| Item ID |
Capacity |
Material |
Description |
| 24276 |
10000 |
SS |
USED APPROXIMATELY 10,000
GALLON STAINLESS STEEL MIX TANK. 12' DIAMETER X 12' STRAIGHT SIDE. CONE
TOP, FLAT BOTTOM. WITH (7) ROWS 2" INTERNAL COILS. |
| 24275 |
10000 |
316L SS |
USED APPROXIMATELY 10,000
GALLON VERTICAL 316L STAINLESS STEEL MIXING TANK, 9' I.D. X 22' HIGH ON
STRAIGHT SIDE, BUILT 1997, M & M WELDING, WITH DUAL 50" IMPELLER
AGITATOR WITH 5 HP MOTOR AND REDUCER. S/N 97-024B. ON 8-LEGS. 20"
SIDE BOTTOM MANWAY. 4" CENTER BOTTOM OUTLET. 20" TOP MANWAY, (3)
2",(2) 3", (3) 4", (1) 6". PROQUIP 40:1 29RPM,
4-BAFFLES. |
| 24274 |
10000 |
316L SS |
USED APPROXIMATELY 10,000
GALLON VERTICAL 316L STAINLESS STEEL MIXING TANK, 9' I.D. X 22' HIGH ON
STRAIGHT SIDE, BUILT 1997, M & M WELDING, WITH DUAL 50" IMPELLER
AGITATOR WITH 5 HP MOTOR AND REDUCER. S/N 97-024B. ON 8-LEGS. 20"
SIDE BOTTOM MANWAY. 4" CENTER BOTTOM OUTLET. 20" TOP MANWAY, (3)
2",(2) 3", (3) 4", (1) 6". PROQUIP 40:1 29RPM,
4-BAFFLES. |
| 24273 |
10000 |
316L SS |
USED APPROXIMATELY 10,000
GALLON VERTICAL 316L STAINLESS STEEL MIXING TANK, 9' I.D. X 22' HIGH ON
STRAIGHT SIDE, BUILT 1997, M & M WELDING, WITH DUAL 50" IMPELLER
AGITATOR WITH 5 HP MOTOR AND REDUCER. S/N 97-024B. ON 8-LEGS. 20"
SIDE BOTTOM MANWAY. 4" CENTER BOTTOM OUTLET. 20" TOP MANWAY, (3)
2",(2) 3", (3) 4", (1) 6". PROQUIP 40:1 29RPM,
4-BAFFLES. |
| 24272 |
10000 |
SS |
USED APPROXIMATELY 10000
GALLON STAINLESS STEEL VERTICAL TANK. APPROXIMATELY 12' DIAMETER X
12'6" HIGH. OPEN TOP, DISHED BOTTOM. 3" CENTER BOTTOM OUTLET
WITH MANUAL SLIDE VALVE. ON 4 LEGS FOR APPROXIMATELY 30" CLEARANCE.
(4) BAFFLES. (1) 4" SIDE BOTTOM OPENING. |
| 24271 |
10000 |
SS |
USED APPROXIMATELY 10000
GALLON STAINLESS STEEL CRYSTALLIZER TANK, SLIGHT INCLINED BOTTOM SECTION
WITH DISHED BOTTOM.NOW MOUNTED ON STRUCTURAL STAND. |
| 23475 |
10000 |
SS |
Used 10000 gallon vertical
stainless steel tank. Vessel 5H20 @ 212 degrees F. Built by
Roben. Flat bottom. Dished top. Built 1999. |
| 23473 |
10000 |
SS |
Used DCI 10,000 stainless
steel vertical silo tanks. 96" ID X approximately 27' inside
straight side. Dish top, sloping bottom. Insulated 102" OD onside,
bottom and top.
Inswing manway side, near bottom. |
| 23404 |
10000 |
316L SS |
Used approximately 10000
gallon T316L stainless steel vertical tank. 2B finish. 13' diameter X 10'
straight side. Sloping flat bottom. Conical top. Built 1990. Built by Whiting. |
| 23254 |
10000 |
316L |
9'-0" ID x 22' S/S,
316LSS, SOLVENT
NEUTRALIZATION TANK, 10,000 GAL. |
| 23253 |
10000 |
316L |
9'-0" ID x 22' S/S,
316LSS, 10,000 GAL., LOW
SOLVENT WATER NEUTRALIZATION TANK |
| 20971 |
10000 |
SS |
One approx.10000 Gal.
Vertical 304SS tank. Flat top and bottom. 12' x 12'.
Wall Thickness 3/16". |
| 20970 |
10000 |
SS |
One approx. 10000 gal.
Vertical 304SS tank. Flat
top and bottom. Has (1) 3" bottom side outlet. Top manway. Wall
thickness 3/16" |
| 20791 |
10000 |
SS |
10,000
gal 316SS vert agit tank w/coil. 12' (3.7m) dia x 11' (3.35m) str side,
flat top and btm. (1) bank of (5) rows of 1 1/2" pipe coil. Bridge
mtd APV/Osborne Craig agit drive, Mdl PTER012, SN 400102, 30 rpm output.
No gland or seal. Driven by 15 HP (22 KW), 3/50/380 volt motor. 3-tier,
(2) flat multi-blade turbines, (1) 2-blade impellor. (6) fixed baffles.
Openings: top 1-4", 1-10", 1-8"; side 1-6", 1-1";
btm 1-4" offset. Lugs. |
| 20790 |
10000 |
SS |
10,000
gal 316SS vert agit tank w/coil. 12' (3.7m) dia x 11' (3.35m) str side,
flat top and btm. (1) bank of (5) rows of 1 1/2" pipe coil. Bridge
mtd APV/Osborne Craig agit drive, Mdl PTER012, SN 400101, 30 rpm output.
No gland or seal. Driven by 15 HP (22 KW), 3/50/380 volt motor. Flat
multi-blade turbine, (6) fixed baffles. Openings: top 1-4",
1-10", 1-8"; side 1-6", 1-1"; btm 1-4" offset.
Lugs. |
| 20703 |
10000 |
SS |
Used approximately 10,000
gallon vertical stainless steel tank, built by Cherry Burrell.
Refrigerated silo milk tank. 100 square foot cold wall - sweetwater.
120" diameter X 243" overall height. Alcove 60" X 54".
Agitator, 2 speed, 1-1/2hp & 3 hp, 48 or 97 rpm agitator speed.
3" Tri-clover outlet, 2-1/2" Tri-clover inlet. |
| 20702 |
10000 |
SS |
Used approximately 10,000
gallon vertical stainless steel tank, built by Cherry Burrell.
Refrigerated silo milk tank. 100 square foot cold wall - sweetwater.
120" diameter X 243" overall height. Alcove 60" X 54".
Agitator, 2 speed, 1-1/2hp & 3 hp, 48 or 97 rpm agitator speed.
3" Tri-clover outlet, 2-1/2" Tri-clover inlet. |
| 20701 |
10000 |
SS |
Used approximately 10000
gallon stainless steel tank. 11' diameter X 14' straight side. Flat top
and dished bottom. 4" center bottom outlet. Provision for top
entering agitator. On legs. |
| 20700 |
10000 |
SS |
Used approximately 10,000
gallon vertical stainless steel tank, built by Cherry Burrell.
Refrigerated silo milk tank. 100 square foot cold wall - sweetwater.
120" diameter X 243" overall height. Alcove 60" X 54".
Agitator, 2 speed, 1-1/2hp & 3 hp, 48 or 97 rpm agitator speed.
3" Tri-clover outlet, 2-1/2" Tri-clover inlet. |
| 20699 |
10000 |
SS |
Unused Approx. 10000 gallon
vertical stainless steel jacketed tanks. Approx. 10' diameter X 15'
straight side. Dished top and bottom heads. Skirt mounted. Atmospheric
internal. 15 psi half pipe coil jacket. Tophead (1) 18" manway (2)
3" (1) 1" (1) 1.5" and 1" threaded. Center bottom
outlet 3". Built 2000. UNUSED. 2 available |
| 20698 |
10000 |
SS |
Used approximately 10000
gallon vertical stainless steel tank. Approximately 10' diameter X 17'
straight side. Flat bottom. Slightly conical top. bottom side outlet. |
| 20697 |
10000 |
SS |
Used approx. 10000 gallon
horizontal type 304 stainless steel tank. Flat heads. 9' diameter X 21'
long. 2" bottom outlet. 24" top manway. Shell and heads are
1/4" thick. On steel saddles. Built by Brown & Minneapolis.
Serial # 117505. Tank # T450. |
| 24278 |
10400 |
304 SS |
USED APPROXIMATELY 10,400
GALLON T304 STAINLESS STEEL TANK. 10'10" DIAMETER X 16' STRAIGHT SIDE
WITH 19" DEEP DISHED BOTTOM. MANUFACTURED BY LEDCO INC. 12"
BOTTOM SIDE ENTERING AGITATOR. 3" CENTER BOTTOM OUTLET, 3"
NOZZLE ON SIDE NEAR BOTTOM, 6", 3" NOZZLE ON TOP, (2) 3"
NOZZLES ON TOP WITH DIP PIPES, 18" MANWAY ON TOP, (1) PIPE LEGS. |
| 24277 |
10400 |
304 SS |
USED APPROXIMATELY 10,400
GALLON T304 STAINLESS STEEL TANK. 10'10" DIAMETER X 16' STRAIGHT SIDE
WITH 19" DEEP DISHED BOTTOM. MANUFACTURED BY LEDCO INC. 12"
BOTTOM SIDE ENTERING AGITATOR. 3" CENTER BOTTOM OUTLET, 3"
NOZZLE ON SIDE NEAR BOTTOM, 6", 3" NOZZLE ON TOP, (2) 3"
NOZZLES ON TOP WITH DIP PIPES, 18" MANWAY ON TOP, (1) PIPE LEGS. |
| 24279 |
10500 |
304 SS |
USED APPROXIMATELY 10,500
GALLON TYPE 304 STAINLESS STEEL HORIZONTAL TANK. APPROXIMATELY 108"
DIAMETER X 22' STRAIGHT SIDE. DISHED HEADS. SHELL HAS (3) 24" OPENING
ON TOP, AND (1) ON BOTTOM BLANKED OFF, 8' FROM HEAD. |
| 23406 |
11500 |
304 SS |
Used approximately 11500
gallon vertical type 304 stainless steel tank. Approximately 9' 6"
diameter X 22' high. Flat top. Flat sloping bottom.Built by Brown
Minneapolis. 1979. |
| 23405 |
11500 |
304 SS |
Used approximately 11500
gallon vertical type 304 stainless steel tank. Approximately 9' 6"
diameter X 22' high. Flat top. Flat sloping bottom. Bridge mounted
Chemineer drive model 3HTDB-3, 3/.75 hp motor 3 phase 60 cycle 460 volt
motor 1145 rpm with bottom sweep agitator 25/12.5 agitator rpm. Built by
Brown Minneapolis. 1979. |
| 20704 |
11500 |
SS |
Used approximately 11500
gallon vertical type 304 stainless steel tank. Approximately 9' 6"
diameter X 22' high. Flat top. Flat sloping bottom. Bridge mounted
Chemineer drive model 3HTDB-3, 3/.75 hp motor 3 phase 60 cycle 460 volt
motor 1145 rpm with bottom sweep agitator 25/12.5 agitator rpm. Built by
Brown Minneapolis. 7 available |
| 20794 |
11800 |
SS |
****11,800
nickel clad horiz jkt tank. 8' dia x 30' str side, weld dish heads. Mfd by
Leader Iron Works. 3-zone CS jkt on btm of tank only. Openings: top
1-18" w/cover, 4-4", 1-5"; btm 1-3". (4) saddles. |
| 20793 |
11800 |
SS |
****
11,800 nickel clad horiz jkt tank. 8' dia x 30' str side, weld dish heads.
Mfd by Leader Iron Works. 3-zone CS jkt on btm of tank only. Openings: top
1-18" w/cover, 4-4", 1-5"; btm 1-3". (4) saddles. |
| 20792 |
11800 |
SS |
****
11,800 nickel clad horiz jkt tank. 8' dia x 30' str side, weld dish heads.
Mfd by Leader Iron Works. 3-zone CS jkt on btm of tank only. Openings: top
1-18" w/cover, 4-4", 1-5"; btm 1-3". (4) saddles. |
| 23485 |
12000 |
304SS |
Used approximately 12000
gallon vertical type 304 stainless steel tank. Flat hinged top. Dished
bottom. Skirt bottom. 11' 6" diameter X 15' 3" straight side.
3" center bottom outlet. Built by Perry Products. Model VF. Serial
Number A4083. AOH 19' 7 3/4". |
| 20795 |
12000 |
SS |
12,000
gal monel vert tank. 12' dia. Flat heads. Manway. |
| 20712 |
12000 |
SS |
Used approximately 12200
gallon vertical stainless steel dairy tank. Approximately 10' 4"
diameter with flat bottom and dome top. Jacket rated 150 psi at 100
degrees F. Built by Mueller. |
| 20711 |
12000 |
SS |
Used 12000 gallon vertical
type 304 stainless steel mix tank. Flat hinged top. Dished bottom. Skirt
bottom. 12' diameter X 14' straight side. Bridge mounted Philly Gear drive
50 hp. Twin tier 6 blade curved impellor agitator. 4" center bottom
outlet. |
| 20710 |
12000 |
SS |
Used 12000 gallon vertical
type 304 stainless steel mix tank. Flat hinged top. Dished bottom. Skirt
bottom. 12' diameter X 14' straight side. Bridge mounted Philly Gear drive
50 hp. Twin tier 6 blade curved impellor agitator. 4" center bottom
outlet. |
| 20709 |
12000 |
SS |
Used 12000 gallon vertical
type 304 stainless steel mix tank. Flat hinged top. Dished bottom. Skirt
bottom. 12' diameter X 14' straight side. Bridge mounted Philly Gear drive
50 hp. Twin tier 6 blade curved impellor agitator. 4" center bottom
outlet. |
| 20708 |
12000 |
SS |
Used approximately 12000
gallon vertical type 304 stainless steel tank. Flat hinged top. Dished
bottom. Skirt bottom. 11' 6" diameter X 15' 3" straight side.
3" center bottom outlet. Built by Perry Products. Model VF. Serial
Number A4083. AOH 19' 7 3/4". |
| 20707 |
12000 |
SS |
Used 12000 gallon vertical
type 304 stainless steel tank. 12' diameter X 15' straight side and 14' 8
3/16" straight side on the discharge side. Shell is 3/16" thick.
Flat top. Sloped flat bottom with 3" bottom outlet. Tank # T432. |
| 20706 |
12000 |
SS |
Used 12000 gallon vertical
type 304 stainless steel tank. 12' diameter X 15' straight side and 14' 8
3/16" straight side on the discharge side. Shell is 3/16" thick.
Flat top. Sloped flat bottom with 3" bottom outlet. Bottom sweep
agitator with bridge mounted Chemineer drive. Tank # T431. |
| 20705 |
12000 |
SS |
Used 12000 gallon vertical
type 304 stainless steel tank. 12' diameter X 15' straight side and 14' 8
3/16" straight side on the discharge side. Shell is 3/16" thick.
Flat top. Sloped flat bottom with 3" bottom outlet. Tank # T430. |
| 24281 |
12300 |
316 SS |
USED APPROXIMATELY 12,300
GALLON VERTICAL T316 STAINLESS STEEL TANK. APPROXIMATELY 10' DIAMETER X
21' HIGH. FLAT BOTTOM, DISHED TOP. WITH APPROXIMATELY 30 HP LIGHTNING
DRIVE. |
| 24280 |
12300 |
316 SS |
USED APPROXIMATELY 12,300
GALLON VERTICAL T316 STAINLESS STEEL TANK. APPROXIMATELY 10' DIAMETER X
21' HIGH. FLAT BOTTOM, DISHED TOP. WITH APPROXIMATELY 30 HP LIGHTNING
DRIVE. |
| 20797 |
12500 |
SS |
****
12,500 gal (50000 liter) 316SS vert jkt agit tank. 3.35m dia x 4.6m str
side, elliptical top and btm. Mfd by Shinko-Pfaudler, SN 2M60-026-2. Int
rated atmospheric, jkt rated 3 bar. CS jkt. Belt driven Shinko-Pfaudler
Mdl LH456 agit drive, SN 100-0, 4:1 ratio. Packing gland. Driven by 22 KW,
3/50/380 volt, 970 rpm TEFC motor. (4) flat turbine agitators, (2) 3-blade
retreat curve agit. (2) fixed baffles and (2) 3-finger up SS baffles.
Openings: top 1-20" w/swing bolt cover, 2-8", 1-10"; btm
1-12"; side 2-20" on btm head; side 2-20" on jkt w/bolt
cover. (6) legs. |
| 20796 |
12500 |
SS |
****
12,500 gal (50000 liter) 316SS vert jkt agit tank. 3.35m dia x 4.6m str
side, elliptical top and btm. Mfd by Shinko-Pfaudler, SN 2M60-026-1. Int
rated atmospheric, jkt rated 3 bar. CS jkt. Belt driven Shinko-Pfaudler
Mdl LH456 agit drive, SN 100-1, 4:1 ratio. Packing gland. Driven by 15 HP
(22 KW), 3/50/380 volt, 970 rpm TEFC motor. (4) flat turbine agitators,
(2) SS 3-balde retreat curve agit. (2) fixed baffles and (2) SS 3-finger
up baffles. Openings: top 1-20" w/swing bolt cover, 2-8",
1-10"; btm 1-12", 2-20" on btm head; 2-20" w/bolt
cover on jkt. (6) legs. |
| 24282 |
13000 |
SS |
USED APPROXIMATELY 13000
GALLON STAINLESS STEEL TANK. 12' WIDE X 16' HIGH. FLAT TOP, FLAT BOTTOM.
WITH AN APPROXIMATELY 20 HP SIDE-ENTERING AGITATOR. |
| 20600 |
13000 |
SS |
VESSEL, SS, 13000 GAL,
DESIGN: 20 LB @ 225 F, VERT. |
| 20974 |
13235 |
304 SS |
One 13,235 Gal. 304SS
vertical Tank. Flat top and
bottom. Agitated by Philadelphia Gear model= PTEC-16, RPM out = 28. 31.9
to 1 ratio. Has ~ 11 turns of 2" dia coils. 14' 6" L x 12'
6" Dia. |
| 20973 |
13235 |
304 SS |
One 13235 Gal. 304 SS
vertical tank. Flat top and bottom. Has ~40 turns of 4" dia coils.
Has agitator (T-2). 15 HP, 1160 RPM, 550 V. 14' 6" L x 12' 6"
Dia. |
| 20972 |
13235 |
304 SS |
One 13,235 gal. 304 SS
vertical tank. 2" internal coils are 304 SS rated for 50 PSI @ 290
deg. Equipped with 2 speed agitation. HP= 15/7.5, RPM = 1750/875, Volts=
550, gear ratio= 62.5:1. Flat
top and bottom. 14' 6" L x 12' 6" Dia. |
| 23408 |
13300 |
316L SS |
Used approximately 13300
gallon T316L stainless steel vertical tank. 12' 6" diameter x 15'
straight side. Conical top. Sloped flat bottom. Bottom manway 20".
Top manway 20". Bottom
outlets (3) 2", 3". Top nozzles. 8", 3", (2) 2",
(2) 1". Built by Davy McKee. Rated Atmospheric at 140 F. Shell T316L
stainless steel with 2B finish. |
| 23407 |
13300 |
316L SS |
Used approximately 13300
gallon T316L stainless steel vertical tank. 13' diameter X 14' high.
Sloping Flat Bottom, Conical top. Built by Whiting. S/N F4753. Rated
-2/8WC at 140 degrees F. Flat panel coil internal bottom. 1988. |
| 24284 |
13500 |
SS |
USED APPROXIMATELY 13,500
GALLON STAINLESS STEEL TANK. 12' X 15' STRAIGHT SIDE. FLAT BOTTOM, SLIGHT
CONE TOP. |
| 24283 |
13500 |
SS |
USED APPROXIMATELY 13,500
GALLON STAINLESS STEEL TANK. 12' X 15' STRAIGHT SIDE. FLAT BOTTOM, SLIGHT
CONE TOP. |
| 20975 |
13500 |
SS |
One
13,500 gal. SS horizontal tank. Cone top flat bottom. Horizontal. Mounted
on I-beam skid on five saddles. Thickness is approximatley 7/16" |
| 20713 |
13500 |
SS |
Used approximately 13500
gallon vertical stainless steel tank. Approximately 12' diameter X 16'
high. Flat bottom. Slightly conical top. |
| 24286 |
13700 |
SS |
USED APPROXIMATELY 13700
GALLON STAINLESS STEEL VERTICAL TANK. 12'6" WIDE X 15'6" HIGH.
OPEN TOP. SLIGHT CONE BOTTOM. 14" OUTLET. 7.5 HP SIDE ENTERING
AGITATOR. |
| 24285 |
13700 |
SS |
USED APPROXIMATELY 13700
GALLON STAINLESS STEEL VERTICAL TANK. 12'6" WIDE X 15'6" HIGH.
OPEN TOP. SLIGHT CONE BOTTOM. 14" OUTLET. 7.5 HP SIDE ENTERING
AGITATOR. |
| 24288 |
14000 |
304L SS |
USED APPROXIMATELY 14000
GALLON VERTICAL T-304L STAINLESS STEEL STORAGE TANK. 12'3" DIAMETER X
14'6" STRAIGHT SIDE. FLAT TOP AND BOTTOM HEADS. TOP 6" X
12" OVERFLOW BOX. 24" SIDE BOTTOM MANWAY. 10" SIDE BOTTOM
DRAIN. REINFORCED BOTTOM HEAD. |
| 24287 |
14000 |
304L SS |
USED APPROXIMATELY 14000
GALLON VERTICAL T-304L STAINLESS STEEL STORAGE TANK. 12'3" DIAMETER X
14'6" STRAIGHT SIDE. FLAT TOP AND BOTTOM HEADS. TOP 6" X
12" OVERFLOW BOX. 24" SIDE BOTTOM MANWAY. 10" SIDE BOTTOM
DRAIN. REINFORCED BOTTOM HEAD. |
| 23411 |
14000 |
304 SS |
Used vertical 14,000 gallon
T304 stainless steel compartmented tank 12' diameter X 18' high. Upper
tank 7,000 gallon with cone top with manway and inlets. Lower 7,000 gallon
flat bottom with manway near top end of shell. |
| 23410 |
14000 |
304 SS |
Used vertical 14,000 gallon
T304 stainless steel 2 comparmented tank 12' diameter X 18' high. Upper
tank 7,000 gallon with cone top with manway and inlets. Lower 7,000 gallon
flat bottom with manway near top end of shell. |
| 23409 |
14000 |
304 SS |
Used vertical 14,000 gallon
T304 stainless steel 2 compartmented tank 12' diameter X 18' high. Upper
tank 7,000 gallon and cone top with manyway and inlets. Lower 7,000 gallon
flat bottom with manway near top end of shell. |
| 20716 |
14000 |
304 SS |
Used vertical 14,000 gallon
T304 stainless steel compartmented tank 12' diameter X 18' high. Upper
tank 7,000 gallon with dish bottom flat top with m/w and inlets. Lower
7,000 gallon flat bottom with m/w near top end of shell. |
| 20715 |
14000 |
304 SS |
Used vertical 14,000 gallon
T304 stainless steel comparmented tank 12' diameter X 18' high. Upper tank
7,000 gallon with dish bottom, flat top w/ m/w and inlets. Lower 7,000
gallon flat bottom with m/w near top end of shell. |
| 20976 |
14250 |
304 SS |
One 14,250 Gal. 304SS
vertical tank. Cone top, flat bottom. Has coil rated for 150 PSI @ 400
deg. |
| 20798 |
14500 |
SS |
14,500
gal (54.3 cu meter) 304LSS vert tank. 3.1m dia x 7.26m str side, weld dish
top and btm. Int rated full vac @ 175 deg F (full vac @ 80 deg C).
Openings: top 1-36"; side 1-20" w/bolt cover, 1-12",
1-3". |
| 24291 |
15000 |
SS |
USED APPROXIMATELY 15,000
GALLON TOLAN STAINLESS STEEL HORIZONTAL TANK. APPROXIMATELY 10' DIAMETER X
25' LONG. DISHED ENDS. RATED 100 PSI INTERNAL @ 100°F. PARTIAL JACKET
RATED 150 PSI @ 100°F. (1) 3" BOTTOM END NOZZLE, (1) 2" BOTTOM
NOZZLE, (1) 3" TOP NOZZLE, (2) 18" OPENINGS ON TOP. |
| 24290 |
15000 |
304L SS |
USED APPROXIMATELY 15000
GALLON VERTICAL T-304L STAINLESS STEEL STORAGE TANK. 13'6" DIAMETER X
14'6" HIGH STRAIGHT SIDE. FLAT TOP AND BOTTOM HEADS. EQUIPPED WITH
18" X 24" SIDE BOTTOM MANWAY. 8" TOP SIDE INLET. 12"
SIDE BOTTOM DRAIN. BUILT 1994. |
| 24289 |
15000 |
304L SS |
USED APPROXIMATELY 15000
GALLON VERTICAL T-304L STAINLESS STEEL STORAGE TANK. 13'6" DIAMETER X
14'6" HIGH STRAIGHT SIDE. FLAT TOP AND BOTTOM HEADS. EQUIPPED WITH
18" X 24" SIDE BOTTOM MANWAY. 8" TOP SIDE INLET. 12"
SIDE BOTTOM DRAIN. BUILT 1994. |
| 23483 |
15000 |
316SS |
Used approximately 15000
gallon T316L Stainless steel horizontal tank. 12' diameter X 16' 4"
straight side horizontal tank. 12' diameter X 16' 4" straight side.
Dished heads. 1991. Built by McKim and Creed. |
| 23478 |
15000 |
|
Two (2) used 15000 gallon
vertical t-316L stainless steel tanks manufactured by Whiting Metals. 12'
diameter x 18' 6" high straight side, Cone top, flat bottom. Top: (1)
24" manway, (1) 6" (1) 4" and (2) 8" vents. Side
bottom 24" manway and (1) 8" side bottom drain with valve.
External ladder and top safety railing. Built 1991. Internal rated 10 psi
@ 300 F. Tanks are insulated and covered with aluminum sheathing.
Excellent condition, |
| 23412 |
15000 |
304 SS |
Used vertical 15,000 gallon
T304 stainless steel tank 12' diameter X 18' high, cone top and flat
bottom. Has manhole top, inlets and side bottom outlet. |
| 23178 |
15000 |
316 |
15,000 GALLON, 2.0
PSIG/-0.5 PSIG @ 250F, 316 SS, API 520 |
| 23177 |
15000 |
316 |
15,000 GALLON, 2.0
PSIG/-0.5 PSIG @ 250F, 316 SS, API 520 |
| 20799 |
15000 |
SS |
15,000
gal 347SS horiz storage tank. 10' dia x 24'6" str side, weld dish
heads. Mfd by Allied Steel Prod, SN E15387. Int rated 15 psi @ 150 deg F.
Openings: 5-4", 1-6", 1-16" manway w/cover; 6" end btm
outlet. |
| 20717 |
15000 |
304 SS |
Used vertical 15,000 gallon
T304 stainless steel tank 12' diameter X 18' high, flat top and bottom.
Has manhole top, inlets and side bottom outlet. |
| 23482 |
15300 |
SS |
Used approximately 15300
gallon vertical stainless steel tank. Approximately 11' 7" diameter X
19'8" high. Dome top and flat bottom. Shell pressure 3 psig @ 220
degrees F. Type 316 stainless steel. Wall thickness .177". Agitated.
Built by Mason Steel. Nozzles: Top 6", 12", 16" &
24" manway. Side 1 1/2", 1", 3", (2) 4", 6",
10" & 24" manway. |
| 20718 |
15300 |
SS |
Used approximately 15300
gallon vertical stainless steel tank. Approximately 11' 7" diameter X
19'8" high. Dome top and flat bottom. Shell pressure 3 psig @ 220
degrees F. Type 316 stainless steel. Wall thickness .177". Agitated.
Built by Mason Steel. Nozzles: Top 6", 12", 16" &
24" manway. Side 1 1/2", 1", 3", (2) 4", 6",
10" & 24" manway. |
| 20977 |
15600 |
316L SS |
One 15,600 Gal. 316L SS
vertical tank. Flat top and bottom. Has 316L SS inner coils rated for 50
PSI @ 290 deg. Approx. 20 turns of 2" pipe coil. ~351 lin ft.
Equipped with agitator (T-1). 15 HP, 1160 RPM, 550 V. |
| 20979 |
16000 |
304L SS |
One 16,000 Gal. 304L SS
Horizontal tank. Dished heads. 1/2" wall and head thickness. |
| 20978 |
16000 |
304 SS |
One 16,000 gal. 304SS
horizontal Tank. Dished
heads. Approx. 1/2" wall thickness. |
| 20807 |
16000 |
SS |
60,000
liter (16,000 gallons) 304SS vertical jacketed tank. 3075mm diameter x 7.5
meter straight side, welded dished top, 1230mm (48") cone bottom.
Manufactured by Fabrimonca, Serial #E273-E02-1, built 1992. Internal rated
atmospheric @ 2 degree C, jacket rated 5.42 bar @ 60 degree C. 2-zone
24" wide welded 304SS jacket on upper straight side and lower
straight side. Has internal sparger ring. Openings: top 2-75mm; bottom
1-410mm. (6) welded legs 2460mm high. |
| 20806 |
16000 |
SS |
60,000
liter (16,000 gallons) 304SS vertical jacketed tank. 3075mm diameter x 7.5
meter straight side, welded dished top, 1230mm (48") cone bottom.
Manufactured by Fabrimonca, Serial #E273-E02-4, built 1992. Internal rated
atmospheric @ 2 degree C, jacket rated 5.42 bar @ 60 degree C. 2-zone
24" wide welded 304SS jacket on upper straight side and lower
straight side. Has internal sparger ring. Openings: top 2-75mm; bottom
1-410mm. (6) welded legs 2460mm high. |
| 20805 |
16000 |
SS |
60,000
liter (16,000 gallons) 304SS vertical jacketed tank. 3075mm diameter x 7.5
meter straight side, welded dished top, 1230mm (48") cone bottom.
Manufactured by Fabrimonca, Serial #E273-E02-3, built 1992. Internal rated
atmospheric @ 2 degree C, jacket rated 5.42 bar @ 60 degree C. 2-zone
24" wide welded 304SS jacket on upper straight side and lower
straight side. Has internal sparger ring. Openings: top 2-75mm; bottom
1-410mm. (6) welded legs 2460mm high. |
| 20804 |
16000 |
SS |
60,000
liter (16,000 gallons) 304SS vertical jacketed tank. 3075mm diameter x 7.5
meter straight side, welded dished top, 1230mm (48") cone bottom.
Manufactured by Fabrimonca, built 1992. Internal rated atmospheric @ 2
degree C, jacket rated 5.42 bar @ 60 degree C. 2-zone 24" wide welded
304SS jacket on upper straight side and lower straight side. Has internal
sparger ring. Openings: top 2-75mm; bottom 1-410mm. (6) welded legs 2460mm
high. |
| 20803 |
16000 |
SS |
60,000
liter (16,000 gallons) 304SS vertical jacketed tank. 3075mm diameter x 7.5
meter straight side, welded dished top, 1230mm (48") cone bottom.
Manufactured by Fabrimonca, built 1992. Internal rated atmospheric @ 2
degree C, jacket rated 5.42 bar @ 60 degree C. 2-zone 24" wide welded
304SS jacket on upper straight side and lower straight side. Has internal
sparger ring. Openings: top 2-75mm; bottom 1-410mm. (6) welded legs 2460mm
high. |
| 20802 |
16000 |
SS |
16,000
gallon 304SS vertical tank with coil. 10' diameter x 26' straight side,
flat top and bottom. (3) rows of 2" diameter internal pipe coil. Has
ladder on straight side of vessel. Openings: top 1-18", 1-8",
3-2", 1-3"; side 1-18" manway with bolted cover, 1-3";
side bottom 1-10". |
| 20801 |
16000 |
SS |
60,000
liter (16,000 gallons) 304SS vertical jacketed tank. 3075mm diameter x 7.5
meter straight side, welded dished top, 1230mm (48") cone bottom.
Manufactured by Fabrimonca, Serial #E273-E02-2, built 1992. Internal rated
atmospheric @ 2 degree C, jacket rated 5.42 bar @ 60 degree C. 2-zone
24" wide welded 304SS jacket on upper straight side and lower
straight side. Has internal sparger ring. Openings: top 2-75mm; bottom
1-410mm. (6) welded legs 2460mm high. |
| 20800 |
16000 |
SS |
60,000
liter (16,000 gallons) 304SS vertical jacketed tank. 3075mm diameter x 7.5
meter straight side, welded dished top, 1230mm (48") cone bottom.
Manufactured by Fabrimonca, Serial #E273-E02-, built 1992. Internal rated
atmospheric @ 2 degree C, jacket rated 5.42 bar @ 60 degree C. 2-zone
24" wide welded 304SS jacket on upper straight side and lower
straight side. Has internal sparger ring. Openings: top 2-75mm; bottom
1-410mm. (6) welded legs 2460mm high. |
| 20980 |
16250 |
304 SS |
Two (2) Each. 16,250 Gal.
304SS vertical Tanks. Dished top and flat bottom. Has 304 SS coil. T-36
coils are rated for 75 PSI @ 300 deg., T-37 coils are rated for 150 PSI @
300 deg. Both equipped with Philadelphia Mixers. Model= PTECS, 2-speed,
15/7.5 HP, 575 volt. Agitators weigh 7,650 lbs. (each). |
| 24293 |
16500 |
316 SS |
NEW, UNUSED APPROXIMATELY
16,500 GALLON VERTICAL 316 STAINLESS STEEL STORAGE TANK, 10' DIAMETER X
34'6" HIGH ON STRAIGHT SIDE, DISHED TOP AND BOTTOM, BUILT 2002 BY LA
HABRA WELDING, SERIAL #3324, INSTALLED BUT NEVER USED. 20" TOP
MANWAY,(1)10",(2)2",(6)4" TOP NOZZLES.RATED 2PSI INTERNAL
PRESSURE. 4" CENTER BOTTOM OUTLET. APPROX. 55" DISCHARGE HEIGHT. |
| 24292 |
16500 |
316 SS |
NEW, UNUSED APPROXIMATELY
16,500 GALLON VERTICAL 316 STAINLESS STEEL STORAGE TANK, 10' DIAMETER X
34'6" HIGH ON STRAIGHT SIDE, DISHED TOP AND BOTTOM, BUILT 2002 BY LA
HABRA WELDING, SERIAL #3325, INSTALLED BUT NEVER USED. 20" TOP
MANWAY,(1)10",(2)2",(6)4" TOP NOZZLES.RATED 2PSI INTERNAL
PRESSURE. 4" CENTER BOTTOM OUTLET. APPROX. 55" DISCHARGE HEIGHT. |
| 20808 |
17000 |
SS |
17,000
gallon 304SS clad vertical jacketed agitated tank. 12' diameter x 20'
straight side, flat top and bottom. CS plate coil jacket on bottom 1/4 of
straight side. Bridge mounted right angle Phila gear drive. Direct coupled
to 20 HP, 3/60/230/460 volt, 865 rpm TEFC motor. 3" diameter x 18'
long shaft with 4-blade pitch paddle impellor. Openings: top 5-2",
1-3", 1-10", 1-12"; side 3-3", 1-18" with bolted
cover, 1-2". |
| 20719 |
18900 |
SS |
Used 18900 gallon
horizontal stainless steel storage tank. Approx. 8' diameter X 48' long
with dished ends. Built by Mueller. Serial # B-10639-29. Last used to
store water. |
