SS Reactors 1,000-2,499 Gal. |
  |
|
Item
No: |
Capacity |
Material |
Description: |
|
22235 |
1000 |
304 SS |
1,000
gal 304SS vert jkt agit reactor. 54" dia x 8'8" str side, weld
dish top and btm. Mfd by Alloy Fab, NB #489, SN 1264. Int rated 30 psi/full
vac @ 350 deg F, jkt rated 100 psi @ 350 deg F. 12 gauge Inconel dimple
jkt. Shell .250" thick, head .1875" thick, jkt .109" thick.
Lightnin Mdl 83-S-15 drive, SN 75/6918777, rated 15 HP, 7.79:1 ratio, 230
rpm output, thru 15 HP Allispeed drive, 15 HP, 3/60/230/460 volt motor.
Mech seal. 2-blade str paddle, (4) baffles on wall. Openings: top
1-16" w/cover on davit (swing bolt closure), 4-1", 4-2",
1-4" sight glass; btm 1-2", 1-1 1/2"; btm side 6-1
1/2". (4) lugs. |
|
22242 |
1000 |
304 SS |
1,000
gal Pfaudler 304SS vert reactor. 5' dia x 7' str side. Full CS jkt. 7 1/2
HP drive, UL label, w/mech seal, no shaft. Openings: top 12" x
16" manway w/bolted cover, 2-3", 1-6", 1-7",
2-2"; 1-3" center btm outlet. 1/4" thick x 8" wide
support ring. Rated 200 psi @ 450 deg F int, 15 psi @ 450 deg jkt. |
|
22243 |
1000 |
304 SS |
1,000
gal Pfaudler 304SS vert reactor. 5' dia x 7' str side. SN E63511, ASME
#3574. Int rated 200 psi @ 450 deg F, jkt rated 15 psi @ 450 deg F. Full
CS jkt with 1/4" x 8" support ring. 7.5 HP drive, UL label.
Openings: top 12" x 16" manway, 2-3", 1-6", 1-7",
2-2"; 3" center btm outlet. SS shaft w/(2) sets of 3-blades.
Mech seal on shaft. |
|
22244 |
1000 |
304 SS |
1,000
gal Struthers Wells 304SS jkt vert reactor. 5' dia x 7' str side. SN
70545-27, NB #1133. Int rated 200 psi @ 400 deg F, jkt 15 psi @ 400 deg F.
Full CS jkt with 1/4" x 8" support ring. 7.5 HP drive, UL label.
Openings: top 12" x 16" manway, 2-3", 1-6", 1-7",
2-2"; 3" center bottom outlet. SS shaft w/(2) sets of 3-blades.
Mechanical seal on shaft. |
|
22246 |
1000 |
304 SS |
1,000
gal Pfaudler 304SS vert reactor. 60" dia x 7' str side, welded dished
top and btm. SN E63500. Jkt rated 15 psi @ 350 deg F, int rated 200 psi @
350 deg F. CS jkt with 1/4" x 8" support ring. Unit has 7.5 HP,
3/60/580 volt, 1740 rpm XP motor belt driving a propellor agit. 1-4"
btm outlet. |
|
22248 |
1000 |
304 SS |
1,000
gal 304 SS vert reactor. 5' dia x 7' str side, dish heads. 304 SS dimple
jkt. (2) sets 4-blade 42" dia turbine agitator. Openings: 18"
top manway, 1-8", 1-6", 4-2" top outlets; 3" center
btm outlet. No drive. Mfd by Whiting Eng Inc. |
|
22249 |
1000 |
304 SS |
1000
gal 304SS reactor w/3" dia int coils. 66" dia x 6' str side,
welded dish top and btm. Mfd by Cryochem, SN 161, NB #161. Int rated 40
psi @ 350 deg F, coil rated 50 psi @ 350 deg F. Unit has top entering
Lightnin agit drive w/25 HP @ 1750 rpm, 3/60/220/440 volt motor, UL label.
Stuffing box. Reinforced top head. 1/4" head thickness, 3/16"
shell. Openings: top 1-4", 1-2", 4-1", 2-3",
1-16" manway w/cover; 3" center btm outlet. Tank mtd on (4)
legs. |
|
22251 |
1000 |
304 SS |
RECONDITIONED
1,000 gal 304SS vert jkt reactor. 5' dia x 7' str side, weld dish top and
btm. Mfd by Struthers Wells, SN 71355-2, NB #1232. Int rated 200 psi @ 650
deg F, jkt rated 15 psi @ 650 deg F. Full CS jkt. W/SS 3-blade retreat
curve agit driven by 10 HP, 3/60/230/460 volt motor and reducer. Mech
seal. Openings: top 15" x 11" manway with bolted cover,
2-6", 2-2", 2-3"; btm 1-3". W/(4) CS legs. (*) |
|
22255 |
1000 |
304 SS |
RECONDITIONED
1,000 gal 304SS vert jkt reactor. 5' dia x 7' str side, weld dish top and
btm. Mfd by Struthers Wells, SN 92843-1, NB #275. Int rated 200 psi @ 400
deg F; jkt rated 30 psi @ 400 deg F. Full CS jkt. W/SS 3-blade retreat
curve agit, driven by 10 HP, 3/60/230/460 volt motor and reducer. Mech
seal. Oepnings: top 15" x 11" manway, 2-6", 1-2",
1-3"; btm 1-3". (*) |
|
22256 |
1000 |
304 SS |
1,000
gal 304SS vert jkt reactor. 5' dia x 7' str side, weld dish top and btm.
Full CS jkt. W/SS 3-blade retreat curve agit (no motor). Mech seal.
Openings: top 15" x 11" manway, 3-6", 1-2", 1-3";
btm 1-3". |
|
22257 |
1000 |
304 SS |
1,000
gal 304SS vert jkt reactor. 5' dia x 7' str side, weld dish top and btm.
Full CS jkt. W/SS 3-blade retreat curve agit driven by 10 HP, 3/60/230/460
volt motor and reducer. Mech seal. Openings: top 15" x 11"
manway, 2-6", 1-2", 1-3"; btm 1-3". |
|
22262 |
1000 |
304 SS |
1,000
gal 304SS clad vert jkt reactor body. 60" dia x 72" str side,
weld dish top and btm. Mfd by Struthers Wells, SN 72508. Int rated 75 psi,
jkt rated 125 psi. Str jkt. (3) rows of interior clips for baffle
attachment. Openings: top 16" x 12" manway w/hinged cover
w/4" opening, 2-8", 1-6", 2-4", 3-3", 1-2",
3-1"; side 2-1"; btm 1-5 1/2". Frame |
|
22264 |
1000 |
304 SS |
1,000
gal 304SS vert jkt agit reactor. 66" dia x 70" str side, weld
dish top and btm. Mfd by Norwalk Fab. Int rated 15 psi/full vac @ 300 deg
F; jkt rated 50 psi @ 300 deg F. Chemineer agit drive, Mdl 2HTA-5, output
100 rpm. Driven by 5 HP, 3/60/220/440 volt motor. Packing gland. Openings:
top 1-18" manway, 1-6", 2-2", 1-1"; btm 1-2". Mtd
on (4) lugs. |
|
22268 |
1000 |
304 SS |
Approx
1,000 gal 304SS vert jkt agit reactor. 54" dia x 96" str side,
weld dish top and btm. Mfd by Alloy Fab, SN 503. Int rated full vac/atmospheric
@ 350 deg F; jkt rated 90 psi @ 350 deg F. 304SS dimple jkt on str side
only. Shell .140" thick, jkt .109" thick. Lightnin Mdl 931X142
agit drive, 100 rpm output. Driven by 3 HP, 3/60/230/460 volt, 1750 rpm
motor. 4-blade pitched paddle agit. Openings: top 1-18" w/cover,
2-2", 2-1 1/2", 1-4"; btm 1-2". Mtd on (4) lugs.
|
|
22269 |
1000 |
304 SS |
1,000
gal 304SS vert jkt reactor body. 66" dia x 60" str side, weld
dish top and btm. Full CS jkt. Pedestal for drive mount. Packing gland.
(2) 6" fixed baffles, 3-blade pitch paddle agit. Openings: top
1-15" w/cover, 2-2", 3-1 1/2", 1-6", 1-4" sight
glass; 1-4 1/2" center btm outlet. Designed for lugs. |
|
22250 |
1000 |
304ELC SS |
1,000
gal vert 304ELC SS shell, 304SS dimple jkt base reactor. 66" dia x 5'
str side, weld dish top and btm. Mfd by Tolan. Int rated 15 psi/full vac,
jkt rated 90 psi. W/(2) 4-paddle flat turbine agitators on a common
3" shaft. No drive w/unit. Openings: top 1-18" w/cover,
2-1", 3-1 1/2", 1-3" sight glass; btm 1-1 1/2". Shell
thickness 3/16". |
|
22241 |
1000 |
304L SS |
1,000
gallon 304LSS reactor/crystallizer. 66" diameter x 66" straight
side, welded dished top, 42" cone bottom. Has /2 pipe jacket on
bottom coil. Manufactured by Kodak, National Board #386, Serial #86.
Internal rated 27.5 psi @ 350 degree F, 1/2 pipe coil jacket rated 100 psi
@ 350 degree F. Chemineer drive, Model #5HTN-15, Serial #107336-1, 45/23
rpm output. 15/3.75 HP, 3/60/220/440 volt, 1200/800 rpm motor. Mechanical
seal. (2) sets of 2-blade straight agitators and (1) set of 2-blade screen
agitator. Openings: top 1-18" with cover, 1-8", 3-2",
1-3"; bottom 1-3". (4) legs. |
|
22247 |
1000 |
304L SS |
1,000
gal 304 LSS clad vert reactor. 6' dia x 4'6" str side, welded dish
top and btm. Mfd by Superior Welding Co, NB #1002. Jkt rated 50 psi @ 300
deg F, internal rated 150 psi @ 300 deg F. W/4-blade pitched paddle
agitator driven by Mdl MAP-30-231 Chemineer drive rated input rpm 1750,
ratio 31.4:1, output rpm 56, no motor. Packing gland on shaft. Openings:
top 5-6", 1-18" manway (no cover); side 1-4"; btm
1-6", 1-2". Mounts on (4) lugs. |
|
22237 |
1000 |
316 SS |
1,000
gal 316SS vert jkt agit reactor. 60" dia x 72" str side, weld
dish top and btm. Mfd by Perry, SN A7734-D. Int rated 75 psi @ 365 deg F,
jkt rated 90 psi @ 365 deg F. 2-zone 304SS dimple jkt (str side and btm).
Lightnin Mdl 216TESS agit drive, SN 6811722, rated 5 HP, 14.09:1 ratio,
125 rpm output. Direct coupled to 5 HP, 3/60/230/460 volt, 1745 rpm TEFC
flameproof motor, Frame #184T. Mech seal. 4-blade str pitched agit,
2" dia w/30" span. Shell 5/16" thick with 3/8" top and
btm heads, jkt .104" thick. Tank has (4) welded baffles inside.
Openings: top 12" x 16" w/hinged cover, 1-8" center agit
opening, 4-2", 1-1 1/2"; 3" center btm outlet. (4) sockets.
|
|
22238 |
1000 |
316 SS |
****1,000
gal 316SS horiz jkt reactor. 54" ID x 116" long, flat heads. Mfd
by Vickers-Zimmer (Germany), SN 49641 and 49642. Jkt fully, including both
heads. Int rated 15 psi and full vac, jkt rated 42 psi @ 550 deg F.
Furnished w/(4) 2 HP, 460 volt gearhead agit drives, w/mech seals and
3-blade propellors, approx 300 rpm. Openings: top 1-24" manway,
1-8", 6-3", 1-2"; 3" btm outlet. Mtd on steel saddles
and skid. |
|
22239 |
1000 |
316 SS |
1,000
gallon 316SS sanitary vertical jacketed agitated kettle. 7'6"
diameter x 18" straight side, open top with loose cover, hemi-dished
bottom. Manufactured by Lee Metal, Serial #A-4920, National Board #2122.
Jacket rated 15 psi at 250 degrees F. #4 finish inside and #4 finish
outside where applicable. Sanitary flanged rim. 316SS bridge mounted with
counter rotating agitator. Manufactured by Sterling Speed Trol varidrive,
Serial #77-3713, 190 rpm output. No gland or seal. 15 HP, 3/60/230/460
volt, 1800 rpm motor. Openings: 3" center flush bottom outlet with
sanitary ball valve. (4) legs 42" high. |
|
22259 |
1000 |
316 SS |
****1,000
gal 316SS horiz jkt reactor. 54" ID x 116" long, flat heads. Mfd
by Vickers-Zimmer (Germany), SN 49641 and 49642. Jkt fully, including both
heads. Int rated 15 psi and full vac, jkt rated 42 psi @ 550 deg F.
Furnished w/(4) 2 HP, 460 volt gearhead agit drives, w/mech seals and
3-blade propellors, approx 300 rpm. Openings: top 1-24" manway,
1-8", 6-3", 1-2"; 3" btm outlet. Mtd on steel saddles
and skid. |
|
22260 |
1000 |
316 SS |
1,000
gal 316SS vert jkt agit reactor. 66" dia x 36" str side, bolt
dish top, hemi-btm. Mfd by Alpha, SN 983. Int rated 30 psi/full vac, jkt
rated 290 psi. 304LSS 1/2 pipe coil jkt. Bridge mtd gear drive, belt
driven by approx 30 HP motor. Packing gland. Anchor agit and thermowell.
Openings: top 1-16" manway w/swing bolt cover, 3-2", 1-10",
1-6"; btm 1-2". (4) mounting lugs. |
|
22261 |
1000 |
316 SS |
1,000
gal 316SS vert jkt agit reactor. 5' dia x 6'4" str side, weld dish
top and btm. Full carbon steel jacket. Flange mounted, right angle design,
Lightnin agit drive, 17.1:1 ratio, 100/33 rpm output. Driven by 3 HP,
3/60/220/440 volt, 1750 rpm motor. W/variable speed sheave. Mech seal.
Openings: top 12" x 16" w/cover, 3-1 1/2", 2-2",
1-5" sight glass; btm 1-1 1/2". (4) legs. (Not to be used for
products of human consumption except pencillin). |
|
22263 |
1000 |
316 SS |
1,000
gal (4000 liter), 316SS vert jkt agit reactor. 70" (1800mm) dia x
64" str side, weld dish top and btm. Mfd by Bayer AG, SN 1995, blt
1985. Internal rated 6 bar and full vacuum @ 300 degrees C, jacket rated
18 bar @ 300 degrees C. Bottom jacket half pipe coil, rated 60 bar.
Equipped with Ekato type EMO80 agitator drive, 11 to 110 RPM output speed.
Mechanical seal on shaft. Stub shaft only, requires agitator. (4) internal
SS baffles on side walls. Openings: Top- 1-600 mm manway with cover, 1-300
mm, 1-150 mm sight glass, 3-80 mm, 7-50 mm; Coil jacket openings: 4-50mm,
4-62mm, 4-38mm, 1-25mm; Bottom: 1-175mm, 1-80 mm. All top openings are
jacketed. (4) legs. |
|
22265 |
1000 |
316 SS |
1,000
gal (4000 liter) 316SS (1.4571) agit jkt reactor. 1800mm dia x 1500mm str
side, weld dish heads. Mfd by Kolk, SN 2041. Int rated 6.2 bar and full
vac, jkt rated 6.2 bar @ 200 deg C. W/1000mm gate style agit. Packing
gland on shaft. Openings: top 1-450mm manway, 1-250mm, 4-150mm, 4-100mm.
Lugs for mounting. |
|
22266 |
1000 |
316 SS |
1,000
gal (4000 liter) 316SS (1.4571) agit jkt reactor. 1800mm dia x 1250mm str
side, bolt dish top, weld dish btm. Mfd by Kosik. Int rated 6.2 bar, jkt
rated 6 bar. CS dimple jkt. W/Rhenania agit drive, Type SVH7. Packing
gland on shaft. Driven by 5 KW, 3/50/500 volt, 1430 rpm motor. Openings:
top 1-500mm manway w/cover, 1-200mm, 1-150mm, 6-100mm; no btm outlet.
|
|
22267 |
1000 |
316 SS |
1,000
gal (4000 liter) 316SS (1.4571) agit jkt reactor. 1800mm dia x 1226mm str
side, weld dish heads. Mfd by Samesreuther, SN D-4753. Int rated 6.2 bar
and full vac, jkt rated 6.2 bar @ 200 deg C. W/dip pipe for discharge,
150mm dia. Equipped w/anchor agit, 1200mm dia. Openings: top 1-450mm
manway w/cover, 1-200mm, 2-150mm, 5-100mm. Mtd on legs, 200mm dia. |
|
22236 |
1000 |
316 SS/TI |
1,000
gal (4000 liter) all 1.4571 (316SS/TI) agit jkt autoclave/reactor. 1600mm
dia x 1865mm str side, weld dish heads. Mfd by TH Winkels, SN 11806. Int
rated 16 bar and full vac @ -15/+250 deg C, jkt rated 120 bar @ -15/+325
deg C. Half pipe coil jkt. Equipped w/anchor agit. Mech seal on shaft,
driven by 6.8 KW, 3/50/400 volt, 1455 rpm motor w/Kestermann Type VKS250,
7.5 PS agit drive, w/Lenze variable speed gear 53-116 rpm output speed.
Openings: top 1-500mm manway w/cover and davit, 6-150mm, 1-250mm; 1-100mm
center btm outlet. Overall height 2720mm. Mounting ring. Designed to
German TUV standards. |
|
22240 |
1000 |
316L SS |
1,000
gallon 316LSS vertical jacketed agitated reactor. 60" diameter x
78" straight side, welded dished top and bottom. Manufactured by
Gaston County Fab, Serial #F80614-689-1, National Board #20867, built
1990. Internal rated 75 psi and full vacuum @ 400 degree F (-20 degree F
minumim); jacket rated 150 psi @ 400 degree F (-20 degree F minimum). SS
1/2 pipe jacket. Pfaudler 5RW drive, Model FDWV-50500-BJD, Serial
#5-01624P, 10:1 ratio, 1750 rpm output. Belt driven by 10 HP, 3/60/230/460
volt, 1725 rpm flameproof motor. Mechanical seal. Has 316LSS 3-blade
retreat curve agitator 3 1/2" diameter x 119" long, with 3"
diameter x 82" long 316LSS thermowell. Openings: top 1-18" with
bolt cover and 6" handway, 4-4", 2-3"; 1-4" center
bottom outlet. (4) lugs and (4) couplings for pipe legs. |
|
22258 |
1000 |
316L SS |
1,000
gal vert 316LSS jkt reactor. 5' dia x 6'3" str side, weld dish top
and btm. Mfd by CB&T Co, SN F9379-1, NB #297. Int rated 60 psi @ -40
deg F, jkt rated 50 psi. Full CS jkt. 5 HP Lightnin agit drive, Model
#229-TEC-52, with 5 HP TEFC motor, 47:1 ratio, 37 rpm output. Flat turbine
agit. Packing gland. Openings: top 1-18", 5-2", 5-3"; btm
1-3". |
|
22270 |
1000 |
316L SS |
1,000
gal 316LSS vert jkt agit reactor. 5' dia x 6' str side, weld dish top and
btm. Mfd by Fesco, NB #441, SN 441. Int rated 25 psi/full vac @ 350 deg F;
jkt rated 125 psi @ 350 deg F. 304SS 1/2 pipe coil jkt on straight side
and bottom head. Lightnin Mdl 218-REC-7.52 agit drive, rated 7.5 HP,
17.1:1 ratio, 100/33 rpm output. Belt driven with variable speed sheave to
7 1/2 HP, 3/60/220/440 volt, 1750 rpm TEFC motor. 4 blade pitch paddle
agitator. Packing gland. (4) baffles. Openings: top 1-18" w/cover,
1-6", 4-2", 2-4", 1-12"; btm 1-3". (4) legs. |
|
22252 |
1000 |
321 SS |
1,000
gal 321SS vert jkt reactor. 5' dia x 7' str side, weld dish top and btm.
Mfd by Struthers Wells, SN 92843-16, NB #290. Int rated 200 psi @ 400 deg
F, jkt rated 30 psi @ 400 deg F. Full CS jkt. W/SS 3-blade retreat curve
agit driven by 10 HP, 3/60/230/460 volt motor and reducer. Mech seal.
Openings: top 15" x 11" manway, 2-6", 1-2", 1-3";
btm 1-3". |
|
22253 |
1000 |
321 SS |
1,000
gal 321SS vert jkt reactor. 5' dia x 7' str side, weld dish top and btm.
Mfd by Struthers Wells, SN 92843-3, NB #277. Int rated 200 psi @ 400 deg
F, jkt rated 30 psi @ 400 deg F. Full CS jkt. W/SS 3-blade retreat curve
agit driven by 10 HP, 3/60/230/460 volt motor and reducer. Mech seal.
Openings: top 15" x 11" manway, 2-6", 1-2", 1-3";
btm 1-3". |
|
22254 |
1000 |
321 SS |
1,000
gal 321SS vert jkt reactor. 5' dia x 7' str side, weld dish top and btm.
Mfd by Struthers Wells, SN 92843-10, NB #284. Int rated 200 psi @ 400 deg
F, jkt rated 30 psi @ 400 deg F. Full CS jkt. W/SS 3-blade retreat curve
agit driven by 10 HP, 3/60/230/460 volt motor and reducer. Mech seal.
Openings: top 15" x 11" manway, 2-6", 1-2", 1-3";
btm 1-3". |
|
22245 |
1000 |
SS |
****
1,000 gal Struthers Wells vert agit nickel clad reactor. 60" ID x
60" str side, weld dish heads. Full CS jkt. Has shaft w/3-blade
impellor. Packing gland on shaft. (4) baffles on wall. Driven by 20 HP
Falk gear reducer. Openings: top 18" manway (no cover), 4-4";
4" center btm outlet. |
|
22271 |
1100 |
316 SS |
1,100
gal 316SS clad, polished (except for baffle bracket), vert jkt agit
reactor/autoclave. 66" dia x 54" str side, weld hemi-top, weld
hemi-btm. Mfd by Blaw Knox. Int rated 2000 psi @ 400 deg F, jkt rated 150
psi @ 400 deg F. Full CS jkt. (8) turns 3" int pipe coil. Right angle
Lightnin Mdl #86-S-75 agit drive, SN 92A7774201, rated 60 HP, 11.6:1
ratio, 155 rpm output. Direct coupled to 60 HP, 3/60/230/460 volt, 1775
rpm motor, UL label. Mech seal. Has (1) 4-blade pitch paddle agit and (2)
6-blade flat turbine agit. (4) welded baffles. Openings: top 4-2",
1-1", 1-16" w/bolt cover, 3-1 1/2"; 4" center btm
outlet. (4) legs. |
|
22272 |
1100 |
316 SS |
1,100
gal 316SS vert jkt agit reactor. 5'6" dia x 5'6" str side, weld
dish top and btm. Lightnin Mdl 73-C-10 agit drive, SN 734323, 16.8:1
ratio, 100 rpm output. Direct coupled to 10 HP, 3/60/230/460 volt, 1755
rpm TEFC motor. Packing gland. Has 6-blade flat turbine agit. Shell
.400" thick, head .200" thick. Openings: top 4-2",
1-6", 1-16" w/swing bolt cover on hinges; btm 1-4". Cut
legs. |
|
22273 |
1150 |
316 SS |
1,150
gal 316SS reactor. 63" ID x 4'10" seam/seam, dish top, cone btm.
ASME Code stamped for 325 psig and full vac int @ 650 deg F. 304SS jkt 60
psig @ 650 deg F. Int coil 60 psi, 82 sq ft, 3" vert tubes, 150 HP
Phila PTE-24 agit. Eddy current clutch 15-150 rpm gate type agit. Multiple
top openings, 3" center btm outlet. |
|
22274 |
1150 |
316 SS |
1,150
gal 316SS reactor. 63" ID x 4'10" seam/seam, dish top, cone btm.
ASME Code stamped for 325 psig and full vac int @ 650 deg F. 304SS jkt 60
psig @ 650 deg F. Int coil 60 psi, 82 sq ft, 3" vert tubes, 150 HP
Phila PTE-24 agit. Eddy current clutch 15-150 rpm gate type agit. Multiple
top openings, 3" center btm outlet. |
|
22275 |
1200 |
316 SS |
1,200
gal 316SS reactor. 6' dia x 5'8" str side, weld dish heads. Jkt rated
6 bar, in t rated 6 bar. Has top mtd agit drive w/packing gland on shaft.
Driven by flange mtd approx 5 HP motor. Flat blade paddle agit. Openings:
top 8-6", 1-12", 1-20" w/cover and (2) sight glasses mtd on
davit; side 2-3". 1,200 gal 316SS reactor. 6' dia x 5'8" str
side, weld dish heads. Jkt rated 6 bar, int rated 6 bar. Has top mtd agit
drive w/packing gland on shaft. Driven by flange mtd approx 5 HP motor.
Flat blade paddle agit. Openings: top 8-6", 1-12", 1-20"
w/cover and (2) sight glasses mtd on davit; side 2-3". |
|
22277 |
1200 |
316 SS |
1,200
gal (1000 Imperial gal, 4500 liters) 316SS vert jkt agit reactor w/int
coils. 76" (1930mm) dia x 66" (1675mm) str side, bolted dish
top, weld di |
|
22276 |
1200 |
321 SS |
1,200
gal (1000 Imperial gals) 321SS vert jkt agit reactor. 5' dia x 6'6"
str side, weld dish top, 2'10" cone btm. Mfd by J Adamson. Int rated
80 psi @ 120 deg F, coil rated 313 psi @ 68 deg F. Ayton agit drive, 10:1
ratio, 83 rpm output w/15 HP, 1440 rpm motor. Mech seal. (2) 6-blade
paddle agitators. Openings: top 1-6", 5-3", 4-2"; btm
2-2", 1-3", 1-4". (4) lugs. |
|
20601 |
1200 |
SS |
One Used REACTOR, SS, 1200 G,
DESIGN: 150 LB @ 600 F, VERT, 63 IN DIA, NB: 3370, W/PLATE, NORWALK
FABRICATORS |
|
22278 |
1250 |
304 SS |
1,250
gallon 304SS vertical jacketed agitated reactor. 66" diameter x
78" straight side, welded dished top and bottom. Manufactured by
Eastman Kodak, Serial #PV6991. Internal rated 50 psi and full vacuum @ 280
degree F, jacket rated 35 psi and full vacuum @ 280 degree F. Conventional
CS jacket on straight side and bottom head. Flange mounted on angle,
Lightnin Model N33G agitator drive, Serial #701435, rated .5 HP, 350 rpm
output. Direct coupled to 1/2 HP, 3/60/230/460 volt, 1725 rpm flameproof
motor. Packing gland. Openings: top 1-18" bolt cover, 4-2";
bottom 1-2". Lugs. |
|
22279 |
1300 |
304 SS |
1,300
gal 304SS vert jkt reactor body. 60" dia x 102" str side, bolt
dish top, weld dish btm. 4-zone CS jkt on 2/3 of str side and btm head.
(11) turns of 3" SS int coil. Openings: top 1-18" (no cover),
1-3" center (w/agit shaft only), 2-3", 3-2", 1-4"
sight glass; side 2-2", 14" x 16" (no cover). (3) lugs.
|
|
22280 |
1300 |
304 SS |
1,300
gal vert 304SS reactor. 60" dia x 7'6" str side, weld dish top
and btm. Full CS jkt. Unit has (2) 6-blade flat turbine agitators on
common shaft. Belt driven Lightnin Mdl #219-TEC-5.2 agit drive, SN 676038,
output rpm 28/84, 20.9:1 ratio. W/316SS agit shaft 2" dia x 30"
overall length w/4" dia flange w/(4) 7/8" dia holes. Packing
gland. Openings: top 1-16" manway w/cover, 1-4", 3-2",
1-3", 1-10" center for agit; btm 2-1 1/2", 1-3",
1-2". |
|
22281 |
1340 |
304 SS |
1,340
gal vert 304SS reactor. 66" dia x 7' str side, weld dish top and btm.
Mfd by R Jenkins, SN ES52681. Jkt rated 50 psi @ -45 to 256 deg C, 103 psi
test; int rated 60 psi/full vac @ -45 to 256 deg C, 124 psi test. Full CS
jkt. Blt to ASME VIII Code. Top mtd Lightnin drive Mdl 20TEDS, 20:1 ratio,
60 rpm output. Direct coupled to 5 HP, 3/60/415 volt, 1435 rpm flameproof
motor. Mech seal on shaft. 2 1/2" dia shaft w/6-blade disk turbine.
Openings: top 1-17" manway (no cover), 4-4", 3-3",
5-2"; 1-6" center btm outlet, 2-4" btm outlets. Unit mtd on
(4) lugs. |
|
22283 |
1400 |
304 SS |
1,400
gal 304SS vert jkt reactor. 72" dia x 75" str side, weld dish
top and btm. Lightnin Mdl 74-C-10 agit drive, rated 10 HP, 25.7:1 ratio,
68 rpm output, no motor. Packing gland. (4) baffles on wall. Openings: top
1-36" center for drive mount, 2-1", 4-1 1/2", 1-3",
2-4" sight glasses; side 1-3"; btm 1-2 1/2". (4) lugs
w/legs. |
|
22282 |
1400 |
304L SS |
1,400
gal 304LSS vert jkt agit reactor. Mfd by Alloy Fab, NB #431, SN 1176. Int
rated 75 psi @ 300 deg F, jkt rated 50 psi @ 300 deg F. Foote Bros agit
drive, 31.4:1 ratio, 56 rpm output. Belt driven by 40 HP, 3/60/220/440
volt, 1800 rpm motor. Triple ribbon helical. W/SS flush btm valve. |
|
22289 |
1500 |
304 SS |
1,500
gal 304SS reactor body. 5'4" dia x 8' str side, welded dish top and
btm. Mfd by Nolte, NB #607. Full CS jkt. Unit rated 35 psi @ 300 deg F in
jkt; 56 psi @ 300 deg F int. (6) vert sets of heated baffles. Each baffle
has (6) 1 1/2" dia lengths of coil. Openings: top 1-10",
2-4", 2-2", 14" x 18" manway w/cover, 1-6" in
cover, 1-16" center pad for drive; side (12) 2 1/2" for coils,
5-1"; btm 1-2 1/2" outlet. Mtd on (4) 36" legs. |
|
22291 |
1500 |
304 SS |
1,500
gal 304SS vert reactor. 5' dia x 10'6" str side, weld dish top and
btm. Mfd by Thompson Horsley Ltd, SN KS709. Jkt rated 60 psi @ 200 deg F,
60 psi w/full vac int; int rated 40 psi/full vac @ 167 deg F. Full CS jkt.
Top mtd Lightnin mixer, 3 HP, 3/50/415 volt, Mdl 82-S-3, rated 21.2:1
ratio, 68 rpm output. Mech seal on shaft. (2) 4-blade pitched paddle
turbines. (4) baffles on sidewall. Openings: top 2-8", 4-2 1/2",
1-2", 1-36" w/cover and 1-18" (no cover); btm 1-4"
outlet. |
|
22292 |
1500 |
304 SS |
****
1,500 gal (6000 litre) 304SS clad reactor. 1.6m dia x 2.695m str side,
bolt top, weld dish btm. Mfd by Fried Krupp (Germany), SN 168-2280. Jkt
rated 3 ATU, int rated 12.8 ATU. W/17.5 KW, 3/50/380 volt, 1450 rpm vert
flanged motor connected to gear reducer. Gate style agit 850mm wide x 1.4m
long. Mech seal on shaft. Openings: top 2-150mm, 2-100mm; 1-100mm center
btm outlet. |
|
22293 |
1500 |
304 SS |
****
1,500 gal (6000 litre) 304SS clad reactor. 1.6m dia x 2.695m str side,
clamp top, weld dish btm. Mfd by Huls (Germany), SN 1700. Jkt rated 3 bar,
int rated 15 bar. W/17.5 KW, 3/50/380 volt, 1450 rpm vert flanged motor
connected to gear reducer. Gate style agit 850mm wide x 1.4m long. Mech
seal on shaft. Openings: top 2-50mm, 1-75mm, 1-100mm; 1-100mm center btm
outlet. Lugs for mounting. |
|
22294 |
1500 |
304 SS |
****1,500
gal vert 304SS reactor. 6' dia x 6'6" str side, weld dish top and btm.
Mfd by Chattanooga Boiler and Tank, NB #295, SN F9378. Int rated 60 psi @
-40 deg F to 250 deg F, jkt rated 90 psi @ 330 deg F. Flange mounted,
right angle design 7.5 HP Lightnin drive, Model #218-TEC-7.5, Serial
#603591, 100 rpm output. Packing gland. 6-blade flat turbine agit.
Openings: top 1-20", 4-2", 2-4", 2-3"; btm 1-3". |
|
22295 |
1500 |
304 SS |
1,500
gal 304SS vert jkt agit reactor. 72" dia x 6'6" str side, weld
dish top and btm. Mfd by Tolan, SN 6195, NB #1300. Int rated 50 psi @ 400
deg F, jkt rated 150 psi @ 400 deg F. Str jkt. Lightnin Mdl N33G-200 agit
drive, rated 2 HP, ratio 1:5, 350 rpm output. Direct coupled to 2 HP,
3/60/230/460 volt, 1750 rpm motor, UL label. Packing gland. Shell
5/16" thick, heads 1/4" thick, jkt 0.103" thick. Jkt
insulated and SS shroud. Openings: top 3-2", 1-16" w/manway and
cover, 1-4"; btm 1-3". No lugs or legs. |
|
22284 |
1500 |
316 SS |
1,500
gal 316SS vert jkt reactor body. 78" dia x 70" str side, weld
dish top and btm. Mfd by Pfaudler, SN R359-0794, NB #14828. Int rated 75
psi @ 365 deg F; jkt rated 150 psi @ 365 deg F. CS dimple jkt. Openings:
top 1-18", 3-2, 2-4", 1-8", 1-6" center; btm
1-3". (6) legs and (4) lugs. |
|
22290 |
1500 |
316 SS |
****
1,500 gal 316SS vert dimple jkt reactor. 6' dia x 6'6" str side, weld
dish top and btm. Mfd by Alloy Crafts Co, SN 9065, NB #928. Jkt rated 25
psi @ 270 deg F, int rated 25 psi @ 270 deg F. 304SS dimple jkt on str
side and btm head. W/6-blade flat turbine agit and (4) baffles on wall.
Agit driven by right angle design Lightnin Mdl #216-REC-10, S# 6712316,
rated 125 rpm output, 14.09:1 ratio w/10 HP, 3/60/230/460 volt, 1750 rpm
motor. Packing gland. Openings: top 1-16", 3-6", 1-3",
2-2"; btm 1-5". Shell thickness .250"; jkt .062". Mtd
on (4) legs. |
|
22287 |
1500 |
316 SS/TI |
6,000
liter 1.4571 (316SS/Ti) vertical agitated jacketed reactor. 2000mm
diameter x 1640mm straight side, welded dished heads. Manufactured by
Metallweerk Friedrickshafen (Germany), Serial #1818. Internal rated 3 ATO
and full vacuum, jacket rated 5 ATO @ 150 degree C. Equipped with 600mm
diameter 6-blade turbine agitator, 90 rpm output speed, on 75mm shaft.
Packing gland. Driven by Ekato Type OL856 agitator drive with Bauer 5.5
KW, 3/50/380/660 volt, 1428 rpm 1P65 ExeG3 motor. With 65mm diameter dip
tube with restricted tip. (4) 5mm thick x 200mm wide x 1400mm long
baffles. Openings: top 1-500mm manway with davit and sight glass, 1-300mm,
1-125mm for light, 8-100mm; 1-150mm bottom outlet. Lugs for mounting.
Designed to German TUV standards. Total capacity 6800 liter. |
|
22288 |
1500 |
316 SS/TI |
6,000
liter 1.4571 (316SS/Ti) vertical agitated jacketed reactor. 2000mm
diameter x 1640mm straight side, welded dished heads. Manufactured by
Metallwerk Friedrickshafen (Germany), Serial #1817. Internal rated 3 ATO
and full vacuum, jacket rated 5 ATO @ 150 degree C. Equipped with 600mm
diameter 6-blade turbine agitator, 90 rpm output speed, on 75mm shaft.
Packing gland. Driven by Ekato Type DE856 agitator drive with Bauer 5.5
KW, 3/50/380/660 volt, 1428 rpm 1P65 Exe G3 motor. With 65mm diameter dip
tube with restricted tip. (4) 5mm thick x 200mm wide x 1400mm long
baffles. Openings: top 1-500mm manway with davit and sight glass, 1-300mm,
1-15mm for light, 8-100mm; 1-150mm bottom outlet. Lugs for mounting.
Designed to German TUV standards. Total capacity 6800 liter. |
|
22285 |
1500 |
316L SS |
1,500
gal 316LSS vert jkt agit reactor. 6'6" dia x 70" str side. Mfd
by D&W Welding, SN 6035, NB #747. Int rated 75 psi/full vac @ 500 deg
F, jkt rated 180 psi @ 500 deg F. 304SS dimple jkt. Pfaudler Mdl EH-12
drive, 14.4:1 ratio, 90 rpm output. Driven by 10 HP, 3/60/220/440 volt,
1760 rpm motor, UL label. Mech seal. Openings: top 1-18" w/cover,
4-2", 1-6", 2-4", 1-1 1/2"; btm 1-3". (6) pipe
legs. Shell 5/16" thick, heads 3/8" thick. |
|
22286 |
1500 |
316L SS |
1,500
gal 316LSS vert, 75 psi agit reactor. 6'6" dia x 5'6" str side,
weld dish top and btm. Mfd by D&W Welding. Int rated 75 psi. W/Lightnin
Mdl N33G-10 drive, 1 HP, 3/60/230/460 volt motor, UL label. Openings: top
1-18" w/cover, 3-2", 2-4", 1-6", 1-1 1/2". (6)
legs. |
|
22296 |
1560 |
316 SS |
1,560
gal (5,900 liters) 316SS clad agit jkt reactor. 1570mm dia x 3250mm str
side, weld dish heads. Mfd by DeDietrich (France), SN 621. Int rated 15
bar @ 100 deg C, jkt rated 7.5 bar @ 95 deg C. Equipped w/(7) sets of
2-blade 45 deg axial flow turbine agitators. Mech seal on shaft. W/agit
drive, Type VZM-07T, Size 100, SN 3711. W/25 HP, 3/50/380 volt, 1450 rpm
motor. Output speed 139 rpm. W/(3) baffles. Mech seal w/powerpak
lubrication. Openings: top 300mm x 500mm manway w/cover, 1-150mm, 1-75mm,
2-50mm, 1-38mm, 1-18mm; side 1-200mm, 1-150mm; btm 1-150mm center. Lugs
for mounting. ASME section VIII Div I stamped. Designed to French
standards. |
|
22297 |
1660 |
304 SS |
1,660
gal (6300 liter) sanitary 304SS kettle. 2300mm dia x 1570mm str side, weld
dish top and btm. Mfd by Cheteborske Stojirn, SN 7939, Type UTAK-63. Jkt
rated 19 bar. Str jkt. Double motion acting gate style agitators. W/sets
of 2-blade turbines bolted on common shaft. Agit drive, Type AP112M-8,
driven by 2.2 KW, 3/50/220/380 volt, 710 rpm motor. Openings: btm 1-50mm.
(4) SS legs. |
|
22298 |
1700 |
316 SS |
1,700
gal (6500 liter) 316SS vert jkt agit reactor body. 79" (2000mm) dia x
67" (1700mm) str side, weld dish top and btm. Mfd by Jos Kunnes and
Son, SN 3154. Int rated 74 psi @ 572 deg F (5 bar @ 300 deg C), jkt rated
220 psi @ 572 deg F (15 bar @ 300 deg C). 1/2 pipe coil 316SS jkt. 77 sq
ft (7.15 sq meter) heating service. No drive. Mech seal. 3.5" (85mm)
dia shaft w/40" (1000mm) wide x 35" (895mm) high 1-blade agit.
Openings: top 1-18" (450mm) manway w/cover, 7-4" (100mm);
1-4" (100mm) center btm outlet. Mounting ring. |
|
22299 |
1700 |
|
1,700
gal 304LSS vert jkt agit reactor. 72" dia x 90" str side, weld
dish top and btm. Mfd by Joseph Oat and Son, Spec #SW820M, SN 8046. Int
rated 200 psi @ 250 deg F. CS str jkt. Lightnin agit drive. (2) 4-blade
pitched paddle agitators. Mech seal. Openings: top 1-18", 2-4"
sight glasses, 2-1", 2-5", 1-1 1/2"; btm 1-4". |
|
22300 |
1740 |
304 SS |
1,740
gal (1450 Imperial gal), vert 304SS reactor body w/coils. 6'5" dia x
5'4" str side. Openings: top 1-18", 1-12", 2-6",
10-4"; btm 1-4". No legs. |
|
22301 |
1740 |
304 SS |
1,740
gal (1450 Imperial gal), vert 304SS reactor body w/coils. 6'9" dia x
5'4" str side, weld dish top, bolt cone btm. Test pressure 90 psi. SS
int coils. Openings: top 1-18", 1-12", 2-6", 10-4";
btm 1-4". No mountings. |
|
22302 |
1750 |
304 SS |
****
1,750 gal 304SS clad vert jkt reactor. 6'6" dia x 6'6" str side,
bolt dish top, dish btm. Full CS jacket. Mfd. by Industrial Process Engrs,
National Board #322, SN 1950. Rated 45 psi @ 350 deg F. internal, 45 psi
in jacket. Has top entering 2-speed drive with packing gland on shaft.
Drive has 10/2.5 HP, 3/60/220/440 volt, 1160/570 rpm TEFC motor. 3"
diameter shaft tapers at bottom with 8" diameter 3-blade propellor.
SS thermowell in tank. Openings: top 2-19" manway with covers with
swing bolts, 4-8"; bottom 1-3" center outlet with plug valve. |
|
22303 |
1800 |
304 SS |
****
1,800 gal (7100 litre) 304SS clad reactor. 2.1m dia x 1.12m str side, weld
dish heads. Mfd by Huls (Germany), SN 4325. Jkt rated 6 bar @ 150 deg C,
int rated 15 bar and full vac @ 150 deg C. 3-blade retreat curve agit 1.1m
dia, driven by 17.5 KW, 3/50/380 volt, 1450 rpm vert flanged motor,
connected to Kestermann gear reducer, Grp 320VFS, 12:1 ratio. Mech seal on
shaft. 3-finger upward baffle w/packing gland. Openings: top 500mm
(20") manway w/bolted cover, 4-150mm, 2-100mm; 1-100mm (4")
center btm outlet. Lugs for mounting. |
|
22304 |
1800 |
304 SS |
****
1,800 gal (7100 litre) 304SS clad reactor. 2.1m dia x 1.12m str side, weld
dish heads. Mfd by Huls (Germany), SN 4314. Jkt rated 6 bar @ 150 deg C,
int rated 15 bar and full vac @ 150 deg C. 3-blade retreat curve agit 1.1m
dia, driven by 17.5 KW, 3/50/380 volt, 1450 rpm vert flanged motor,
connected to Kestermann gear reducer, Grp 320VFS, 12:1 ratio. Mech seal on
shaft. 3-finger upward baffle w/packing gland. Openings: top 500mm
(20") manway w/bolted cover, 4-150mm, 2-100mm; 1-100mm (4")
center btm outlet. Lugs for mounting. |
|
22305 |
1800 |
304 SS |
****
1,800 gal (7100 litre) 304SS clad reactor. 2.1m dia x 1.12m str side, weld
dish heads. Mfd by Huls (Germany), SN 4331. Jkt rated 6 bar @ 150 deg C,
int rated 15 bar and full vac @ 150 deg C. 3-blade retreat curve agit 1.1m
dia, driven by 17.5 KW, 3/50/380 volt, 1450 rpm vert flanged motor,
connected to Kestermann gear reducer, Grp 320VFS, 12:1 ratio. Mech seal on
shaft. 3-finger upward baffle w/packing gland. Openings: top 500mm
(20") manway w/bolted cover, 4-150mm, 2-100mm; 1-100mm (4")
center btm outlet. Lugs for mounting. |
|
22306 |
1800 |
304 SS |
****
1,800 gal (7100 litre) 304SS clad reactor. 2.1m dia x 1.12m str side, weld
dish heads. Mfd by Huls (Germany), SN 4319. Jkt rated 6 bar @ 150 deg C,
int rated 15 bar and full vac @ 150 deg C. 3-blade retreat curve agit 1.1m
dia, driven by 17.5 KW, 3/50/380 volt, 1450 rpm vert flanged motor,
connected to Kestermann gear reducer, Grp 320VFS, 12:1 ratio. Mech seal on
shaft. 3-finger upward baffle w/packing gland. Openings: top 500mm
(20") manway w/bolted cover, 4-150mm, 2-100mm; 1-100mm (4")
center btm outlet. Lugs for mounting. |
|
22307 |
1800 |
304 SS |
****
1,800 gal (7100 litre) 304SS clad reactor. 2.1m dia x 1.12m str side, weld
dish heads. Mfd by Huls (Germany), SN 4301. Jkt rated 6 bar @ 150 deg C,
int rated 15 bar and full vac @ 150 deg C. 3-blade retreat curve agit 1.1m
dia, driven by 17.5 KW, 3/50/380 volt, 1450 rpm vert flanged motor,
connected to Kestermann gear reducer, Grp 320VFS, 12:1 ratio. Mech seal on
shaft. 3-finger upward baffle w/packing gland. Openings: top 500mm
(20") manway w/bolted cover. 4-150mm, 2-100mm; 1-100mm (4")
center btm outlet. Lugs for mounting. |
|
22308 |
1800 |
304 SS |
1,800
gal 304SS jkt agit reactor. 6' dia x 8' str side, weld dish top and btm.
Mfd by Pemco. Full CS str jkt. Lightnin Mdl 74C25 agit drive, 11.3:1
ratio, 100 rpm output. Direct coupled to 25 HP, 3/60/550 volt, 1180 rpm
motor. (2) 4-blade pitched paddle agitators, (4) baffles. Mech seal.
Openings: top 1-18" manway w/cover, 2-12", 2-4", 2-2";
btm 1-6", 1-3", 2-1 1/2". |
|
22309 |
1800 |
304 SS |
1,800
gal 304SS vert jkt agit reactor. 6' dia x 8' str side, weld dish top and
btm. Mfd by Pemco, NB #538, SN 1177. Int rated 50 psi @ 250 deg F, jkt
rated 10 psi @ 50 deg F. Str jkt 4' up side. Lightnin Mdl 74C25 agit
drive, 11.3:1 ratio, 100 rpm output. Direct coupled to 25 HP, 3/60/550
volt, 1180 rpm motor, UL label. (2) 4-pitched paddle agitators, (4)
baffles. Mech seal. Openings: 1-20" manway w/cover, 4-2", 1-2
1/2", 1-3", 1-6"; btm 2-4", 5-3". (4) mounting
legs. |
|
22311 |
1800 |
304 SS |
1,800
gal (1500 Imperial gal), vert 304SS jkt agit reactor. 7' ID x 6' str side,
bolt dish top, weld dish btm. Mfd by Towler/Curtis, SN CM530/4473. Int
rated 100 psi, jkt rated 100 psi @ 572 deg F. Str jkt. Curtis agit drive,
variable ratio, variable rpm output, belt driven by 35 HP flameproof
motor. Mech seal. Carter variable speed gearbox. Double spiral agitator.
Openings: top 1-18" manway, 1-6", 3-4", 5-2"; btm
1-10" outlet. (4) brackets. |
|
22310 |
1800 |
SS |
1,800
gal (1500 Imperial gal), vert SS agit reactor body w/coils. 5'8" dia
x 6' str side, weld dish top and btm. Int rated 75 psi @ 302 deg F. SS
coil rated 150 psi @ 302 deg F. No drive. (2) flat turbines. Openings: top
2-1", 4-2", 1-6" sight glass, 1-16" w/cover; side
2-3"; btm 1-2". (4) legs. |
|
22312 |
1870 |
304ELC SS |
****
1870 gal 5000 psi, 304ELC SS clad horiz autoclave/reactor. 46" dia x
19' str side, hemi-heads. 5.182" wall thickness, 1/8" claading.
Mfg by AO Smith Co, SN MV50651-2. Rated 5000 psi @ 300 deg F, 7000 psi
test. Reactor has horiz tube bundle 65.44 sq ft, (10) U-tubes 5/8"
tubes, 3/16" wall thickness, 20' long str side, 8" dia bundle,
Size 6-240, Type CEU. (3) top entering Lightnin mixers, Mdl 2STEDS-20.2,
350 rpm impellor speed. Direct driven by 20 HP, 3/60/220/440 volt mtr w/UL
label. Mech seal on shafts. Each drive has 304SS shaft, 2 1/2" dia
shaft w/2-12" dia 6-blade disk turbines. Openings: top 3-8" for
agit, 3-2", 1-1 1/2"; one head 1-16" manway w/cover,
4-6" tube connections; btm 4-1 1/2". |
|
22313 |
1870 |
304ELC SS |
****
1870 gal 5000 psi, 304ELC SS clad horiz autoclave/reactor. 46" dia x
19' str side, hemi-heads. 5.182" wall thickness, 1/8" cladding.
Mfg by AO Smith Co, SN MV50651-1. Rated 5000 psi @ 300 deg F, 7000 psi
test. Reactor has horiz tube bundle 65.44 sq ft, (10) U-tubes 5/8"
tubes, 3/16" wall thickness, 20' long str side, 8" dia bundle,
Size 6-240, Type CEU. (3) top entering Lightnin mixers, Mdl 2STEDS-20.2,
350 rpm impellor speed. Direct driven by 20 HP, 3/60/220/440 volt mtr w/UL
label. Mech seal on shafts. Each drive has 304SS shaft, 2 1/2" dia
shaft w/2-12" dia 6-blade disk turbines. Openings: top 3-8" for
agit, 3-2", 1-1 1/2"; one head 1-16" manway w/cover,
4-6" tube connections; btm 4-1 1/2". |
|
22314 |
1900 |
304 SS |
1,900
gal 304SS clad reactor/fermentor w/int coils. 72" dia x 9' str side,
weld dish top and btm. Mfd by Rohm and Haas Mfg, PA Std #3. Int rated 75
psi @ 600 deg F. Shell 1/4" thick, heads 1/2" thick. (2) sets
4" dia coils, (7) turns. Has bridge mtd Phila drive, Mdl 3511, w/75
HP drip-proof motor. Packing gland on shaft. Openings: top 1-8" with
cover, 22" x 12" w/cover and 3" sight glass, 3-2",
1-3", 1-1"; side 1-3"; 3" center btm outlet. |
|
22315 |
1900 |
304 SS |
1,900
gal 304SS clad reactor/fermentor w/int coils. 72" dia x 9' str side,
weld dish top and btm. Mfd by Rohm and Haas Mfg, PA Std #4. Int rated 75
psi @ 600 deg F. Shell 1/4" thick, heads 1/2" thick. (2) sets
4" dia coils, (7) turns. Unit has bridge mtd Phila drive, Mdl 3511,
w/50 HP drip-proof motor. Packing gland on shaft. Openings: top 1-8"
w/cover, 2 | | |
