SS Reactors up to 499 Gal. |
  |
|
Item
No: |
Capacity |
Material |
Description: |
|
22080 |
2 |
316 SS |
Approx
2 gal 316SS reactor/autoclave. 8" dia x 20" long. Mfd by
Autoclave Engrs, SN 14508. Rated 5000 psi (7500 test). Electric heating
mantle. Belt driven by approx 1 HP motor. Mtd on stand. |
|
20533 |
2 |
SS |
One 2 Liter Lab Pressure Reactor. SS. |
|
22081 |
8 |
316 SS |
8
gal 316SS vert jkt autoclave system. 10" dia x 24" str side,
flat top and btm. Mfd by Dusenbury Eng Co Inc, SN 536A, blt 1990. Rated
125 psig and full vac @ -20 deg F to 350 deg F. Packaged system w/(5) 1/4
HP FMI lab pumps, Mdl Q; (1) 2 HP, 1x1 centrifugal pump; Rosemount oxygen
analyzer; digital controls. |
|
22082 |
10 |
304L SS |
10
gal 304LSS vert jkt agit reactor. 16" dia x 24" cone, flat bolt
top, 24" cone btm. Mfd by Atlantic Research Helicone, Mdl
Helicone-10CV, SN 380, NB #960 (jkt only). Int rated 50 psi @ 600 deg F,
jkt rated 75 psi. Str jkt. Jkt on top head and shell. Ex-cel-o agit drive,
Mdl SHV-35A308-88, rated 4.25 HP, 10:1 ratio, 83 rpm min, driven by
Reliance varidrive, 5:1 ratio, min 83 rpm, max 830 rpm, w/5 HP,
3/60/230/460 volt, 1730 rpm motor. Mech seal. Has double helicoil agit.
Openings: top 1-2", 1-1 1/2", 2" x 6", 1-3";
2" center btm outlet. Mtd on CS frame. |
|
22083 |
10 |
316 SS |
10
gal 316SS vert agit autoclave/reactor. 10" ID x 30" str side,
screwed flat top, weld flat btm. Mfd by Pressure Prod Ind, SN 2493.
Working pressure 2500 psi @ 325 deg C (610 deg F), test @ 4150 psi. 304SS
full jkt. Agit belt driven by 3/4 HP, 3/60/220/440 volt motor, UL label,
w/varidrive range from 154 rpm to 1540 rpm. Mech seal. Openings: cover 1-1
1/4", 1-1/4"; body 2-1", 2-1/4", 1-1/2". |
|
22084 |
20 |
304 SS |
20
gal 304SS clad vert autoclave/reactor. 12" dia x 36" str side,
bolt dish top, dish btm. Mfd by Lukens. Int rated 5,000 psi. Full CS jkt.
Unit has approx 1 HP drive w/packing gland. Openings: top 1-6",
2-2", 1-1"; no btm outlet. Mounts on (4) lugs. |
|
22085 |
40 |
HASTELLOY |
Refinished
40 gal Hastelloy C vert jkt agit reactor. 24" dia x 22" str
side, Hastelloy C clad bolt flat top, weld dish btm. Mfd by Tolan, NB
#1575, SN 6464. Int rated 165 psi/full vac @ 300 deg F; jkt rated 90 psi/full
vac @ 350 deg F. CS jkt on str side only. Flange mtd straight through
design, Phila Mdl PMG-11 drive, 350 rpm output. Driven by 1 HP, 3/60/460
volt, 1725 rpm TEFC motor. Mech seal. (1) 6-blade str turbine, (1) 4-blade
pitched paddle. (4) baffles on wall. 3/16" thickness. Openings: top
5-1", 1-3", 5" x 4" for sight glass (no sight glass or
cover); btm 1-2". (4) legs. |
|
22086 |
50 |
304 SS |
50
gal vert 304SS jkt autoclave/reactor. 18" dia x 48" str side, 3
1/2" thick flat top w/hydraulic closure, weld dish btm. Mfd by WSF
Industries, NB #10077, SN 10077. Int rated 1650 psi @ 100 deg F thru 325
deg F; jkt rated 75 psi @ 100 deg F thru 325 deg F. Magna drive w/approx 3
HP US varidrive. Openings: btm 1-1". |
|
22087 |
50 |
304 SS |
50
gal 304SS vert jkt autoclave body. 24" dia x 24" str side, bolt
flat top, weld dish btm. Mfd by Camden Alloy Fab, SN 81-8396, NB #1814.
Int rated 1000 psi @ 400 deg F; jkt rated 150 psi @ 400 deg F. 304SS jkt,
304SS lined top cover. Head .188"-.750" thick, shell
.188"-.875" thick. Openings: top 2-2", 1-1 3/4"
center, 2-1"; btm 1-1". (4) lugs. |
|
22088 |
60 |
304 SS |
60
gal 304SS clad vert autoclave/reactor. 24" dia x 42" str side,
flat bolt top, dish btm. Mfd by Blaw Knox, NB #8114. Int rated 2000 psi @
650 deg F. Full CS jkt rated 175 psi @ 650 deg F. Unit has pedestal for
drive mount (no drive). Mech seal on shaft. Openings: top 1-4",
1-4"; btm 1-1". Mounts on (4) legs. |
|
22089 |
60 |
316 SS |
60
gal (250 litre) 316SS autoclave/reactor. 24" dia x 30" str side,
bolt hemi-top, weld dish btm. Mfd by Sulzer (Switzerland), SN 10785. Jkt
rated 6 bar (87 psi), int rated 40 bar (580 psi). Driven by 3 KW, 3/50/500
volt XP varispeed drive, 110 min-295 max rpm. Packing gland on shaft.
Openings: top 8" manway w/cover, 6-2"; no btm outlet. |
|
22090 |
75 |
316 SS |
75
gal 316SS vert agit reactor/autoclave w/coil. 24" dia x 36" str
side, bolt dish top, weld dish btm. Mfd by SS Process Equip Corp, NB #625,
SN 5179-963. Int rated 500 psi @ 950 deg F, coil rated 200 psi @ 950 deg
F. Top head 11/16" thick, btm head 7/16" thick, shell .50"
thick. Has seal housing, no drive, design for belt drive. Packing gland.
Openings: top 1-4", 4-1", 3-2"; side 2-2" tangential,
2-1" tangential for coil; 2" center btm outlet. (4) CS legs on
platform. |
|
22091 |
75 |
316 SS |
75
gallon 316SS autoclave reactor. 24" diameter x 38" straight
side, bolted dished top, welded dished bottom. Manufactured by Alloy Fab,
Serial #1825. Internal rated 500 psi/full vacuum @ 350 degree F; jacket
rated 125 psi/full vacuum @ 350 degree F. Full CS jacket. Right angle,
pedestal mounted Pfaudler 2.5TW drive, approx 5 HP, direct coupled. (2)
3-blade propellors. High duty packing gland. Shell .500" thick, heads
.500" thick, jacket .250" thick. Openings: top 3-1 1/4",
2-2", 1-3"; no bottom opening. (4) couplings for pipe legs. |
|
22092 |
75 |
317 SS |
75
gal 317SS vert jkt agit reactor. 24" dia x 30" str side, bolted
dished top, welded dished btm. Mfd by Emerson, SN OCEAN26. Int rated 75
psi @ 600 deg F, jkt rated 75 psi @ 600 deg F. Str jkt. Flange mtd, right
angle design, Cleveland Mdl 10VT, Series 25 agit drive, SN 106849, rated 2
HP, 8:1 ratio, belt driven by 2 HP, 3/60/220/440 volt, 1150 rpm motor.
Mech seal. Has 2-tier 6-blade turbine. Openings: top 2-1 1/4",
1-4", 1-6", 1-4" sight glass; 1-2" center btm outlet.
Legs. |
|
22093 |
85 |
316 SS |
85
gal 316SS polished vert jkt agit reactor. 30" dia x 26" str
side, weld dish top and btm. Mfd by Alloy Fab, SN 2704, NB #1603. Int
rated 30 psi/full vac @ 300 deg F; jkt rated 150 psi @ 400 deg F. Dimple
jkt covered w/SS sheath. Lightnin Mdl XJSS-200 drive, driven by 2 HP,
3/60/230/460 volt, 1730 rpm motor. 4-blade pitched paddle agit and (4)
baffles on wall. Mech seal. Shell .1875" thick, jkt .109" thick.
Openings: top 1-8" w/cover on davit, 1-2", 2-3/4",
1-3" sight glass. (4) legs w/SS base. Stop/start panel w/power cord.
|
|
21021 |
100 |
316 SS |
REACTOR, 316SS, 100 GAL, VERT, SIZE: 34 IN DIA
X 31 IN LG, DESIGN: 150#/FV @ 325 F, NB: 313, W/ PLATE, MFG: PERRY
PRODUCTS, THK TEST 1993, .390 WALL, W/AGITATOR |
|
22094 |
100 |
316 SS |
100
gal 316SS vert reactor. 30" dia x 34" str side, weld dish top
and btm. Mfd by Patterson Ind, SN 751574, NB #1728. Int rated 75 psi or
full vac @ 350 deg F; jkt rated 100 psi @ 350 deg F. Full CS jkt. Reliance
Mdl 5-SM156 agit drive, SN 10111463, rated 1 HP, 4.1:1 ratio, driven by 1
HP, 3/60/230/460 volt, 1130 rpm motor, UL label. Packing gland. 4-blade
pitch paddle agit, (4) welded baffles. Openings: top 6" x 10"
manway w/hinged cover and swing bolt closure, 2-2", 1-4", 1-1
1/2", 1-1"; side 1-2"; 2" center btm outlet. (4) legs.
|
|
22095 |
100 |
316 SS |
100
gal 316SS vert jkt agit low pressure reactor. 36" dia x 20" str
side, weld dish top and btm. Mfd by DECO, SN 8499, NB #1657. Int rated 15
psi; jkt rated 100 psi @ 300 deg F. Str jkt. Lightnin Mdl #N33G-10B, SN
6619645, direct coupled to 1 HP, 3/60/208/220/440 volt, 1760 rpm motor.
Packing gland. Openings: top 1-8" w/swing bolt hinged cover,
4-2", 1-12", 1-8"; 2" center btm outlet. (4) legs. Has
vert condenser mtd on top head, mfd by DECO, SN 8501, U-stamped. Rated 115
psi @ 300 deg F. |
|
22096 |
100 |
316 SS |
100
gal 316SS vert jkt agit reactor. 30" dia x 24" str side, bolt
dish top, weld hemi-btm. Mfd by American Boiler Tank and Welding Co, SN
H-10078, blt 1988. Int rated 50 psi @ 750 deg F, jkt rated 100 psi @ 750
deg F. Chemineer Mdl 1-HTN-1 agit drive, SN 1-94085-2, rated 1 HP, 84 rpm
output, direct coupled to 1 HP, 3/60/208/230/460 volt, 1725 rpm motor, UL
label. Mech seal. 4-blade pitch paddle agit and (4) welded baffles.
Openings: top 1-8" w/hinged swing bolt cover, 1-2", 3-1
1/2", 1-3" sight glass; btm 1-2" with 2" SS flush
valve". (4) lugs. |
|
22097 |
100 |
316 SS |
100
gal 316SS (polished) vert jkt agit reactor. 30" dia x 36" str
side, bolt dish top, weld dish btm. Mfd by Expert Industries, SN 401. Int
rated 40 psi @ 200 deg F, jkt rated 75 psi @ 300 deg F. 12 gauge 304SS
dimple jkt. W/sheathing cover. 3/16" thick. Lightnin Mdl N33G-50 agit
drive, driven by 1/2 HP, 3/60/230/460 volt, 1725 rpm motor. Packing gland.
(4) baffles. 3-blade propellor. Openings: top 1-6", 2-5" sight
glasses, 2-1", 1-3", 1-1 1/2"; btm 1-1 1/2". (4) legs.
|
|
22098 |
110 |
316 SS |
110
galllon 316SS vertical jacketed agitated reactor/fermenter. 24" dia x
55" str side, bolt dish top (19") long, weld dish bottom. 316SS
jacket with 304SS shroud. Mfd by Roben, SN 72110-5, NB #2578. Int rated 75
psi/full vac @ 340 deg F; jkt rated 100 psi/full vac @ 340 deg F. Lightnin
agit drive, Mdl N333DS-500, SN 7210970, , mech seal, direct coupled to 10
HP, 3/60/460 volt, 870 rpm TEFC motor. 1 1/2" dia x 84" long
316SS agit w/(3) 6-blade turbines and steady bearing. Shell 1/4",
7/16" thick; head 1/4", 5/16" thick. Openings: top
1-4" center, 1-4", 7-1", 2-2", 2-1 1/4",
4-3/4"; top side 1-12" w/hinged clamp cover; side 1-1 1/4",
2-1", 2-3/4"; btm 3-2". (4) CS lugs. |
|
22099 |
110 |
316 SS |
110
gallon 316SS vertical jacketed agitated reactor/fermenter. 24" dia x
55" str side, bolt dish top, weld dish bottom. 316SS jacket with
304SS shroud. Mfd by Roben, SN 72110-1, NB #2574. Int rated 75 psi/full
vac @ 340 deg F; jkt rated 100 psi/full vac @ 340 deg F. Lightnin agit
drive, Mdl N333DS-500, SN 7210968,mech seal, direct coupled to 10 HP,
3/60/460 volt, 870 rpm TEFC motor. 1 1/2" dia x 84" long 316SS
agit w/(3) 6-blade turbines and steady bearing. Shell 1/4",
7/16" thick; head 1/4", 5/16" thick. Openings: top
1-4" center, 1-4", 7-1", 2-2", 2-1 1/4",
4-3/4"; top side 1-12" w/hinged clamp cover; side 1-1 1/4",
2-1", 2-3/4"; btm 3-2". (4) CS lugs. |
|
22100 |
110 |
316 SS |
110
gallon 316SS vertical jacketed agitated reactor/fermenter. 24" dia x
55" str side, bolt dish top, weld dish bottom. 316SS jacket with
304SS shroud. Mfd by Roben, SN 72110-2, NB #2575. Int rated 75 psi/full
vac @ 340 deg F; jkt rated 150 psi/full vac @ 340 deg F. Lightnin agit
drive, Mdl N333DS-500, SN 7210971, mech seal, direct coupled to 10 HP,
3/60/460 volt, 870 rpm TEFC motor. 1 1/2" dia x 84" long 316SS
agit w/(3) 6-blade turbines and steady bearing. Shell 1/4",
7/16" thick; head 1/4", 5/16" thick. Openings: top
1-4" center, 1-4", 7-1", 2-2", 2-1 1/4",
4-3/4"; top side 1-12" w/hinged clamp cover; side 1-1 1/4",
2-1", 2-3/4"; btm 3-2". (4) CS lugs. |
|
22101 |
110 |
316 SS |
110
gallon 316SS vertical jacketed agitated reactor/fermenter. 24" dia x
55" str side, bolt dish top, weld dish bottom. 316SS jacket with
304SS shroud. Mfd by Roben, SN 72110-7, NB #2580. Int rated 75 psi/full
vac @ 340 deg F; jkt rated 100 psi/full vac @ 340 deg F. Lightnin agit
drive, Mdl N333DS-500, SN 7210969, mech seal, direct coupled to 10 HP,
3/60/460 volt, 870 rpm TEFC motor. 1 1/2" dia x 84" long 316SS
agit w/(3) 6-blade turbines with steady bearing. Shell 1/4",
7/16" thick; head 1/4", 5/16" thick. Openings: top
1-4" center, 1-4", 7-1", 2-2", 2-1 1/4",
4-3/4"; top side 1-12" w/hinged clamp cover; side 1-1 1/4",
2-1", 2-3/4"; btm 3-2". (4) CS lugs. |
|
22102 |
110 |
316 SS |
110
gallon 316SS vertical jacketed agitated reactor/fermenter. 24" dia x
55" str side, bolt dish top,, weld dish bottom. 316SS jacket with
304SS shroud. Mfd by Roben, SN 72110-3, NB #2576. Int rated 75 psi/full
vac @ 340 deg F; jkt rated 100 psi/full vac @ 340 deg F. 304SS str jkt.
Lightnin agit drive, Mdl N333DS-300, mech seal,, direct coupled to 10 HP,
3/60/460 volt, 870 rpm TEFC motor. 1 1/2" dia x 84" long 316SS
agit w/(3) 6-blade turbines and steady bearing. Shell 1/4",
7/16" thick; head 1/4", 5/16" thick. Openings: top
1-4" center, 1-4", 7-1", 2-2", 2-1 1/4",
4-3/4"; top side 1-12" w/hinged clamp cover; side 1-1 1/4",
2-1", 2-3/4"; btm 3-2". (4) CS lugs. |
|
22103 |
110 |
316 SS |
110
gallon 316SS vertical jacketed agitated reactor/fermenter. 24" dia x
55" str side, bolt dish top, weld dish bottom. 316SS jacket with
304SS shroud. Mfd by Roben, SN 72110-6, NB #2579. Int rated 75 psi/full
vac @ 340 deg F; jkt rated 100 psi/full vac @ 340 deg F. Lightnin agit
drive, Mdl N33DS-300, mech seal, direct coupled to 10 HP, 3/60/460 volt,
870 rpm TEFC motor. 1 1/2" dia x 84" long 316SS agit w/(3)
6-blade turbines with steady bearing. Shell 1/4", 7/16" thick;
head 1/4", 5/16" thick. Openings: top 1-4" center,
1-4", 7-1", 2-2", 2-1 1/4", 4-3/4"; top side
1-12" w/hinged clamp cover; side 1-1 1/4", 2-1",
2-3/4"; btm 3-2". (4) CS lugs. |
|
22104 |
110 |
316 SS |
110
gallon 316SS vertical jacketed agitated reactor/fermenter. 24" dia x
55" str side, bolt dish top, weld dish bottom. 316SS jacket with
304SS shroud. Mfd by Roben, SN 72110-4, NB #2577. Int rated 75 psi/full
vac @ 340 deg F; jkt rated 100 psi/full vac @ 340 deg F. Lightnin agit
drive, Mdl N33DS-300, mech seal, direct coupled to 10 HP, 3/60/460 volt,
870 rpm TEFC motor. 1 1/2" dia x 84" long 316SS agit w/(3)
6-blade turbines with steady bearing. Shell 1/4", 7/16" thick;
head 1/4", 5/16" thick. Openings: top 1-4" center,
1-4", 7-1", 2-2", 2-1 1/4", 4-3/4"; top side
1-12" w/hinged clamp cover; side 1-1 1/4", 2-1",
2-3/4"; btm 3-2". (4) CS lugs. |
|
22105 |
110 |
316 SS |
110
gallon 316SS vertical jacketed agitated reactor/fermenter. 24" dia x
55" str side, bolt dish top, weld dish bottom. 316SS jacket with
304SS shroud. Mfd by Roben, SN 72110-8, NB #2581. Int rated 75 psi/full
vac @ 340 deg F; jkt rated 100 psi/full vac @ 340 deg F. Lightnin agit
drive, Mdl N33DS-300, mech seal, direct coupled to 10 HP, 3/60/460 volt,
870 rpm TEFC motor. 1 1/2" dia x 84" long 316SS agit w/(3)
6-blade turbines with steady bearing. Shell 1/4", 7/16" thick;
head 1/4", 5/16" thick. Openings: top 1-4" center,
1-4", 7-1", 2-2", 2-1 1/4", 4-3/4"; top side
1-12" w/hinged clamp cover; side 1-1 1/4", 2-1",
2-3/4"; btm 3-2". (4) CS lugs. |
|
22106 |
130 |
316 SS |
130
gal (500 liters) 316SS vert jkt agit reactor/autoclave. 32" (800mm)
dia x 30" (750mm) str side, bolt hemi-top, weld hemi-btm. Mfd by Gen
Sulzer, SN 10844. Int rated 588 psi (40 bar), jkt rated 176 psi (12 bar).
Str jkt. Stover Mdl SZR65-4 agit drive, 6 HP (4.6 KW), varidrive 50 to 250
rpm. Direct coupled to 6 HP, 3/50/500 volt, 1150 rpm motor, UL label.
Packing gland. Openings: top 1-8" (200mm) handhole, 5-1 1/2"
(35mm) screwed fitting; btm 1-1" (25mm). (3) legs. |
|
22107 |
130 |
316 SS |
130
gal (500 liter) 316SS clad high pressure autoclave/reactor. 850mm dia x
1280mm from flange to btm head. Mfd by Zschokke Wartmann, SN 10996. Int
rated 1450 psi (100 bar) and full vac; 1/2 pipe coil rated 188.5 psi (13
bar). W/5.0 KW, 3/50/500 volt variable speed agit, 100-1400 rpm. 40mm dia
agit shaft. High duty mech seal. Blow out tube. |
|
22110 |
150 |
304 SS |
RECONDITIONED
150 gal vert 304SS autoclave/reactor. 32" dia x 2'10" str side.
Mfd by Blaw Knox, SN 14100, NB #4903. Jkt rated 110 psi @ 350 deg F, int
rated 600 psi @ 350 deg F. CS jkt. Unit has 6-blade turbine agit. Driven
by Foote Bros gearbox, 7.33:1 ratio SN 1-H-1969082, Size 4V. Rated 1440
rpm input, 189 rpm output, w/5 HP, 3/60/220/440 volt, 1725 rpm TEFC motor.
Openings: top 2-1" nozzle, 1-7" handhole w/cover; no btm outlet.
(4) lugs w/legs. (*) |
|
22109 |
150 |
316 SS |
150
gal 316SS vert jkt agit reactor. 30" dia x 48" str side, weld
dish top and btm. Mfd by Lipton, SN 78-8180-A, NB #183. Shell rated 200
psi @ 450 deg F to -20 deg F min, jkt rated 200 psi @ 550 deg F to -20 deg
F min. Full CS jkt. Pfaudler 3DTW agit drive, belt driven w/varispeed
pulleys, 5 HP, 3/60/230/460 volt, 1740 rpm motor, UL label. Mech seal.
4-blade pitch paddle agit and (4) welded baffles. Openings: top 1-8"
w/hinged bolt cover, 3-2", 1-1", 1-4" sight glass;
1-1/2", 3" center btm outlet. |
|
22108 |
150 |
347 SS |
****150
gal 347SS clad (10%) vert jkt agit reactor/autoclave. 30" dia x
42" str side. Mfd by Blaw Knox, NB #15591, SN B19479. Jkt rated 100
psi @ 750 deg F, int rated 600 psi @ 650 deg F. Full CS str jkt. Lightnin
Mdl 82-S-5V agit drive, SN 718242, rated 5 HP, 7.73:1 ratio, 226/75.3 rpm
output, belt driven w/varispeed sheave, 5 HP, 3/60/230/460 volt, 1740 rpm
motor. Mech seal. 15 1/2" Blaw Knox shrouded type turbine agit.
Openings: top 1-6", 2-1", 2-1 1/2". (4) legs on lugs. |
|
22111 |
156 |
316 SS |
156
gal (590 liter) 316SS horiz reactor/vac dryer. Mfd by Vickers, SN 1413.
Int rated vac @ 590 deg F, jkt rated 31.3 psi @ 590 deg F, shaft rated
31.3 psi @ 590 deg F. Ribbon type agit. Driven by 3 KW electric motor thru
gear reducer. Skid mtd. Working capacity of 10 cu ft. |
|
22112 |
156 |
316 SS |
156
gal (590 liter) 316SS horiz reactor/vac dryer. Mfd by Vickers, SN 1412.
Int rated vac @ 590 deg F, jkt rated 31.3 psi @ 590 deg F, shaft rated
31.3 psi @ 590 deg F. Ribbon type agit. Driven by 3 KW electric motor thru
gear reducer. Skid mtd. Working capacity of 10 cu ft. |
|
22116 |
160 |
304 SS |
160
gal 304SS (polished) vert jkt agit reactor. 26" dia x 68" str
side, bolt dish top, weld dish btm. Mfd by Tolan, SN 6862-2, NB #1771, blt
1988. Int rated 90 psi/full vac @ 400 deg F, jkt rated 65 psi @ 400 deg F.
304SS str jkt on 1/2 of str side. Reeves varidrive, output max 2630 rpm,
min 658 rpm, driven by 2 HP, 3/60/230/460 volt motor. Mech seal. (4)
baffles, (2) 6-blade paddle agitators. Openings: top 1-6", 4-1",
2-4" sight glasses; btm 1-2". |
|
22117 |
160 |
304 SS |
160
gal 304SS (polished) vert jkt agit reactor. 26" dia x 68" str
side, bolt dish top, weld dish btm. Mfd by Tolan, SN 6862-2, NB #1771, blt
1988. Int rated 90 psi/full vac @ 400 deg F, jkt rated 65 psi @ 400 deg F.
304SS str jkt 1/2 of str side. Reeves varidrive, max 2630 rpm, min 658
rpm. 2 HP, 3/60/230/460 volt motor. Mech seal. (4) baffles. (2) 6-blade
paddle agitators. Openings: top 1-6", 4-1", 2-4" sight
glasses; btm 1-2". |
|
22118 |
160 |
304 SS |
160
gal 304SS (polished) vert jkt agit reactor. 26" dia x 68" str
side, bolt dish top, weld dish btm. Mfd by Tolan, SN 5790, NB #1029. Int
rated 90 psi/full vac @ 400 deg F; jkt rated 65 psi @ 400 deg F. 304SS str
jkt on 1/2 of str side. Chemineer Mdl 2HTN-2 agit drive, driven by 2 HP,
3/60/230/460 volt motor. Mech seal. (4) baffles, (2) 6-blade paddle
agitators. Openings: top 1-6", 4-1", 2-4" sight glasses;
btm 1-2". |
|
22113 |
160 |
316L SS |
160
gal (630 liter) 316LSS (1.4435) agit jkt reactor. 1000mm/1048mm dia x
700mm str side, bolt dish top, weld dish btm. Mfd by Estrella, SN 1080.
Int rated 2 bar and full vac, jkt rated 6 bar. W/half pipe coil jkt on str
side and btm head. Equipped w/350mm dia 6-blade retreat curve impellor
agit. Mech seal on shaft w/V-belt to gear reducer. Driven by BBC Type
MQUFa-54/8, 1.5/2.2 PS, 3/50/500 volt, 720/1425 rpm XP motor. Agit output
speed 160 rpm. Openings: top 300mm manway w/cover and 80mm sight glass,
1-200mm, 2-65mm, 1-50mm, 2-40mm; 1-50mm center btm outlet. Lugs for
mounting. Designed to Swiss code standards. |
|
22114 |
160 |
316L SS |
160
gal (630 liter) 316LSS (1.4435) agit jkt reactor. 1006mm dia x 700mm str
side, bolt dish top, weld dish btm. Mfd by Estrella, SN 1080. Int rated 2
ATU and full vac; jkt rated 6 ATU. Equipped w/3-blade retreat curve
impellor agit. Mech seal on shaft, V-belt driven by Von Rohr agit drive
with 1/1.84 KW, 3/50/500 volt EXeG4 motor, output speed 45/90 rpm.
2-finger upward baffle w/sensor. Sparger ring pipe on top around the
shaft. Openings: top 300mm manway w/cover, davit and 150mm sight glass,
1-80mm for light, 1-200mm, 2-65mm, 1-50mm, 2-40mm; 1-50mm center btm
outlet. Lugs for mounting. |
|
22115 |
160 |
SS |
160
gal (630 liter) 1.4435 agit jkt reactor system. 1600mm dia x 300mm str
side, bolt hemi-top, weld hemi-btm. Equipped w/anchor agit, mtd on 125mm
dia shaft, driven by Von Rohr agit drive, Type 80/S/2/4, 16-80 rpm output
speed, rated 3.5 PS. Mech seal on shaft w/oil circulation pump, driven by
0.25 KW, 3/50/380/500 volt, 1430 rpm XP motor. Agit driven by 2.2 KW,
3/50/500 volt, 1430 rpm XP motor. Baffle. Openings: top 500mm manway
w/cover, davit and 150mm sight glass, 1-300mm for column, 1-300mm
w/1-150mm for baffle, 2-75mm, 1-75mm, 1-150mm for light; 1-75mm center btm
outlet. Mounting lugs. System includes 25 sq meter horiz all SS tube and
shell heat exchanger (#104584). |
|
22119 |
166 |
316 SS |
166
gal (630 liter), 316SS vert jkt agit reactor. 40" (1000mm) dia x
32" (800mm) str side, bolt dish top, weld dish btm. Mfd by J Schmal,
SN 12240. Int rated 88 psi @ 662 deg F (6 bar @ 350 deg C), jkt rated 1595
psi @ 662 deg F (110 bar @ 350 deg C). 1/2 pipe coil jkt. Heynau Mdl 10VSM
agit drive, SN 107051, rated 3 HP, 71 to 640 rpm output. Requires belt
driven motor (no motor w/unit). Single blade agit (like anchor). Openings:
top 2-200mm, 3-3" (70mm), 1-2" (50mm), 2-5" glasses; btm
1-2" (50mm). (4) legs. Designed to TUV standards. |
|
22121 |
200 |
316 SS |
200
gal Pfaudler 316SS reactor. 40" dia x 36" str side, weld dish
top and btm. Full CS jkt. Unit has Michigan cone gear drive w/V-speed
sheave. Mech seal on shaft. 6-blade disc turbine agit. Openings: top
12" x 16" manhole, 3-2", 1-4", 1-1 1/2",
1-6"; btm 3" outlet. |
|
22122 |
200 |
316 SS |
200
gal (800 liter) total capacity, 316SS vert jkt agit reactor. 910mm dia x
810mm str side, bolt dish top, weld dish btm. Mfd by DeDietrich, SN
8239/8. Int rated 6 bar and full vac @ -10/+20 deg C; jkt rated 6 bar @
-10/+140 deg C. Str jkt. 316SS 3-finger retreat curve agit. Sew-Usocume
agit drive, Type RF72-73P, 144-1400 rpm output, belt driven by 3 KW,
3/50/220/380 volt, 1400 rpm TEFC motor. Mech seal w/lubricator. Openings:
top 1-8", 1-5" sight glass, 4-2"; jkt 2-1 1/2"; btm
1-4". Mtd lugs. Total jkt volume 180 liter. |
|
22124 |
200 |
316 SS |
200
gal 316SS reactor. 42" dia x 34" str side, weld dish top and btm.
Mfd by TWC Works, NB #219, SN 7987-614. Int rated 30 psi/full vac, jkt
rated 75 psi/full vac. Lightnin agit drive, Mdl 118-TEC-22. Packing gland.
Openings: top 2-1", 1-2", 1-1 1/2", 1-4" sight glass,
1-16" w/cover; btm 1-2". |
|
22123 |
200 |
316L SS |
200
gal 316LSS vert jkt agit reactor. 36" dia x 4' str side, bolt dish
top, weld dish btm. Mfd by Bauer and Morris, SN 25925-1, blt 1985. Int
rated 20 psi @ 300 deg F, jkt rated 52 psi @ 300 deg F. CS str jkt.
Quadroplex drive, 5 HP, 8:1 ratio, 147 rpm output, belt driven by 5 HP,
3/60/220 volt, 1160 rpm motor, UL label. Packing gland. (2) 6-blade pitch
paddle 18" span nickel turbines. Openings: top 4-1 1/2",
1-4" sight glass; btm 1-3". (4) lugs. |
|
22120 |
200 |
HASTELLOY |
Refinished
200 gal Pfaudler EM Series vert Hastelloy coated reactor. 40" dia x
38" flange to flange, clamp dish top, dish btm. SN L10331, NB #12104.
Jkt rated 90 psi @ 350 deg F, 75 psi w/full vac; int rated 25 psi @ 350
deg F. Has 4DTW style agit drive. Mech seal. Belt driven by 3 HP,
3/60/230/460 volt, 1735 rpm motor, UL label. Openings: top 12" x
16" manway w/cover and sight glass, 1-6", 3-4"; 1-3"
center btm outlet. (4) 3 1/2" pipe legs. Approx 20 mil of Hastelloy
coating. |
|
22126 |
200 |
SS |
200
gal (800 liter) all 1.4571 agit jkt reactor. 1000mm dia x 928mm str side,
bolt dish top, weld dish btm. Mfd by R Stihler, SN 7667. Int rated 10 bar
and full vac @ -20/+150 deg C; jkt rated 6 bar @ -10/+150 deg C. Equipped
w/3-blade retreat curve impellor agit. Packing gland on shaft. Equipped
w/SEW Eurodrive Type RF73WRU24, rated 3.0 PS, 3/50/380 volt, 930 rpm. Agit
speed 14-109 rpm. Openings: top 420mm x 320mm manway w/cover and 100mm
sight glass, 3-50mm, 1-40mm, 1-100mm; 1-80mm center btm outlet. Designed
to German TUV standards. |
|
22125 |
200 |
SS
SANITARY |
200
gal (800 liter) 1/4571 sanitary agit jkt reactor. 1000mm dia x 948mm str
side, bolt dish top, weld dish btm. Mfd by R Stihler, SN 7088. Int rated 6
bar, 1/2 pipe coil jkt rated 16 bar @ 250 deg C. Equipped w/3-blade
retreat curve impellor agit. Packing gland on shaft. W/dip tube baffle
w/restricted tip. W/Eurodrive SEW type DW132S6F, 2.6 KW, 3/50/380 volt
motor w/variable speed 14-109 rpm. Openings: top 420mm x 320mm bolt manway
w/cover and sight glass, 1-150mm, 1-80mm, 1-65mm, 1-50mm, 1-40mm; 1-80mm
center btm outlet. Lugs for mounting. Total volume 1050 liters. Designed
to German TUV standards. |
|
22132 |
250 |
316 SS |
250
gal 316SS jkt agit reactor. 36" dia x 48" str side, bolt dish
top, weld dish btm. 304SS dimple jkt on str side and btm head. Winsmith
agit drive, driven by 3 HP, 3/60/440 volt, 1750 rpm motor. 6-blade turine.
Packing gland. Openings: top 1-8", 1-4", 2-2"; btm
1-2". |
|
22133 |
250 |
316 SS |
250
gal 316SS vert jkt agit reactor. 42" dia x 36" str side, bolt
dish top, weld dish btm. Mfd by Peter Dinckels and Sons, SN 9455. Int
rated 43.5 psi/full vac (3 bar) @ 210 deg C; jkt rated 232 psi (16 bar) @
210 deg C. 1/2 pipe coil jkt. Ekato agit drive, Mdl HWL-2060, SN 7517287,
rated 3.6 KW, 45-57 rpm output. Belt driven by 3.6 KW, 3/60/220 volt
motor, UL label. Double mech seal. Anchor agit 2 1/2" dia shaft.
Openings: top 1-10" w/cover, 2-5" sight glasses, 1-1 1/2",
2-2", 1-8"; str side 2-2"; btm 1-2"; 3" btm
outlet. (4) lugs. |
|
22127 |
250 |
316L SS |
250
gal (1000 liter) 316LSS (1.4435) agit jkt reactor w/int coils. 1200mm dia
x 1000mm str side, bolt dish top, weld dish btm. Mfd by Romabau, SN 21061.
Int rated 3.2 bar, SS half pipe coil jkt and int coil rated 13 bar @ 200
deg C. Int coil consists of (9) circles of 50mm dia pipe @ 30mm pitch.
Equipped w/6-blade turbine agit. Packing gland on shaft, w/Von Rohr agit
drive, driven by 2.5 KW, 3/50/500 volt, 1415 rpm EX motor. (3) baffles
100mm wide. Openings: top 300mm manway w/cover, davit and 125mm sight
glass, 1-300mm w/1-75mm, 2-50mm, 1-300mm w/2-75mm, 2-50mm, 1-38mm; 1-100mm
center btm outlet. Mounting lugs. |
|
22128 |
250 |
316L SS |
250
gal (1000 liter) 316LSS (1.4435) sanitary agit jkt reactor. 1200mm dia x
700mm str side, bolt dish top, weld dish btm. Mfd by Buss, SN 19818. Int
rated 2 bar, half pipe coil jkt rated 6 bar. Equipped w/anchor agit
w/spring loaded wipers. Mech seal on shaft. Driven by 2.5 HP, 3/50/500
volt, 940 rpm XP motor. 2-finger baffle, dip tube pipe w/restricted tip.
Openings: top 400mm manway w/cover and 80mm sight glass, 1-250mm, 4-50mm,
1-100mm for dip tube, 1-80mm for light, 1-40mm; 1-75mm center btm outlet.
Mounting lugs. |
|
22129 |
250 |
316L SS |
250
gal (1000 liter) 316LSS (1.4435) sanitary agit jkt reactor. 1200mm dia x
700mm str side, bolt dish top, weld dish btm. Mfd by Buss. Int rated 2
bar, 1/2 pipe coil jkt rated 6 bar. Equipped w/anchor agit w/spring loaded
wipers. Agit output speed 125 rpm. Shaft 60mm dia. Mech seal on shaft.
Driven by 2.5 HP, 3/50/500 volt, 940 rpm XP motor. 2-finger upward baffle
w/restricted tip. Openings: top 450mm manway w/cover and 75mm sight glass,
1-250mm, 4-50mm, 1-100mm, 1-25mm for light; 75mm center btm outlet.
Mounting lugs. |
|
22130 |
250 |
316L SS |
250
gal (1000 liter) 316LSS (1.4435) sanitary agit jkt reactor. 1188mm dia x
954mm str side, bolt dish top, weld dish btm. Mfd by Otto Wild, Comm
#420-001. Int rated 3.2 bar; CS 1/2 pipe coil jkt rated 16 bar @ 200 deg
C. Equipped w/anchor agit w/spring loaded wipers. Mech seal on shaft.
Driven by 4.5 HP, 3/50/500 volt, 1435 rpm XP motor. 2-finger upward baffle
w/restricted tip. Sparger pipe. Openings: top 400mm manway w/cover, davit
and 125mm sight glass, 1-300mm w/3-75mm, 1-300mm; 1-75mm center btm
outlet. I-beam legs. |
|
22131 |
250 |
316L SS |
250
gal (1000 liter) 316LSS (1.4435) sanitary agit jkt reactor. 1188mm dia x
954mm str side, bolt dish top, weld dish btm. Mfd by Otto Wild, SN 32816.
Int rated 2 bar, CS half pipe coil jkt rated 6 bar. Equipped w/(4) sets of
2-blade 45 deg axial flow turbine agitators. Mech seal on shaft. Driven by
2.5 KW, 3/50/500 volt, 1450 rpm XP motor. Openings: top 300mm manway
w/cover, davit and 125mm sight glass, 1-250mm w/3-75mm, 1-250mm, 1-125mm
sight glass, 1-100mm; 1-100mm center btm outlet. Mounting lugs. |
|
22134 |
250 |
316L SS |
250
gal polished 316LSS vert jkt agit reactor. 40" dia x 48" str
side, weld elliptical top and btm. Mfd by Richard Stihler, SN 9296, NB
#31. Int rated 43.5 psi/full vac @ 338 deg F; jkt rated 87 psi @ 338 deg
F. 304SS str jkt. Has offset Ekato str thru varispeed drive, driven by
approx 2 HP motor. Mech seal on shaft, 2" dia shaft w/3-blade
propellor agit. Openings: top 1-10" manway w/cover, 4-2",
1-8" w/agit; 3" center btm outlet. Mtd on (4) lugs. |
|
22135 |
260 |
316 SS |
260
gal (1000 liter) 316SS (1.4571) vert jkt agit reactor. 47" (1200mm)
dia x 39" (1000mm) str side, bolt dish top, weld dish btm. Mfd by
Samesreuther. Int rated 88 psi @ 662 deg F (6 bar/full vac @ 350 deg C);
jkt rated 1670 psi @ 602 deg F (110 bar @ 350 deg C). 1/2 pipe coil jkt.
Enor Type DSIG-I agit drive. Packing gland. Single blade 24" (600mm)
wide x 26" (650mm) long agit. (4) baffles 3" (80mm) wide.
Openings: top 1-8" (200mm) w/hinged cover, 5-3" (65mm),
2-4" (100mm) sight glasses; btm 1-2" (50mm). (4) lugs. |
|
22136 |
265 |
316 SS |
265
gal (1000 liter) 316SS vert jkt agit reactor. 48" (1200mm) dia x
32" (800mm) str side, bolt dish top, weld dish btm. Mfd by
Samesreuther, SN 13318-02-2. Int rated 88 psi @ 660 deg F (6 bar/full vac
@ 350 deg C), jkt rated 1600 psi @ 660 deg F (110 bar @ 350 deg C). 1/2
pipe jkt. Enor oil gear drive, Type DSIG-1, (no motor). Packing gland.
Openings: top 2-8" (200mm) (1-w/hinged cover), 1-6" (150mm),
2-3" (75mm); btm 1-2" (50mm). (4) lugs. |
|
22137 |
265 |
316 SS |
265
gal (1000 liter) 316SS vert jkt agit reactor. 47.5" (1200mm) dia x
31.5" (800mm) str side, bolt dish top, weld dish btm. Mfd by
Samesreuter. Int rated 88 psi @ 660 deg F (6 bar/full vac @ 350 deg C),
jkt rated 88 psi (6 bar). 1/2 pipe jkt. (10) turns of 2" 316SS pipe
coil inside, rated 6 bar. Enor oil gear drive, Type DSIG-1. Packing gland.
(4) baffles. 600mm wide x 800mm high 1-blade agit. Openings: top 2-8"
(200mm) (1-w/hinged cover), 2-4" (100mm), 5-2" (50mm); btm
1-2" (50mm). (4) brackets. |
|
22138 |
265 |
316 SS |
265
gal (1000 liter) 316SS vert jkt agit reactor. 47.5" (1200mm) dia x
31.5" (800mm) str side, bolt dish top, weld dish btm. Mfd by
Samesreuter, SN 1-3318-0212. Int rated 88 psi @ 660 deg F (6 bar/full vac
@ 350 deg C), jkt rated 1600 psi @ 660 deg F (110 bar @ 350 deg C). 1/2
pipe jkt. Enor oil gear drive, Type DSIG-1. Packing gland. (4) baffles,
anchor agit. Openings: top 2-8" (200mm) (1-w/hinged cover), 2-4"
(100mm), 5-2" (50mm); btm 1-2" (50mm). (4) lugs. |
|
22139 |
265 |
316 SS |
265
gal (1000 liter) 316SS vert jkt agit reactor. 47.5" (1200mm) dia x
31.5" (800mm) str side, bolt dish top, weld dish btm. Mfd by
Samesreuter, SN 11-3318101-2. Int rated 88 psi @ 660 deg F (6 bar/full vac
@ 350 deg C), jkt rated 1600 psi @ 660 deg F (110 bar @ 350 deg C). 1/2
pipe jkt. (10) turns of 2" 316SS pipe coil inside. Enor oil gear
drive, Type DSIG-1. Packing gland. (4) baffles. (1) 24" (600mm) wide
x 32" (800mm) high blade agit. Openings: top 2-8" (200mm) (1
w/hinged cover), 2-4" (100mm), 5-2" (50mm); btm 1-2"
(50mm). (4) lugs. |
|
22140 |
290 |
SS |
290
gal (1100 liter) 1.4571 agit jkt autoclave/reactor. 1000mm dia x 1400mm
from top flange to btm discharge, bolt top, weld dish btm. Mfd by
Dinckiels, SN 7608. Int rated 15 bar @ 200 deg C, jkt rated 120 bar @ 324
deg C. Half pipe coil jkt. Equipped w/gate style agit. Packing gland on
shaft. Driven by 4.4 KW, 3/50/380 volt motor, V-belt drive, w/(2) gear
reducers. Openings: top 450mm x 250mm manway w/davit, 1-150mm, 1-100mm,
2-80mm; 1-80mm center btm outlet. Mounting ring. Designed to German TUV
standards. |
|
22142 |
300 |
304 SS |
300
gal 304SS vert jkt agit reactor w/int sparger. 48" dia x 36" str
side, bolt dish top, weld dish btm. Mfd by Theo Walter Copper Works. Int
rated 15 psi and full vac; jkt rated 15 psi. CS jkt on btm 1/2 of tank.
Tank has 24" dia ring of 2" dia sparge pipe. Lightnin agit drive
w/special cone shape impellor. Openings: top 12" x 16" manway,
1-6", 3-2", 1-1"; 3" center btm outlet. (4) lugs.
|
|
22141 |
300 |
316 SS |
300
gal 316SS sanitary vert jkt agit reactor body. 48" dia x 32" str
side, weld dish top and btm. Mfd by Tolan, SN 6502, NB #1597. Int rated
100 psi @ 350 deg F; jkt rated 150 psi @ 400 deg F. Str jkt. Has flange
cover and packing gland w/shaft (no drive). 316SS shaft 1 1/4" dia x
58" long w/(2) 3-blade impellors. (3) welded baffles inside 4" x
32". Openings: top 1-16" manway w/cover mtd on spring-loaded
davit, 1-6" center reduced to 2"; top 1-4 1/2", 1-2",
3-1" (w/sanitary fittings); side has 3/4" for thermowell;
1-4" center btm outlet. (4) SS welded legs. Insulated, galvanized
shroud str side. |
|
22143 |
300 |
316 SS |
300
gal (1200 liter) 316SS (V4A) agit jkt reactor. 1300mm dia x 965mm str
side, weld dish heads. Mfd by R Stihler, SN 4335. Int rated 3 bar and full
vac; jkt rated 6 bar @ 164 deg C. Shell and heads 6mm thick. Equipped
w/2.8 KW, 3/50/380 volt, 1460 rpm EExeIIPTB motor. Impellor agit.
Openings: top 500mm x 300mm manway w/cover and 75mm sight glass, 1-150mm,
1-125mm, 1-65mm for dip tube, 3-50mm; 1-80mm center btm outlet. Lugs for
mounting. |
|
22144 |
300 |
SS |
300
gal (1200 liter) 1.4571 agit jkt reactor. 1200mm dia x 1000mm str side,
bolt dish top, weld dish btm. Mfd by R Stihler, SN 4433/3. Int rated 6 bar
and full vac; jkt rated 6 bar @ 164 deg C. Equipped w/2.0 KW, 3/50/380
volt variable speed agit drive, 30-126 rpm output speed. Packing gland on
shaft. 3-blade retreat curve impellor agit, dip tube baffle w/restricted
tip. Openings: top 350mm x 450mm manway w/cover and 100mm sight glass,
2-150mm, 2-100mm, 2-80mm; 1-100mm center btm outlet. W/light, temp sensor.
Designed to German TUV standards. |
|
22145 |
300 |
SS |
300
gal (1200 liter), 1.4571 agit jkt reactor. 1200mm dia (1300mm dia w/jkt) x
875mm str side, bolt dish top, weld dish btm. Mfd by Stihler, SN 6442,
Repair SN 11549. Int rated 3 bar and full vac; jkt rated 6 bar @ 200 deg
C. Jkt volume 280 liter, made of steel HII. Total volume 1400 liters.
Shell 10mm thick, heads 8mm thick. Equipped w/1.3 KW, 3/50/220/380 volt,
1425 rpm motor w/variable speed, 2-blade paddle agit, dip tube baffle
w/restricted tip. Openings: top 420mm x 320mm manway w/cover and 100mm
sight glass, 2-150mm, 1-65mm, 3-50mm; 1-80mm center btm outlet. Lugs for
mounting. Designed to German TUV standards. |
|
22146 |
300 |
SS |
300
gal (1200 liter) 1.4571 agit jkt reactor. 1200mm dia x 874mm str side,
bolt dish top, weld dish btm. Mfd by Stihler, SN 9379. Int rated 4 bar and
full vac, jkt rated 6 bar @ 160 deg C. W/1118mm dia anchor agit, shaft
50mm dia w/mech seal on shaft. Driven by 3.0 KW, 3/50/380 volt, 1500 rpm
motor, w/variable speed drive, construction style V1ExeG3, 23-120 rpm.
W/lubricator. 2-finger upward baffle w/temp sensor. Openings: top 420mm x
320mm manway w/cover and counterweight, 1-150mm, 1-100mm for light,
2-50mm, 2-40mm; 1-40mm center btm outlet. Lugs made of 1.4541. Total
volume 1530 liter. |
|
22147 |
350 |
304 SS |
3,240
gal (2700 Imperial gal), 304SS lined vert jkt reactor body. 7'6" dia
x 8'10" str side, weld dish top and btm. Mfd by Steels Process Plt,
SN 9393. Int rated 150 psi/full vac @ 350 deg F, jkt rated 80 psi @ 350
deg F. CS str jkt. Openings: top 1-24", 1-16", 6-8",
3-6", 2-3", 2-2"; side 1-6"; btm 1-10",
1-4", 1-1 1/2". (4) lugs. |
|
22149 |
350 |
304 SS |
RECONDITIONED
350 gal Pfaudler 304SS vert reactor w/unused agit drive. 48" dia x
42" str side, clamp dish top, weld dish btm. ASME #6119, SN E74528.
Int rated 40 psi @ 700 deg F; jkt rated 78 psi @ 700 deg F. CS str jkt.
4DTW drive w/pedestal, belt driven by 5 HP, 3/60/230/460 volt motor. Mech
seal. Lubricator. 3" dia shaft w/3-blade impellor. Openings: top
12" x 16" manway w/cover and sight glass, 3-2", 1-8",
1-3" sight glass; btm 1-3". (4) legs. (*) |
|
22148 |
350 |
316 SS |
350
gal 316SS vert jkt agit reactor/fermenter. 36" dia x 80" str
side, clamp dish top, weld dish btm. Mfd by Chemap, NB #73, SN 9-1389. Int
rated 35 psi/full vac @ 266 deg F, jkt rated 35 psi @ 266 deg F. SS jkt.
Agit drive, belt driven by 25 HP, 3/60/230/460 volt, 1760 rpm TEFC motor.
Btm entering agit, (3) 6-blade flat turbines. Openings: top 1-6",
2-4", 1-4 1/2", 2-2", 1-1 1/2"; side 6-1 1/18";
btm 1-10" for agit, 1-3". Vessel on 24" skirt. Vessel and
motor on 59" x 115" skid. |
|
22150 |
350 |
316 SS |
350
gal 316SS vert jkt agit reactor. 48" dia x 42" str side, weld
dish top and btm. Mfd by American Boiler, Tank and Welding Co, SN H-10041,
blt 1988. Int rated 75 psi @ 190 deg F, jkt rated 90 psi @ 190 deg F. CS
jkt on str side only. Flange mtd Lightnin agit drive, Mdl XJD9-65, SN
8B-358614, 350 rpm output. Str thru design on 6" nozzle. Direct
coupled to 2 HP, 3/60/230/460 volt motor. Mech seal. Openings: top
2-2", 1-12", 1-3"; 2" center btm outlet. (4) legs.
|
|
22151 |
350 |
316 SS |
350
gal (1500 liter) 316SS agit jkt reactor. 1220mm dia x 1060mm str side,
bolt dish top, weld dish btm. W/anchor agit. Packing gland on shaft.
Driven by Reeves varispeed drive w/Ruba Type 332-C-15 gear reducer,
70-11.5 rpm output speed. Openings: top 400mm x 300mm manway w/2-75mm
sight glasses, 2-200mm, 5-100mm; btm 1-150mm. |
|
22152 |
370 |
316L SS |
370
gal 316LSS vert jkt agit reactor. 45" dia x 48" str side, bolt
dish top, weld dish btm. Mfd by Ind Alloy Fab, NB #3014 (for jkt only), SN
#F710-1. Int rated 15 psi @ 250 deg F (-20 min); jkt rated 187 psi @ 250
deg F (-20 min). 304LSS dimple jkt covered w/SS shroud. Electrpolished
internals. Mtd offset Ekato Mel EM040 agit drive, driven by .6/1.2 HP,
3/60/460 volt, 850/1700 rpm motor. 3-blade propellor. Packing gland. Has
(1) baffle on sidewall. Openings: top 3-3", 1-8" w/cover,
1-5" w/light, 2-1 1/2"; btm 1-2", 1-1/2" threaded. (4)
lugs. |
|
22161 |
400 |
304 SS |
400
gal 304SS (polished) vert jkt agit reactor. 40" dia x 72" str
side, weld dish top and btm. Mfd by Tolan, SN 5867, NB #1066. Int rated 60
psi/full vac @ 400 deg F, jkt rated 150 psi @ 400 deg F. Shell .187"
thick, jkt .109" thick. Chemineer Mdl #2HTNA-10 agit drive, 230/76
rpm output. Driven by 10 HP, 3/60/230/460 volt TEFC motor. Mech seal. (4)
baffles, (2) 6-blade paddle agitators. Openings: top 16" x 12"
manway w/cover, 4-1", 1-1 1/2", 1-4" sight glass. |
|
22162 |
400 |
316 SS |
400
gal 316SS reactor. 37 3/8" ID x 75" tangent to tangent, weld
dish top and btm. Mfd by Roben, ASME, NB #177, SN 60014. Rated for 40 psi
@ 350 deg F int, 65 psi @ 350 deg F jkt. Equipped w/10 HP gear reducer
drive, varispeed. Belt driven by 5 HP, 3 phase, 60/50 cycle, 208/220/440
volt, 1760/1465 rpm TEFC motor. W/mech seal. Has double turbine agit and
(4) baffles. Openings: top 12" x 16" oval manway w/cover on
davit, 3" sight glass, 1-2", 2-1"; str side 2-1",
2-3/8"; 2" center btm outlet. |
|
22163 |
400 |
316 SS |
| |
