SS Reactors - Over 5,000 Gal. |
  |
|
Item
No: |
Capacity |
Description: |
|
22407 |
5000 |
5,000
gallon 304SS vertical jacketed agitated reactor. 8' diameter x 13'
straight side, welded dished top and bottom. Manufactured by Boiler and
Tank Co, Serial #5592-B, NJ Spec #5096. Internal rated 50 psi @ 300 degree
F, jacket rated 28 psi @ 300 degree F. CS jacket on 1/2 straight side.
Philadelphia Model PTECS drive, rated 5 HP, 66.2:1 ratio, 30 rpm output,
direct coupled to 5 HP, 3/60/220 volt, 1800 rpm motor. Packing gland.
Openings: top 1-24" with bolt cover, 6-3", 1-4"; bottom
1-4". Mounted on 4 lugs. |
|
22408 |
5000 |
5,000
Gal. 316SS vertical jacketed agitated reactor system. 9' dia. x 11'
straight side. Has welded dished top and bottom. MFD by Pfaudler. S#
R367-1572 Drive MFD by: Pfaudler, Model # FMDWV527104B, Serial # 87086493.
32.5 hp, 25 - 1 ratio, 70 rpm output direct coupled to 25 hp/3/60/230/460
volts, 1765 rpm with UL label. Packing gland. Has (2) 6 blade retreat
curve agitators on SS shaft. Has 205 square foot SS condenser (109441),
and approx. 700 square foot condenser (109443). Top openings: 1 - 18"
with hinged cover, 1-1", 1-1 1/2", 4-2", 2 - 3", 2 -
4", 2 -8". Bottom opening: 4". Mounted with 6 legs. |
|
22409 |
5000 |
****
5,000 gal 304SS horiz reactor/digester. 84" dia x 200" str side,
weld dish heads. Mfd by Panhandle Mfg, SN P6763H. Unit designed for 15 psi
@ 150 deg F int, 30 psi in plate coil jkt. Unit has int paddle agit (shaft
is 6" dia x 226" int, 258" overall length), driven by Foote
Jones gear reducer, SN 2X-95087, Mdl L736C-256T, 1800 rpm input, 25 rpm
output, 70.6:1 ratio, setup for direct coupled, driven by 20 HP,
3/60/230/460 volt, 1750 rpm TEFC motor, explosion proof, UL label, Frame
#256T. Packing glands on shaft. Openings: top 2-4", 2-6",
1-24", 1-1 1/2", 1-2", 1-12"; btm 2-3"; (1) head
2-2", 1-1". Mtd on CS saddles. |
|
22410 |
6000 |
****
6,000 gal (22.7 cu meter), 304LSS low pressure vert jkt agit reactor. 3.2m
dia x 2.6m str side, weld dish top, weld dish btm. Mfd by Shin Maiwa, SN
R105H02. Int rated 1 Kg @ -5 deg C, jkt rated 3 Kg @ -10 deg C). Str jkt.
(2) sets of 2100mm 4-blade pitch paddle agitators driven by pedestal mtd
Sumitomo agit drive, Mdl V306-61, SN 7019087, rated 7.5 KW, 48:1 ratio,
belt driven by 7.5 KW, 3/50/380 volt, 970 rpm TEFC motor. Packing gland.
Openings: top 1-24" w/bolt cover, 1-4", 1-2", 1-6",
1-1"; side 1-8"; btm 1-8", 1-6" blank (offset). Shell
.50" (14mm) thick, head .63" (16mm) thick. |
|
22411 |
6600 |
****
6,600 gal (25,000 liter) 304SS agit jkt reactor. 3000mm dia. Mfd by MWB
Buchs/SG, SN 32147. Int rated 2 bar; coil jkt rated 13 bar @ 50/150 deg C.
Equipped w/Ekato Type HWL4300 agit drive. Mech seal on shaft. W/Schorch
5.0 KW, 3/50/380 volt, 1445 rpm ExEG3 motor. Openings: top 1-450mm
w/1-100mm, 1-25mm, 4-100mm, 2-150mm, 1-600mm manway w/cover. Mounting
ring. |
|
22412 |
7000 |
****
7,000 gal (26.5 cu meter), 304LSS vert jkt double ribbon agit design
reactor. 10' (2800mm) dia x 11' (3380mm) str side, bolt dish top, weld
dish |
|
22413 |
7300 |
****
7,300 gal 316LSS clad vert jkt agit reactor. 8'6" dia x 15'3
1/2" str side, weld dish top and btm. Mfd by Brighton, NB stamped.
Int rated 250 psi/full vac @ 300 deg F, jkt rated 36 psi @ 300 deg F. Btm
entering Phila agit drive, driven by 150 HP, 1160 rpm motor. 2-blade
pitched paddle agit. Mech seal. XP starters. |
|
22414 |
7800 |
****
7,800 gal 316SS clad reactor body. 10' dia x 12' str side, weld hemi-top,
48" deep cone btm. Mfd by Creusot Loire, ASME VIII Code constructed,
Fabrication #67/4226-2885. Max working pressure 207 psig @ 176 deg F int,
58 psig @ 194 deg F in jkt. Design pressure full vac and 232 psig @ 176
deg F int, 65 psig @ 194 deg F in jkt. Test pressures 348 psig int, 98
psig in jkt. Full CS jkt. (4) int baffles on side walls. Openings: top
1-48" center, 4-8", 2-10", 2-6"; side 1-6",
1-18" manway w/cover on hinge; btm of cone is inverted w/1-12"
opening in center and 5-6" around the center opening. Unit orig had
btm entering drive. |
|
22415 |
8000 |
****8,000
gal 316SS clad horiz reactor. 7' dia x 23.29' long, (1) weld dish head,
(1) bolt dish head. Mfd by Creusot Loire (France). Shell rated 232 psi @
158 deg F (16 bar @ 70 deg C); jkt rated 58 psi @ 176 deg F (4 bar @ 80
deg C). CS double envelope type jkt. Jkt capacity 494 gals. Double ribbon
style agit w/(25) scrapers. Openings: top 3-12", 1-10",
1-42"; btm 2-4"; head 1-4", 1-10". Driven by 150 HP,
3/60/460 volt, 1190 rpm motor. Mtd on saddles. |
|
22416 |
8000 |
****8,000
gal 316SS clad horiz reactor. 7' dia x 23.29' long, (1) weld dish head,
(1) bolt dish head. Mfd by Creusot Loire (France). Shell rated 232 psi @
158 deg F (16 bar @ 70 deg C); jkt rated 58 psi @ 176 deg F (4 bar @ 80
deg C). CS double envelope type jkt. Jkt capacity 494 gals. Double ribbon
style agit w/(25) scrapers. Openings: top 3-12", 1-10",
1-42"; btm 2-4"; head 1-4", 1-10". Driven by 150 HP,
3/60/460 volt, 1190 rpm motor. Mtd on saddles. |
|
22417 |
8000 |
****8,000
gal 316SS clad horiz reactor. 7' dia x 23.29' long, (1) weld dish head,
(1) bolt dish head. Mfd by Creusot Loire (France). Shell rated 232 psi @
158 deg F (16 bar @ 70 deg C); jkt rated 58 psi @ 176 deg F (4 bar @ 80
deg C). CS double envelope type jkt. Jkt capacity 494 gals. Double ribbon
style agit w/(25) scrapers. Openings: top 3-12", 1-10",
1-42"; btm 2-4"; head 1-4", 1-10". Driven by 150 HP,
3/60/460 volt, 1190 rpm motor. Mtd on saddles. |
|
22418 |
8000 |
****8,000
gal 316SS clad horiz reactor. 7' dia x 23.29' long, (1) weld dish head,
(1) bolt dish head. Mfd by Creusot Loire (France). Shell rated 232 psi @
158 deg F (16 bar @ 70 deg C); jkt rated 58 psi @ 176 deg F (4 bar @ 80
deg C). CS double envelope type jkt. Jkt capacity 494 gals. Double ribbon
style agit w/(25) scrapers. Openings: top 3-12", 1-10",
1-42"; btm 2-4"; head 1-4", 1-10". Driven by 150 HP,
3/60/460 volt, 1190 rpm motor. Mtd on saddles. |
|
22419 |
8000 |
****8,000
gal 316SS clad horiz reactor. 7' dia x 23.29' long, (1) weld dish head,
(1) bolt dish head. Mfd by Creusot Loire (France). Shell rated 232 psi @
158 deg F (16 bar @ 70 deg C); jkt rated 58 psi @ 176 deg F (4 bar @ 80
deg C). CS double envelope type jkt. Jkt capacity 494 gals. Double ribbon
style agit w/(25) scrapers. Openings: top 3-12", 1-10",
1-42"; btm 2-4"; head 1-4", 1-10". Driven by 150 HP,
3/60/460 volt, 1190 rpm motor. Mtd on saddles. |
|
22420 |
8400 |
****
8,400 gal (32,000 liter) 316SS (1.4571) clad agit jkt reactor. 3146mm dia
x 4255mm str side, weld dish heads. Mfd by Rheinstahl, SN 8126. Int rated
10 bar and full vac; jkt rated 6 bar and full vac @ 200 deg C. 1/2 pipe
coil jkt. Equipped w/Ekato Type HWI-5120 agit drive. Mech seal on shaft
w/cooler. W/paddle agit @ 45 deg pitch. (3) baffles. Openings: top 500mm
manway w/cover and davit, 2-250mm, 5-100mm; btm 1-100mm center, 1-150mm.
Designed to German TUV standards. |
|
22421 |
8450 |
****
8,450 gal (32,000 liter) 316SS (1.4571) clad agit jkt reactor. 3146mm dia
x 3755mm str side, weld dish heads. Mfd by Rheinstahl, SN 8125. Int rated
10 bar and full vac; jkt rated 6 bar and full vac @ 200 deg C. Total
volume 36,500 liter. W/(3) sets of 2-paddle agitators @ 45 deg pitch.
Openings: top 500mm manway w/davit, 2-200mm, 4-100mm; btm 1-100mm center,
1-150mm. Designed to German TUV standards. |
|
22422 |
8500 |
****
8,500 gal (32,000 liter) 316SS clad agit jkt reactor. 3000mm dia x 4415mm
str side, weld dish heads. Mfd by Fried Krupp, SN 532-915/2. Rated 10 ATU
and full vac; jkt rated 6 ATU and full vac @ 200 deg C. 1/2 pipe coil jkt.
Openings: top 600mm manway w/cover and davit, 2-100mm, 2-200mm, 2-250mm,
1-400mm; 1-500mm dia center btm outlet reduced to 1-175mm, 1-50mm.
Designed to German TUV standards. Requires gear and motor. Has (4) sets of
turbine agitators, 100mm dia agit. |
|
22423 |
8700 |
****
8,700 gal (33,000 liter) 304SS (1.4301) agit jkt reactor. 3568mm dia x
4560mm from top nozzle to btm discharge. Mfd by Bertram. Int rated 5 bar
and full vac, 13 bar on pipe coil jkt. Equipped w/(2) sets of 900mm dia
blades agit. Shaft 120mm dia. Mech seal on shaft. Driven by off-center
Ekato Type HWL4120 agit driven by 5.5 KW, 3/50/380 volt motor. W/Funda
Type 9.4-24-4.74 foam separator. Openings: top 2-600mm, 1-32mm, 1-40mm,
1-50mm, 1-100mm, 1-150mm, 1-300mm; 1-100mm center btm outlet. Mtd on legs. |
|
22424 |
9600 |
****
9,600 gal (36,500 liters) 316SS clad agit jkt reactor. 2850mm dia x 4370mm
str side, weld dish heads. Mfd by DeDietrich (France), SN 622. Int rated
15 bar @ 100 deg C; jkt rated 7.5 bar @ 95 deg C. Equipped w/(7) sets of
2-blade axial flow @ 45 deg turbine agitators. Mech seal on shaft. With
lubricator powerpak. W/Elli gear reducer, 1:16, driven by 110 KW, 3/50/380
volt, 1480 rpm main motor; 22 KW, 3/50/380 volt, 725 rpm secondary motor.
W/(3) baffles. Openings: top 1-20" manway w/cover, 1-6",
2-4", 2-2", 1-1 1/2", 1-3/4"; btm 1-3" center,
1-6", 1-4". Lifting eyes. Designed to ASME Section VIII, Div 1
standards and French code standards. |
|
22425 |
9600 |
****9,600
gal (36,500 liters) 316SS clad agit jkt reactor. 2850mm dia x 4370mm str
side, weld dish heads. Mfd by DeDietrich (France), SN 623. Int rated 15
bar @ 100 deg C; jkt rated 7.5 bar @ 95 deg C. Equipped w/(7) sets of
2-blade axial flow 45 deg turbine agitators. Mech seal on shafat. With
lubricator powerpak. W/Elli reducer, 1:16, driven by 110 KW, 3/50/380
volt, 1480 rpm main motor; 22 KW, 3/50/380 volt, 725 rpm auxilliary motor.
(3) baffles. Openings: top 1-20" manway w/cover, 1-6",
2-4", 2-2", 1-1 1/2", 1-3/4"; btm 1-3" center,
1-6", 1-4". Lifting eyes. Designed to French code and ASME
Section VIII, Div 1 standards. |
|
22426 |
10500 |
****
10,500 gal (8800 Imperial gals, 40000 liters), 316SS vert jkt agit
reactor/autoclave. 8'6" dia x 21'9" str side, weld dish top and
btm. Mfd by Robert Jenkins. Int rated 330 psi/vac @ 85 deg C; jkt rated 60
psi. CS limpet coil jkt, (42) turns on str side. Lightnin mixer, 14:1
ratio, direct coupled to 200 KW, 3/50/415 volt, 991 rpm non-flameproof
motor. Mech seal. Btm entering agit. Unit has 4-blade SS impellor.
Openings: top 1-22" hydraulic closed manway, 2-10", 1-9",
3-4", 1-3"; side 14-6"; btm 1-10", 1-6",
1-2". (4) CS legs. |
|
22427 |
10500 |
****
10,500 gal (8800 Imperial gals, 40000 liters), 316SS vert jkt agit
reactor/autoclave. 8'6" dia x 21'9" str side, weld dish top and
btm. Mfd by Robert Jenkins. Int rated 330 psi/vac @ 85 deg C; jkt rated 60
psi. CS limpet coil jkt, (42) turns on str side. Lightnin mixer, 14:1
ratio, direct coupled to 200 KW, 3/50/415 volt, 991 rpm non-flameproof
motor. Mech seal. Btm entering agit. Unit has 4-blade SS impellor.
Openings: top 1-22" hydraulic closed manway, 2-10", 1-9",
3-4", 1-3"; side 14-6"; btm 1-10", 1-6",
1-2". (4) CS legs. |
|
22428 |
10500 |
****
10,500 gal (8800 Imperial gals, 40000 liters), 316SS vert jkt agit
reactor/autoclave. 8'6" dia x 21'9" str side, weld dish top and
btm. Mfd by Robert Jenkins. Int rated 330 psi/vac @ 85 deg C; jkt rated 60
psi. CS limpet coil jkt, (42) turns on str side. Lightnin mixer, 14:1
ratio, direct coupled to 200 KW, 3/50/415 volt, 991 rpm non-flameproof
motor. Mech seal. Btm entering drive. Unit has 4-blade SS impellor.
Openings: top 1-22" hydraulic closed manway, 2-10", 1-9",
3-4", 1-3"; side 14-6"; btm 1-10", 1-6",
1-2". (4) CS legs. |
|
22429 |
10500 |
****
10,500 gal (8800 Imperial gals, 40000 liters), 316SS vert jkt agit
reactor/autoclave. 8'6" dia x 21'9" str side, weld dish top and
btm. Mfd by Robert Jenkins. Int rated 330 psi/vac @ 85 deg C; jkt rated 60
psi. CS limpet coil jkt, (42) turns on str side. Lightnin mixer, 14:1
ratio, direct coupled to 200 KW, 3/50/415 volt, 991 rpm non-flameproof
motor. Mech seal. Btm entering agit. Unit has 4-blade SS impellor.
Openings: top 1-22" hydraulic closed manway, 2-10", 1-9",
3-4", 1-3"; side 14-6"; btm 1-10", 1-6",
1-2". (4) CS legs. |
|
22430 |
10500 |
****
10,500 gal (8800 Imperial gals, 40000 liters), 316SS vert jkt agit
reactor/autoclave. 8'6" dia x 21'9" str side, weld dish top and
btm. Mfd by Robert Jenkins. Int rated 330 psi/vac @ 85 deg C; jkt rated 60
psi. CS limpet coil jkt, (42) turns on str side. Lightnin mixer, 14:1
ratio, direct coupled to 200 KW, 3/50/415 volt, 991 rpm non-flameproof
motor. Mech seal. Btm entering agit. Unit has 4-blade SS impellor.
Openings: top 1-22" hydraulic closed manway, 2-10", 1-9",
3-4", 1-3"; side 14-6"; btm 1-10", 1-6",
1-2". (4) CS legs. |
|
22431 |
10500 |
****
10,500 gal (8800 Imperial gals, 40000 liters), 316SS vert jkt agit
reactor/autoclave. 8'6" dia x 21'9" str side, weld dish top and
btm. Mfd by Robert Jenkins. Int rated 330 psi/vac @ 85 deg C; jkt rated 60
psi. CS limpet coil jkt, (42) turns on str side. Lightnin mixer, 14:1
ratio, direct coupled to 200 KW, 3/50/415 volt, 991 rpm non-flameproof
motor. Mech seal. Btm entering agit. Unit has 4-blade SS impellor.
Openings: top 1-22" hydraulic closed manway, 2-10", 1-9",
3-4", 1-3"; side 14-6"; btm 1-10", 1-6",
1-2". (4) CS legs. |
|
22432 |
18000 |
****
18,000 gal vert 304SS clad reactor. 12' dia x 20' str side, weld dish
heads. Mfd by National. Design for 30 psi/full vac int, 30 psi jkt.
4" dia internal pipe coil approx 10' high. 75 HP bridge mtd agit
w/Falk gear reducer for approx 55 rpm output speed. SS triple turbine agit.
Shell 5/8" (.625") thick; head 1/2" (.5") thick; jkt
5/16" (.312) thick. |
|
22433 |
20000 |
****
20,000 gal 304SS clad vert agit reactor w/coils. 12' OD x 22'7" str
side. Int rated 40 psi. (3) coil banks: (10) turns each of 3" OD x 14
gauge 304 SS tubing, 9'8" dia center to center. (4) int baffles,
10" wide. (3) sets, split disc, (6) flat blade agitator, 42"
overall dia, 4" shaft. 6" dia sparger coil. Openings: top 1-20
manway hinged w/counterweights, 1-8" w/separate stuffing box; btm
1-6" nozzle; side 1-6", 6-3". Mixer unit support welded to
top. Mixco gear reducer, 112 rpm output. Allis Chalmers 125 HP, 3/60/440
volts, 1750 rpm, 505-S frame, splash proof motor. Mixco SN:-1,none;
-2,917TES12529; -3,917TFS1212; -4, 917TES12529; -5,917TFS12529;
-6,917TES12529. -4 unit has 150 HP motor w/1770 rpm. W/heat exchanger,
motor and pump for lube oil and gear reducer. |
|
22434 |
27000 |
****
27,000 gal total capacity 304LSS clad vert reactor. 172" dia x
17'7" str side, weld elliptical 2:1 dish top and btm. Mfd by
Brighton, NB #3350. Jkt rated 50 psi @ 140 deg F, int rated 175 psi/full
vac @ 180 deg F. 3/4 CS jkt. Top entering Lightnin agit drive, 21.2:1
ratio, 84 rpm output, direct driven by 150 HP, 3/60/460 volt, 1175 rpm.
Mech seal on shaft rated 175 psig @ 180 deg F. Shaft is 21'11"
overall length, w/(3) 304SS impellors. Top impellor is 4-blade 44"
dia, btm (2) impellors are 4-blade 66 3/4" dia. Openings: 1-3",
1-4", 1-5", 1-6", 1-24", 2-20" manways. |
|
22435 |
|
Baker
Perkins continuous flowmaster reactor. SN 49835, Order #9397. Fabricated
of type 304SS. Plate dia 11". Has (10) plates complete w/15 HP,
3/60/220/440 volts explosion proof motor and V-belt drive. Capacity 200
gal per hr. Reactor consists of series of fixed heat transfer plates.
Spaced between each heat transfer plate are beaters mtd on common shaft.
These beaters intensively mix, in relatively small volume, the material
flowing through channels of each heat transfer plate. The great degree of
turbulance creates a thin film giving high heat transfer coefficients than
obtainable on conventional equipment. |
|
|
