
    Pump	23013			INLINE PUMP (PORTABLE)
    Pump	23014			INLINE PUMP @ PLAT. (PORTABLE)
    Pump	23015			INLINE PUMP @ PLAT. (PORTABLE)
    Pump	23016			INLINE PUMP @ PLAT. (PORTABLE)
    Pump	23022			2K3X2-13RV, 200 GPM @ 155 FT. TDH,  316 SS, P200 TYPE, K/E U/DR 2KFVV SEAL CODE, 1800 RPM,FLOWSERVE CARTRIDGE B/M #122158
    Pump	23023			PUMP, 2K4X3-13RV/114, D4 ALLOY, DURA DBL SEAL, E75--VV SEAL CODE, 600 GPM, 12.375" IMPELLER, 98 FT, DOUBLE MECH SEAL,  1800 RPM, 316 SS, PO#1001502
    Pump	23024			PUMP, TRANSFER,  TEFLON LINEFD, FLOWSERVE MODEL NO: GROUP II, POLYCHEM SANSI, PS3X2-10/9.875, 105 GPM,  MDP: 250, MAT'L: DIPA.WMP34952AA, RECESSED IMPELLER (DOUBLE MECH. SEAL, TYPE - CARTRIDGE, POLYCHEM, TYPE - PL200, PART CODE 389333, PART DESC. 2/DBL IN
    Pump	23025			PUMP, 2K2X1LF-10/90P, D20 ALLOY, DURA DBL SEAL, E4/75-TT-H SEAL CODE, 20 GPM, 1800 RPM, RO TYPE, 108 FT TDH, PO#1000930
    Pump	23026			316 SS JOHN CRANE SEAL PUMP, LMA-1933-901, 1.5 GPM, PO#1001101
    Pump	23027			PUMP, TRANSFER, RECESSED IMPELLER, 2"x2"R6", 2K2X2R-10/100, SEAL - DURA, SEAL CODE - IR12F/VP/Y, 105 GPM @ 98 FT. TDH,  1800 RPM, ALLOY -D20, P.O. 1001107, TYPE - X200
    Pump	23028			PUMP, TRANSFER, FLOWSERVE MODEL NO: GROUP II, POLYCHEM SANSI, PS3X2-10/9.875, 105 GPM @ 98 FT TDH,  MDP: 250, MAT'L: DIPA.WMP34952AA, RECESSED IMPELLER (DOUBLE MECH. SEAL, TYPE - CARTRIDGE, POLYCHEM, TYPE - PL200, PART CODE 389333, PART DESC. 2/DBL INS/OU
    Pump	23029			PUMP, TRANSFER , 2K3X2-13RV, 200 GPM @ 155 FT. TDH,  DCI ALLOY, P200 TYPE, K/E U/DR 2KFVV SEAL CODE, 1800 RPM 25 HP MOTOR, RECESSED IMPELLER, FLOWSERVE CARTRIDGE B/M #122158
    Pump	23030			PUMP, TRANSFER , 2K2X2R-10/100, 105 GPM @ 98 FT. TDH,  DC3 ALLOY, DURA SEAL, I/CX4/R2IFP/VP/Y SEAL CODE, 1800 RPM, X200 TYPE, RECESSED IMPELLER 120' 2"x2"R6"
    Pump	23031			PUMP, TRANSFER , 2K2X2R-10/100, RECESSED IMPELLER 120' 2"x2"R6", 105 GPM @ 98 FT. TDH,  DC3 ALLOY, DURA SEAL, SEAL CODE - I/CX4/R2/FP/VP/Y, 1800 RPM, TYPE - X200, P.O. NO.: 02-S114-05-P01-0033
    Pump	23032			PUMP, TRANSFER , 2K2X1LF-10/90P, 20 GPM @ 98 FT. TDH,  316 SS , 5 HP., DURA SEAL, E4/75--TT-H SEAL CODE, 1800 RPM, RO TYPE, RECESSED IMPELLER 108' 2"x2"R6", PO#1000930, 1-7/8" DIA. SHAFT, SERIAL NO. 463755
    Pump	23033			PUMP, BATCH STILL, 2K6X4-13A/124 RV, D4 ALLOY, DURA SEAL, 1/CR2EFHH SEAL CODE, 500 GPM, 1200 RPM, X200 TYPE, 68 TDH
    Pump	23034			PUMP, BRINE CIRCULATION, 1K1.5X1-82/47RV, D4 ALLOY BASE 139, DURA SEAL TYPE CRO, CAP. 50 GPM @ TDH 88, 3600 RPM, P.O. NO. 12662--P-020, MECHANICAL SEAL CARTIDGE: 1.375" SEAL SIZE, DOUBLE INSIDE CRO, 316 SS SPRING, TUNGSTEN CARBIDE SEAL RING, NO. 5 CARBON
    Pump	23035			PUMP, DISTILLATE, 50 GPM, 88 ft TDH, 316 SS 1.5"x1"x4 3/4" , BATCH STILL DISTILLATE PUMP SIZE;1K1.5X1-82/47RV, ALLOY:D4, SEAL:DURA, TYPE:CRO. SEAL CODE:E75EFP/V  CAP:50, RPM:3600, PO:12662-P-020
    Pump	23036			PUMP, VACUUM, DRY C-200 , CAP: 70 CFM @ 1.522" HG PRESSURE
    Pump	23037			C.T. PUMP (CHEMICAL INJECTION/SAND FILTER)
    Pump	23038			C.T. PUMP (CHEMICAL INJECTION/SAND FILTER)
    Pump	23039			SUMP PUMP, IMPELLER DIA.: STD., 3" INLET, 3" OUTLET
    Pump	23040			SUMP PUMP, IMPELLER DIA.: STD., 3" INLET, 3" OUTLET
    Pump	23041			SUMP PUMP, IMPELLER DIA.: STD.,  INLET, OUTLET
    Pump	23042			SUMP PUMP, IMPELLER DIA.: STD., 4" INLET, 3" OUTLET, LIQUID HANDLING ORDER #1022510
    Pump	23043			SUMP PUMP, SIZE:2K2X1.5US-10A/82, ALLOY: D4, SEAL, DURA, SEAL CODE: K/ER/DR2KDPYPV, CAP.: 10 GPM, RPM: 1800, TYPE: P-200, TDH: 57 FT., D/Y: 12/98
    Pump	23044			PUMP , 1K1.5US - 82/76, ALLOY: D4, SEAL: DURA, SEAL CODE: K/ER/RD2KFPVPV, CAP: 15 GPM,  RPM: 1800, TYPE: P-200, TDH: 91FT, P.O. #02-S114-05-P01-0033, D/Y: 12/98
    Pump	23047			RECIRC. PUMP, SIZE: 1" X 1-1/2" , MODEL #3196, IMPELLLER SIZE 4-3/4",  ALLOY: CS/DI, SEAL: MECH. SEAL, SINGLE MECH., JOHN CRANE I.D. HSP21400-2
    Pump	23048			PUMP, SIZE: 1K1.5X1LF-82/64 OP, ALLOY: D4, SEAL: DURA, SEAL CODE: E75--P/V, CAP.: 10 GPM (38 LPM), RPM: 1800, TYPE: CRO, TDH: 55 FT, 316SS, DOUBLE MECHANICAL SEAL, 5-1/8" IMPELLER
    Pump	23049			PUMP, SIZE: 1K1.5X1LF-82/64 OP, ALLOY: D4, SEAL: DURA, SEAL CODE: E75--P/V, CAP.: 10 GPM (38 LPM), RPM: 1800, TYPE: CRO, TDH: 31 FT, 316SS, DOUBLE MECHANICAL SEAL, 5-1/8" IMPELLER, FLOWSERVE CSCPP1375FACPS
    Pump	23053			TANK, SOLVENTS, 10000 GAL
    Pump	23054			BLACKMER TRANSFER PUMP, RPM: 1725, VOLTS: 230/460, AMPS:13/6.5  FOR TK-04
    Pump	23055			GORMAN-RUPP WATER PUMP FOR TK-12,16,57
    Pump	23056			TRANSFER PUMP, 1.5"x 1", 316 SS ANSI CENTRIFUGAL 1K1.5X1 82/56 RV, ALLOY: D4, SEAL: DURA, SEAL CODE: E75-P/VP/V, 75 GPM, RPM: 3600, TYPE: CRO, TDH: 134 FT., P.O. #12662-P-020
    Pump	23057			PUMP, 2" INLET/OUTLET, 60 GPM, CARBON STEEL, GMA RATING 5.6 HP, MFG. CODE 7/91, I/D 41A1, FACTORY SET @ 51-75 PSI
    Pump	23058			PUMP, 2" INLET/OUTLET, 60 GPM, CARBON STEEL, GXS2, ID #41B1
    Pump	23059			PUMP, 2" INLET/OUTLET, 60 GPM, CARBON STEEL, GMA RATING 4.3 HP, MFG. CODE 1/91, ID #41B-1
    Pump	23060			PUMP, 2" INLET & OUTLET, CARBON STEEL, 60 GPM
    Pump	23061			PUMP, RPM: 1735, VOLTS; 230/460, AMPS: 8.6/4.3 SOLVENT PUMP FOR TK-35/36
    Pump	23062			PUMP, FLOWSERVE MODEL NO. MARK III (DUAL CARTRIDGE MECHANICAL SEAL-FLOWSERVE #CSCPP1375ECCBS) 1800 RPM, 8.2" IMPELLER, 1K1.5X1-82/78 RV, 59 FT. HEAD, 60 GPM FLOW, 316 SS MATERIAL, GEAR RATIO = 3.32, SERIAL NO. 478013, P.O. #1003746
    Pump	23063			TRANSFER PUMP FOR CYCLOHEXANE
    Pump	23064			PUMP, VIKING RPM: 1160, VOLTS: 208-230/460, AMPS: 11-15.8/7.9
    Pump	23065			WEST SUMP PUMP 1-1/2" X1-1/2", 316 SS
    Pump	23066			PUMP, WASTE WATER, FOR TK-63, SIZE:  2X1.5, ALLOY: CD4M, SEAL: MECHANICAL, TYPE: L, CAP: 100 GPM, TDH: 180 FT. HD.
    Pump	23067			WASTE WATER PUMP FOR TK-64, SIZE: 2K4X3, ALLOY: CD4M, SEAL: DOUBLE MECHANICAL
    Pump	23072			PUMP, 600 GPM 60 ft 5"x4"x10 IRON
    Pump	23073			BRINE PUMP, 2", NO. 8408, TYPE H, 1-7/8" SHAFT, 250 GPM, FT. HD 200
    Pump	23074			PUMP, KIRST, 2-1/2" X 3", TYPE L, 350 GPM, FT. HD. - 120', NO. 6203, 6-5/8" IMPELLER
    Pump	23075			PUMP AND FILTER, AUTOMATIC SELF CLEANING WATER FILTER, 50 GPM, 3 HP. SINGLE PHASE, 110/200 VAC, 50/60 HZ, CLOSED COUPLED SST PUMP AND FILTER CONTROLLER GB6 110 VAC
    Pump	23076			KIRST COOLING WATER PUMP FOR TK-74
    Pump	23077		D4 Alloy	TRANSFER PUMP, 2K3X2-13/114 RV, D4 ALLOY, DURA SEAL, CSCPX1875ECPS SEAL CODE, 140 GPM @ 180 FT TDH, 25 HP 1800 RPM, TYPE ISC
    Pump	23078		D4 Alloy	TRANSFER PUMP, 2K3X2-13/114 RV, D4 ALLOY, DURA SEAL, CSCPX1875ECPS SEAL CODE, 140 GPM @ 180 FT TDH, 25 HP 1800 RPM, TYPE ISC
    Pump	23079		316	PUMP, CENTRIF., 316 SS, DOUBLE MECHANICAL, 150 GPM, TDH: 64', 3"x2"x4.5" REV VANE, 3600 RPM, TYPE: CRO, MECHANICAL SEAL COMPONENTS: 1.375" SEAL SIZE, DOUBLE INSIDE CRO, 316 SS SPRING, TUNGSTEN CARBIDE SEAL RING, NO. 5 CARBON INSERT, KALREZ INNER SHAFT PAC
    Pump	23080		PP	PUMP, DOUBLE DIAPHRAGM, PP, TEFLON 10 GPM 21PSID, SIZE: M2, TDH: 42 FT, PNEUMATIC OPERATION
    Pump	23081		316	PUMP, CENTRIF., 316 SS, DOUBLE MECHANICAL, 150 GPM, TDH: 64', 3"x2"x4.5" REV VANE, 3600 RPM, TYPE: CRO, MECHANICAL SEAL COMPONENTS: 1.375" SEAL SIZE, DOUBLE INSIDE CRO, 316 SS SPRING, TUNGSTEN CARBIDE SEAL RING, NO. 5 CARBON INSERT, KALREZ INNER SHAFT PAC
    Pump	23082		316	PUMP, CENTRIF., 316 SS, DOUBLE MECHANICAL, 150 GPM, TDH: 64', 3"x2"x4.5" REV VANE, 3600 RPM, TYPE: CRO, MECHANICAL SEAL COMPONENTS: 1.375" SEAL SIZE, DOUBLE INSIDE CRO, 316 SS SPRING, TUNGSTEN CARBIDE SEAL RING, NO. 5 CARBON INSERT, KALREZ INNER SHAFT PAC
    Pump	23094			OIL PUMPS, (2) 750 WATT HEATERS
    Pump	23095			MAGNETEK PUMP FOR EVAP. COND. (DISCHARGE)
    Pump	23096			GOULD C.T. PUMP (INSIDE BUILDING ‘H’)
    Pump	23098			PULSAFEEDER PULSATRON SERIES E PLUS, MODEL #LPB2SA-PTC1-500, 5 GPD (.79 LPH) 250 PSI (17 BAR) MAX., 115 VAC, 50/60 HZ, .6 AMPS, 1 PH., KOPKIT #K2PTC1
    Pump	23099			PULSAFEEDER PULSATRON SERIES E PLUS, MODEL #LPB2SA-PTC1-500, 5 GPD (.79 LPH) 250 PSI (17 BAR) MAX., 115 VAC, 50/60 HZ, .6 AMPS, 1 PH., KOPKIT #K2PTC1
    Pump	23100			PULSAFEEDER PULSATRON SERIES E PLUS, MODEL #LPB2SA-PTC1-500, 5 GPD (.79 LPH) 250 PSI (17 BAR) MAX., 115 VAC, 50/60 HZ, .6 AMPS, 1 PH., KOPKIT #K2PTC1
    Pump	23101			PULSAFEEDER PULSATRON SERIES E PLUS, MODEL #LPB2SA-PTC1-500, 5 GPD (.79 LPH) 250 PSI (17 BAR) MAX., 115 VAC, 50/60 HZ, .6 AMPS, 1 PH., KOPKIT #K2PTC1
    Pump	23102			PULSAFEEDER PULSATRON SERIES E PLUS, MODEL #LPK2SA-PTC1-500, 3 GPD (.45 LPH) 300 PSI (20 BAR) MAX, 115 VAC, 50/60 HZ, .6 AMPS, 1 PH., KOPKIT #K2PTC1
    Pump	23104			PUMP, SCOTT PUMP, SPECIFICATION NO. 3095K052, MODEL NO. 57 E SF, CLOSE COUPLED TO A 2 HP, 1750 RPM, 3 PHASE, ODP MOTOR, 5.25" IMPELLER, 208-230/460V
    Pump	22863	0		MOTOR, 208-230/460 VOLTS, 2.5-2.4/1.2 AMPS, 3450 RPM, SPEC. 34F38-2718
    Pump	23344	0		Used Moyno Pumps
    Pump	22865	8		MOTOR, LINCOLN, 230/460V, 20.4/10.2 AMPS, 1745 RPM, FRAME 213T, NEMA CODE H, TF-4282, SERIAL NO. 3597523, 7.5 HP.
    Pump	22864	30		MOTOR, GE, MODEL #5KS2868D2058, 1765 RPM, 230/460 VOLTS, 72.0/36.0 AMPS, FRAME - 286T, 30 HP.
    Pump	20530	50		UNUSED Process pump. Mfd. By Goulds. 50 GPM, Teflon, Size 1 1/2 x 3 x 7 Model 3198, 49' Head, Temp. 225F, 3HP 1750 RPM, 7"Impeller
    Pump	20531	50		UNUSED Process pump. Mfd. By Goulds. 50 GPM, Teflon, Size 1 1/2 x 3 x 7 Model 3198, 49' Head, Temp. 225F, 3HP 1750 RPM, 7"Impeller
    Pump	20532	50		UNUSED Process pump. Mfd. By Goulds. 50 GPM, Teflon, Size 1 1/2 x 3 x 7 Model 3198, 49' Head, Temp. 225F, 3HP 1750 RPM, 7"Impeller
    Pump	23332	80		Dowtherm Oil Pump MFR-DEAN BROS. 80 GPM 100'HEAD 3500 RPM Thrust Bearing 7309 BG Radial Bearing 6309 7 ½ HP Condition-UNUSED
    Pump	23330	160		Dowtherm Oil Pump MFR-DEAN BROS. Mod. R434 160 GPM 200' HEAD 3500 RPM Thrust Bearing 7309BG Radial Bearing 6309 20 HP Size-2 x 3 x 81/2
    Pump	23331	160		Dowtherm Oil Pump MFR-DEAN BROS Mod. R434 Ser. No. 160 GPM 200' HEAD 3500 RPM Thrust Bearing 7309BG Radial Bearing 6309 20 HP Size 2 x 3 x 8 ½ Condition UNUSED

• Centrifugal Pump

  • Category	Item ID	Capacity	Material	Description
    Pump/Centrifugal	22968			PUMP, CENTRIFUGAL, 1.5" X 1", FLOWSERVE MODEL NO. MARK III POLYCHEM S, 1750 RPM, 40 GPM, (MECH. SEAL: POLYCHEM DBL. INT. TYPE PL -200, ROTATING SEAL- SIL. CARB., STATIONARY SEAL - CARBON, KAREZ INBOARD O-RINGS, VITON OUTBOARD O-RINGS, NON-METALIC GLAND, P
    Pump/Centrifugal	23006			CENTRIFUGAL PUMP (PORTABLE  SKID MOUNT) TEFLON LINED HEAD, 3" X 1.5"
    Pump/Centrifugal	23007			CENTRIFUGAL PUMP (PORTABLE  SKID MOUNT)
    Pump/Centrifugal	23008			CENTRIFUGAL PUMP (PORTABLE  SKID MOUNT)
    Pump/Centrifugal	23009			CENTRIFUGAL PUMP (PORTABLE  SKID MOUNT)
    Pump/Centrifugal	23010			CENTRIFUGAL PUMP (PORTABLE  SKID MOUNT)
    Pump/Centrifugal	23011			CENTRIFUGAL PUMP (PORTABLE  SKID MOUNT)
    Pump/Centrifugal	23017			CENTRIFUGAL PUMP (PORTABLE  SKID MOUNT) FRAME SIZE - 96STP; MFG DATE - 7/94; BEARING - (IB) 6207, (OB) 5306; LUBE TYPE - OIL, MOTOR: TOTALLY ENCLOSED, 3 PHASE, 60HZ, 230/460V, 51.0/25.5 AMPS, 3500 RPM, FRAME 256T, BEARINGS 6309-JC3 & 6207-JC3, ASSEMBLED B
    Pump/Centrifugal	23018			CENTRIFUGAL PUMP (PORTABLE  SKID MOUNT) FRAME SIZE - 96STP; MFG DATE - 7/94; BEARING - (IB) 6207, (OB) 5306; LUBE TYPE - OIL, MOTOR: TOTALLY ENCLOSED, 3 PHASE, 60HZ, 230/460V, 51.0/25.5 AMPS, 3500 RPM, FRAME 256T, BEARINGS 6309-JC3 & 6207-JC3, I.D.# 7508-
    Pump/Centrifugal	23019			CENTRIFUGAL PUMP, DURCO MARK III RECESSED PUMP, 2K2X2R-10/10
    Pump/Centrifugal	23020			CENTRIFUGAL PUMP (PORTABLE  SKID MOUNT) FRAME SIZE - MTP; MFG DATE - 10/96; BEARING - 6309; REF. NO. - 5309; LUBE TYPE - OIL, MOTOR: TOTALLY ENCLOSED, 3 PHASE, 60HZ, 230/460V, 51.0/25.5 AMPS, 3500 RPM, FRAME 256T, BEARINGS 6309-JC3 & 6207-JC3, I.D.# 7508-
    Pump/Centrifugal	23021			PUMP, TRANSFER, 2K2X2R-10/100, DC3 ALLOY, DURA X200 SEAL I/CX4/R2IFP/VP/Y SEAL CODE, 105 GPM, 98 TDH, 1800 RPM, 20 HP
    Pump/Centrifugal	22948	20		CENTRIFUGAL, 20 GPM @ 105 FT, 2" X 1", 5 HP, 1800 RPM, D20
    Pump/Centrifugal	23110	20	316	CENTRIFUGAL, 20 GPM @ 45 FT, 1 HP, 1800 RPM, 316 SS
    Pump/Centrifugal	23107	80	316	CENTRIFUGAL, 80 GPM @ 50 FT, 316 SS, 2 HP, 1800 RPM
    Pump/Centrifugal	23108	80	316	CENTRIFUGAL, 80 GPM @ 50 FT, 316 SS, 2 HP, 1800 RPM
    Pump/Centrifugal	23109	80	316	CENTRIFUGAL, 80 GPM @ 30 FT, 316 SS, 4 HP, 1800 RPM
    Pump/Centrifugal	23111	110	D20	CENTRIFUGAL, 110 GPM @ 60 FT, 4 HP, 1800 RPM, D20
    Pump/Centrifugal	23105	150	316	CENTRIFUGAL, 150 GPM @ 60 FT, 5 HP, 1800 RPM, 316 SS
    Pump/Centrifugal	23106	150	316	CENTRIFUGAL, 150 GPM @ 60 FT, 5 HP, 1800 RPM, 316 SS
    Pump/Centrifugal	23112	150	316	CENTRIFUGAL, 150 GPM @ 60 FT, 4 HP, 1800 RPM, 316 SS
    Pump/Centrifugal	22949	300		FRP CENTRIFUGAL, 300 GPM @ 100 FT
    Pump/Centrifugal	22950	300		FRP CENTRIFUGAL, 300 GPM @ 100 FT

• Diaphragm Pump

  • Category	Item ID	Capacity	Material	Description
    Pump/Diaphragm	22951			DIAPHRAGM PUMP, PORTABLE, 1-1/2", TYPE: SGN-5-SS
    Pump/Diaphragm	22952			DIAPHRAGM PUMP, PORTABLE, 1-1/2", TYPE: SGN-5-SS
    Pump/Diaphragm	22953			DIAPHRAGM PUMP, PORTABLE, 1-1/2", TYPE: SGN-5-SS-S
    Pump/Diaphragm	22954			DIAPHRAGM PUMP, PORTABLE, 2", TYPE: TGN-1-S
    Pump/Diaphragm	22955			DIAPHRAGM PUMP,  SAND PIPER 2, S METALLIC SERIES, BALL VALVE, 1-1/2" INLET & OUTLET, 106 GPM @ 125 PSIG, MODEL S15 METALLIC #S15B1SGTANS100, SERIAL NO. 743478, DATE JULY25, 2001, WARREN - RUPP
    Pump/Diaphragm	22956			DIAPHRAGM PUMP PORTABLE, 1-1/2", TYPE: SGN-4-SS
    Pump/Diaphragm	22957			DIAPHRAGM PUMP, PORTABLE, 1-1/2", TYPE: SGN-4-SS
    Pump/Diaphragm	22958			DIAPHRAGM PUMP, PORTABLE, 1-1/2", TYPE: SGN-4-SS
    Pump/Diaphragm	22959			DIAPHRAGM PUMP PORTABLE, 2", TYPE: TGN-1-S
    Pump/Diaphragm	22960			DIAPHRAGM PUMP, PORTABLE, (ACID) 1-1/2", TYPE: TGV-2-PP
    Pump/Diaphragm	22961			DIAPHRAGM PUMP, PORTABLE, 1-1/2", TYPE: SGN-6-SS
    Pump/Diaphragm	22962			DIAPHRAGM PUMP, PORTABLE, 1-1/2", TYPE: SGN-6-SS
    Pump/Diaphragm	22966			Wilden air diaphragm pump, model P2/KPPP/TF/TF/KTV/400, PO#1001276
    Pump/Diaphragm	22967			DIAPHRAGM PUMP, PORTABLE, 1-1/2", TYPE: SGN-6-SS
    Pump/Diaphragm	22970			DIAPHRAM PUMP
    Pump/Diaphragm	22971			DIAPHRAGM PUMP, PORTABLE, 2", TYPE: TGN-1-S1
    Pump/Diaphragm	22973			PUMP, DIAPHRAGM , WARREN - RUPP FOR C-2 Ml POT
    Pump/Diaphragm	22974			DIAPHRAGM PUMP, PORTABLE, 2", TYPE: TGN-1-S
    Pump/Diaphragm	22975			WARREN - RUPP DIAPHRAGM PUMP FOR C-3 Ml POT
    Pump/Diaphragm	22978			WARREN - RUPP DIAPHRAGM PUMP FOR C-4 Ml POT

• Fire Pump

  • Category	Item ID	Capacity	Material	Description
    Pump/Fire	23097			ITT A-C PUMP, 10X8X17F, TYPE 8100, 2000 GPM, 80 PSI, 1785 RPM, 14.600in IMPELLER DIA., MAX NET PRESS 94 PSI,NET PRESS @ 150% CAP = 61 PSI, MAX POS SUCTION P=88 PSI
    Pump/Fire	23103			IBPS-40, 40 GPM @ 200 PSI, MAXIMUM - 3% SOLUTION FLOW 1320 GPM, 10 HP, PIPING SIZE 1 1/2"

• Vacuum Pump

  • Category	Item ID	Capacity	Material	Description
    Pump/Vacuum	22724			COOLING TOWER FOR VACUUM PUMPS
    Pump/Vacuum	23046			NASH TC-05 VACUUM PUMP
    Pump/Vacuum	23050			VACUUM PUMP, TYPE: DRY SCREW, FLOW: 97ACFW @ 10MM HGA,  CS W/PTFE MOS2 COATING
    Pump/Vacuum	23051			BUSCH COBRA DRY C-200 95 ACFM 10 MM HGW/ XP1-TD02
    Pump/Vacuum	23052			VACUUM PUMP PACKAGE SYSTEM
    Pump/Vacuum	23083			NASH VACUUM PUMP, SIZE: AT184 , RPM 1170
    Pump/Vacuum	23084			NASH VACUUM PUMP, SIZE: AT184 , RPM 1170
    Pump/Vacuum	23085			NASH VACUUM PUMP, SIZE: TC-5  , RPM 980
    Pump/Vacuum	23086			NASH VACUUM PUMP, SIZE: AT184 , RPM 1170
    Pump/Vacuum	23087			NASH VACUUM PUMP, SIZE: AT184 , RPM 1170
    Pump/Vacuum	23088			NASH VACUUM PUMP, SIZE: TCM-3, RPM 1750
    Pump/Vacuum	23089			NASH VACUUM PUMP, SIZE: TCM-3, RPM 1750
    Pump/Vacuum	23090			NASH VACUUM PUMP, SIZE: TCM-3, RPM 1750
    Pump/Vacuum	23091			NASH VACUUM PUMP, SIZE: TCM-3, RPM 1750, DUCTILE IRON
    Pump/Vacuum	23092			NASH AT184 VACUUM PUMP TC-05, RPM 1171
    Pump/Vacuum	23093			BUSCH HUCKPACK TWO VACCUM PUMP (KSAC) HP 437
    Pump/Vacuum	20528	124		124 CFM, 15 HP Vacuum Pump, 1750 RPM. Mod 7-DC
    Pump/Vacuum	20529	124		124 CFM, 15 HP Vacuum Pump, 1750 RPM. Mod 7-DC